Optics and Precision Engineering, Volume. 32, Issue 22, 3323(2024)

Research on an auxiliary assembly and calibration system based on the analysis of the spatial modulation function features of the light field time-grid

Chongyu JIN1...2,3, Min FU1,2,3, Jingyue DENG1,2, Li GOU1,2,*, and Maoming RAN12 |Show fewer author(s)
Author Affiliations
  • 1Engineering Research Center of Mechanical Testing Technology and Equipment, Ministry of Education, Chongqing University of Technology, Banan40320, China
  • 2Key Laboratory of Time-gate Sensing and Advanced Detection Technology of Chongqing, Banan40130, China
  • 3National Key Laboratory of Optical Technology and Instruments, Zhejiang University Group, Hangzhou10058, China
  • show less
    Figures & Tables(17)
    Structural diagram of grid linear displacement sensor in single light field
    Principle of light field time grid measurement
    Variation of transparent surface caused by three installation postures (a) schematic of three installation error postures; (b) schematic diagram of area variation caused by assembly error
    Order cycle error diagram of various gestures.
    Schematic diagram of cut area conversion.
    Block diagram of the auxiliary assembly and adjustment system
    Lisayot plots of signals at different phase differences
    Design of experimental system
    Display of the auxiliary assembly system
    Experimental system setup
    Experimental flow diagram
    Output diagram of the auxiliary system without calibration installation
    Images of error and spectral analysis under no calibration mounting
    Diagram of measurement error analysis after the roll Angle calibration
    Single-cycle measurement error at pitch and offset pose
    • Table 2. Association results of mounting attitude error and error

      View table
      View in Article

      Table 2. Association results of mounting attitude error and error

      Spatial anglePitch angle αYaw angle βRoll angle γ
      Standing wave phase relationOrthogonalityOrthogonalityOrthogonality
      Standing wave amplitude relationEqualityEqualityVary
      ErrorLess influenceLess influenceSecond harmonic error
    • Table 3. Table of numerical simulation results

      View table
      View in Article

      Table 3. Table of numerical simulation results

      Roll angle

      (clockwise)

      0.1°1.4°2.3°
      tan(γ-0.001 70.024 40.040 1
      Graphics
      Four sets of amplitude ratios1∶1∶1∶11∶1∶1∶11∶1∶1∶11∶1∶1∶1
      φ90°(Vertical distance D90°91.41°=90°+1.41°109.80°=90°+19.8°122.53°=90°+32.53°
      φ270°(Vertical distance 2D-90°

      -87.17°=

      -90°+2.83°

      -50.40°=

      -90°+39.6°

      -24.93°=

      -90°+65.07°

      φ180°(Vertical distance 3D180°184.24°=180°+4.81°239.40°=180°+59.4°277.60°=180°+97.6°
    Tools

    Get Citation

    Copy Citation Text

    Chongyu JIN, Min FU, Jingyue DENG, Li GOU, Maoming RAN. Research on an auxiliary assembly and calibration system based on the analysis of the spatial modulation function features of the light field time-grid[J]. Optics and Precision Engineering, 2024, 32(22): 3323

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Aug. 22, 2024

    Accepted: --

    Published Online: Mar. 10, 2025

    The Author Email: GOU Li (gouli2019@cqut.edu.cn)

    DOI:10.37188/OPE.20243222.3323

    Topics