Researching | Numerical simulation of oil supply holes flow and optimization of its femtosecond laser processing technology

[1] S Marimuthu, H Elkington, B Smith. Millisecond fibre laser drilling of thick-section aerospace alloy. The International Journal of Advanced Manufacturing Technology, 119, 3437-3447(2022).

[2] H Ohnabe, S Masaki, M Onozuka, et al. Potential application of ceramic matrix composites to aero-engine components. Composites Part A: Applied Science and Manufacturing, 30, 489-496(1999).

[3] H K Sezer, L Li, M Schmidt, et al. Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys. International Journal of Machine Tools & Manufacture: Design, Research and Application, 46, 1972-1982(2006).

[4] Chunhui Wang, Litong Zhang, Yongsheng Liu, et al. Ultra-short pulse laser deep drilling of C/SiC composites in air. Applied Physics A Materials Science& Processing, A111, 1213-1219(2013).

[5] D Holder, R Weber, T Graf, et al. Analytical model for the depth progress of percussion drilling with ultrashort laser pulses. Applied Physics A Materials Science & Processing, 127(2021).

[6] A Franco, C A A Rashed, L Romoli. Analysis of energy consumption in micro-drilling processes. Journal of Cleaner Production, 137, 1260-1269(2016).

[7] [7] Zibner F, Fnaroli C, Holtkamp J, et al. 1 μm adjustmenttolerance f highprecision helical laser drilling[C]Proc SPIE, Optical System Alignment, Tolerancing, Verification IX, 2015, 9582: 95820C.

[8] H M Lee, J H Choi, S J Moon. Determining the machining parameters for femtosecond laser helical drilling of aluminosilicate glass substrate. International Journal of Precision Engineering and Manufacturing, 18, 923-930(2017).

[9] [9] Lendner F. Smart ultra sht pulse laser processing with rotating beam: laser micro drilling, cutting turning[C]Proc SPIE, Laserbased Micro Nanoprocessing XIV, 2020, 11268: 112681Z.

[10] C Fornaroli, J Holtkamp, A Gillner. Laser-beam helical drilling of high quality micro holes. Physics Procedia, 41, 661-669(2013).

[11] D Q Yuan, J K Di, M Zhou, et al. Formation and characteristics of through holes with picosecond-laser helical drilling on alloy material. Journal of Russian Laser Research, 38, 191-198(2017).

[12] Yongsheng Liu, Chunhui Wang, weinan Li, et al. Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser. Journal of Materials Processing Technology, 214, 3131-3140(2014).

[13] Ruoheng Zhang, Weinan Li, Yongsheng Liu, et al. Machining parameter optimization of C/SiC composites using high power picosecond laser. Applied Surface Science, 330, 321-331(2015).

[14] [14] Katopodes N D. FreeSurface Flow: Environmental Fluid Mechanics, Chapter 8Turbulent Flow[M]. Oxfd, United Kingdom: ButterwthHeinemann, 2019: 566650.

[15] [15] Nakayama Y. Introduction to Fluid Mechanics[M]. Oxfd, United Kingdom: ButterwthHeinemann, 2018.