[1] [1] GAO X, LIU X, YAN P, et al. Numerical analysis and optimization of the microwave inductive heating performance of water film [J]. Int J Heat Mass Tran, 2019, 139: 17-30.

[2] [2] SALAKJANI N K, SINGH P, NIKOLOSKI A N. Acid roasting of spodumene: microwave vs. conventional heating [J]. Miner Eng, 2019, 138: 161-167.

[3] [3] XU L, PENG J, BAI H, et al. Application of microwave melting for the recovery of tin powder [J]. Engineering-prc, 2017, 3(3): 423-427.

[5] [5] WEI W, SHAO Z, ZHANG Y, et al. Fundamentals and applications of microwave energy in rock and concrete processing-a review [J]. Appl Therm Eng, 2019, 157: 113751.

[6] [6] HAYAT K, ABBAS S, HUSSAIN S, et al. Effect of microwave and conventional oven heating on phenolic constituents, fatty acids, minerals and antioxidant potential of fennel seed [J]. Ind Crop Prod, 2019, 140: 111610.

[10] [10] FALCIGLIA P P, ROCCARO P, BONANNO L, et al. A review on the microwave heating as a sustainable technique for environmental remediation/detoxification applications [J]. Renew Sust Energ Rev, 2018, 95: 147-170.

[14] [14] PENG Z, HWANG J. Microwave-assisted metallurgy [J]. Int Mater Rev, 2015, 60(1): 30-63.

[15] [15] BEHREND R, DORN C, UHLIG V, et al. Investigations on container materials in high temperature microwave applications [J]. Energy Procedia, 2017, 120: 417-423.

[16] [16] TAKAHASHI N, HASHIMOTO S, DAIKO Y, et al. High-temperature shrinkage suppression in refractory ceramic fiber board using novel surface coating agent [J]. Ceram Int, 2018, 44(14): 16725-16731.

[17] [17] SHANG X, CHEN J, PENG J. Dynamic Transmission performances of alumina and mullite refractory ceramics in microwave high- temperature heating [J]. High Temp Mater Processes, 2016, 35(1): 113-119.

[18] [18] SHANG X, ZHAI D, ZHANG F, et al. Electromagnetic waves transmission performance of alumina refractory ceramics in 2.45 GHz microwave heating [J]. Ceram Int, 2019, 45(17): 23493-23500.

[19] [19] ZHAI D, WEI C, ZHANG F, et al. Microwave transmission performance of fused silica ceramics in microwave high-temperature heating [J]. Ceram Int, 2019, 45(5): 6157-6162.

[21] [21] YAHALOM A, PINHASI Y, SHIFMAN E, et al. Transmission through single and multiple layers in the 3-10 GHz band and the implications for communications of frequency varying material dielectric constants [J]. WSEAS Trans Commun, 2010, 9(12): 759-772.

[22] [22] LOWE M J S. Matrix techniques for modeling ultrasonic waves in multilayered media [J]. IEEE T Ultrason Ferr, 1995, 42(4): 525-542.

[23] [23] CHEN F, SHEN Q, ZHANG L. Preparation of silicon nitride multilayer ceramic radome material and optimal design of the wall structure [J]. AIP Conf Proc, 2008, 973(1): 889-894.

[24] [24] SUBRAMANIAN S, PACKIRISAMY T, MAHALINGAM M, et al. Scattering coefficients and pathgain of a multilayer tissue structure using ABCD matrix method [J]. J Amb Intel Hum Comp, 2021, 12(6): 6399-6406.

[25] [25] PENG Z, HWANG J, ANDRIESE M, et al. Absorption characteristics of single-layer ceramics under oblique incident microwave irradiation [J]. Ceram Int, 2014, 40(10): 16563-16568.

[26] [26] JIANG S, XU K. Measurement of the electromagnetic properties of materials based on a refined transmission-reflection algorithm [C]//2007 International Symposium on Electromagnetic Compatibility, Qingdao, China, 2007: 178-181.

[27] [27] ZHANG F, ZHAI D, SHANG X, et al. Electromagnetic wave absorbing performance of aspirin powder during 2 450 MHz microwave drying [J]. Dry Technol, 2021, 39(5): 596-607.

[28] [28] OMRAN M, FABRITIUS T, CHEN G, et al. Microwave absorption properties of steelmaking dusts: effects of temperature on the dielectric constant (ε′) and loss factor (ε′′) at 1 064 MHz and 2 423 MHz [J]. RSC Adv, 2019, 9(12): 6859-6870.

[29] [29] TAKANO K, TANAKA Y, MORENO G, et al. Energy loss of terahertz electromagnetic waves by nano-sized connections in near-self-complementary metallic checkerboard patterns [J]. J Appl Phys, 2017, 122(6): 63101.