[1] LIANG H, LIN W, WANG Q et al. Ultrahard and stable nanostructured cubic boron nitride from hexagonal boron nitride[J]. Ceramics International, 12788-12794(2020).

[2] ICHIDA Y, OHFUJI H, IRIFUNE T et al. Synthesis of ultrafine nano-polycrystalline cubic boron nitride by direct transformation under ultrahigh pressure[J]. Journal of the European Ceramic Society, 2815-2822(2018).

[3] ICHIDA Y, OHFUJI H, IRIFUNE T et al. Synthesis of coarse-grain-dispersed nano-polycrystalline cubic boron nitride by direct transformation under ultrahigh pressure[J]. Diamond & Related Materials, 25-34(2017).

[4] LIU T, KOU Z, LU J et al. Preparation of superhard cubic boron nitride sintered from commercially available submicron powders[J]. Journal of Applied Physics, 125902(2017).

[5] BUSHLYA V, PETRUSHA I, GUTNICHENKO O et al. Sintering of binderless cubic boron nitride and its modification by β-Si₃N₄ additive for hard machining applications[J]. International Journal of Refractory Metals & Hard Materials, 105100(2020).

[6] SUMIYA H, UESAKA S, SATOH S. Mechanical properties of high purity polycrystalline cBN synthesized by direct conversion sintering method[J]. Journal of Materials Science, 1181-1186(2000).

[7] SUMIYA H, HARANO K, ISHIDA Y. Mechanical properties of nano-polycrystalline cBN synthesized by direct conversion sintering under HPHT[J]. Diamond & Related Materials, 14-19(2014).

[8] YANG M, KOU Z, LIU T et al. Polycrystalline cubic boron nitride prepared with cubic-hexagonal boron nitride under high pressure and high temperature[J]. Chinese Physics B, 056105(2018).

[9] TANIGUCHI T, AKAISHI M, YAMAOKA S. Sintering of cubic boron nitride without additives at 7.7 GPa and above 2000 ℃[J]. Journal of Materials Research, 162-169(1999).

[10] FUJISAKI K, YOKOTA H, FURUSHIRO N et al. Development of ultra-fine-grain binderless cBN tool for precision cutting of ferrous materials[J]. Journal of Materials Processing Technology, 5646-5652(2009).

[11] WANG Z G, WONG Y S, RAHMAN M. High-speed milling of titanium alloys using binderless CBN tools[J]. International Journal of Machine Tools & Manufacture, 105-114(2005).

[12] WANG Z G, RAHMAN M, WONG Y S. Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys[J]. Wear, 752-758(2005).

[13] BUSHLYA V, LENRICK F, GUTNICHENKO O et al. Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiC_p metal matrix composite[J]. Wear, 152-164(2017).

[15] ZHANG J, SUZUKI N, WANG Y et al. Fundamental investigation of ultra-precision ductile machining of tungsten carbide by applying elliptical vibration cutting with single crystal diamond[J]. Journal of Materials Processing Technology, 2644-2659(2014).

[16] ZHANG X, HUANG R, LIU K et al. Suppression of diamond tool wear in machining of tungsten carbide by combining ultrasonic vibration and electrochemical processing[J]. Ceramics International, 4142-4153(2018).

[17] LIU K, LI X P. Ductile cutting of tungsten carbide[J]. Journal of Materials Processing Technology, 348-354(2001).

[18] NAKAMOTO K, KATAHIRA K, OHMORI H et al. A study on the quality of micro-machined surfaces on tungsten carbide generated by PCD micro end-milling[J]. CIRP Annals - Manufacturing Technology, 567-570(2012).

[19] ZHAN Z, HE N, LI L et al. Precision milling of tungsten carbide with micro PCD milling tool[J]. International Journal of Advanced Manufacturing Technology, 2095-2103(2015).

[20] LIU K, LI X P, RAHMAN M et al. CBN tool wear in ductile cutting of tungsten carbide[J]. Wear, 1344-1351(2003).