[1] [1] ZHU Y Q,SHI J F,WANG L L,et al. Current status of the three-dimensional printing technology［J］. Manufacturing Technology & Machine Tool,2015(12): 50-57 (in Chinese).

[2] [2] NGO T D,KASHANI A,IMBALZANO G,et al. Additive manufacturing (3D printing): a review of materials,methods,applications and challenges［J］. Composites Part B: Engineering,2018,143: 172-196.

[3] [3] DING L Y,XU J,QIN Y W. Research and application review of the digital construction technology of 3D printing for construction［J］. Journal of Civil Engineering and Management,2015,32(3): 1-10 (in Chinese).

[4] [4] WANG Z M,LIU W. 3D printing technology and its application in the field of architecture［J］. China Concrete,2015(1): 50-57 (in Chinese).

[5] [5] BANDYOPADHYAY A,HEER B. Additive manufacturing of multi-material structures［J］. Materials Science and Engineering: R: Reports,2018,129: 1-16.

[6] [6] ZHANG C,DENG Z C,MA L,et al. Research progress and application of 3D printing concrete［J］. Bulletin of the Chinese Ceramic Society,2021,40(6): 1769-1795 (in Chinese).

[7] [7] XIA K L,CHEN Y N,LIU C,et al. Research progress on low carbon characters of 3D concrete printing based construction［J］. Journal of Building Structures,2024,45(3): 15-33 (in Chinese).

[8] [8] QING L B,BI M D,ZHAO N,et al. Investigation on the performance of annularly aligned steel fiber reinforced cementitious composites pipe under internal water pressure［J］. Journal of Building Engineering,2024,82: 108205.

[9] [9] REZAEI S M,GHOLAMPOUR A,HOSSEINI S A,et al. Wastepaper fiber-reinforced concrete containing metakaolin: effect on fracture behavior［J］. Structural Concrete,2024: 1: 849.

[10] [10] LIU J W,KANWAL H,TANG C,et al. Study on flexural properties of 3D printed lattice-reinforced concrete structures using acoustic emission and digital image correlation［J］. Construction and Building Materials,2022,333: 127418.

[11] [11] ARUNOTHAYAN A R,NEMATOLLAHI B,RANADE R,et al. Fiber orientation effects on ultra-high performance concrete formed by 3D printing［J］. Cement and Concrete Research,2021,143: 106384.

[12] [12] PANDA B,CHANDRA P S,JEN TAN M. Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material［J］. Materials Letters,2017,209: 146-149.

[13] [13] ZHANG B,ZHAO J L,HUANG T,et al. Effect of fiber angles on hybrid fiber-reinforced polymer-concrete-steel double-skin tubular columns under monotonic axial compression［J］. Advances in Structural Engineering,2020,23(7): 1487-1504.

[14] [14] DONG H. Preparation and performance analysis of polypropylene fiber-reinforced concrete composite［J］. Asia-Pacific Journal of Chemical Engineering,2020,15: e2445.

[15] [15] SHI X X,NING B K,WANG J X,et al. Improving flexural toughness of foamed concrete by mixing polyvinyl alcohol-polypropylene fibers: an experimental study［J］. Construction and Building Materials,2023,400: 132689.

[16] [16] ZHAO G F. Development and applications of concrete and its reinforcing materials［J］. Journal of Building Materials,2000,3(1): 1-6 (in Chinese).

[17] [17] NEEF T,MULLER S,MECHTCHERINE V. 3D printing with carbon concrete: technology and the first test results［J］. Beton-Und Stahlbetonbau. 2020,115(12):943-951.

[18] [18] LARRALDE J. Compressive strength of small concrete specimens confined with fiberglass laminates［J］. Cement,Concrete,and Aggregates,1997,19(1): 17-21.

[19] [19] CHEN J,KANG J J,LIANG X X,et al. Effect of ceramic fiber and steel fiber on mechanical properties of light aggregate concrete［J］. Building Science,2023,39(9): 104-113 (in Chinese).

[20] [20] ZHOU J H,LAI J Z,DU L Y,et al. Effect of directionally distributed steel fiber on static and dynamic properties of 3D printed cementitious composite［J］. Construction and Building Materials,2022,318: 125948.

[21] [21] XIAO J Z,HAN N,ZHANG L H,et al. Mechanical and microstructural evolution of 3D printed concrete with polyethylene fiber and recycled sand at elevated temperatures［J］. Construction and Building Materials,2021,293: 123524.

[22] [22] CHEN W,PAN J L,ZHU B R,et al. Improving mechanical properties of 3D printable ‘one-part’ geopolymer concrete with steel fiber reinforcement［J］. Journal of Building Engineering,2023,75: 107077.

[23] [23] CHEN X H,LI N,ZHONG J J,et al. Effect of fiber content on mechanical anisotropy of rapid setting 3D printing cement-based materials［J］. Concrete,2023(4): 105-109 (in Chinese).

[24] [24] LV C,LIU J. Research progress of polymer fiber reinforced 3D printing concrete materials［J］. Polymer Bulletin,2022(7): 39-47 (in Chinese).

[25] [25] PI Y L,LU C,LI B S,et al. Crack propagation and failure mechanism of 3D printing engineered cementitious composites (3DP-ECC) under bending loads［J］. Construction and Building Materials,2023,408: 133809.

[26] [26] MA L,ZHANG Q,LOMBOIS-BURGER H,et al. Pore structure,internal relative humidity,and fiber orientation of 3D printed concrete with polypropylene fiber and their relation with shrinkage［J］. Journal of Building Engineering,2022,61: 105250.

[27] [27] SUN X Y,ZHOU J W,WANG Q,et al. PVA fibre reinforced high-strength cementitious composite for 3D printing: mechanical properties and durability［J］. Additive Manufacturing,2022,49: 102500.

[28] [28] DING T,XIAO J Z,ZOU S,et al. Anisotropic behavior in bending of 3D printed concrete reinforced with fibers［J］. Composite Structures,2020,254: 112808.

[29] [29] HACK N,DRFLER K,WALZER A N,et al. Structural stay-in-place formwork for robotic in situ fabrication of non-standard concrete structures: a real scale architectural demonstrator［J］. Automation in Construction,2020,115: 103197.

[30] [30] LI Z J. Numerical simulation study on mechanical properties of fiber-reinforced high-performance concrete［J］. Concrete,2023(6): 109-114 (in Chinese).

[31] [31] WANG H L,CHEN J,SUN X Y,et al. Bonding performance between steel wire rope and 3D printed cement-based composites［J］. Journal of Building Structures,2021,42(6): 50-58 (in Chinese).

[32] [32] ZHU B R,PAN J L,ZHOU Z X,et al. Advances in large-scale three dimensional printing technology applied in construction industry［J］. Materials Review,2018,32(23): 4150-4159 (in Chinese).

[33] [33] ZENG J J,LI P L,YAN Z T,et al. Behavior of 3D-printed HPC plates with FRP grid reinforcement under bending［J］. Engineering Structures,2023,294: 116578.

[34] [34] DING T,WANG Z Y,LIU H R,et al. Simulation on pull-out performance of steel bar from 3D-printed concrete［J］. Engineering Structures,2023,283: 115910.

[35] [35] VANTYGHEM G,DE-CORTE W,SHAKOUR E,et al. 3D printing of a post-tensioned concrete girder designed by topology optimization［J］. Automation in Construction,2020,112: 103084.

[36] [36] MECHTCHERINE V,GRAFE J,NERELLA V N,et al. 3D-printed steel reinforcement for digital concrete construction-manufacture,mechanical properties and bond behaviour［J］. Construction and Building Materials,2018,179: 125-137.

[37] [37] SUN H C,LI F R,SHI F T. Experimental study on dynamic mechanical properties of 3D printed cement-based materials under splitting tension after high temperature［J］. Case Studies in Construction Materials,2023,19: e02531.

[38] [38] SOLTAN D G,LI V C. A self-reinforced cementitious composite for building-scale 3D printing［J］. Cement and Concrete Composites,2018,90: 1-13.

[39] [39] COWARD A,SRENSEN J H. 3D printed concrete beams as optimised load carrying structural elements-the minimass beam［J］. Structures,2023,58: 105624.

[40] [40] HACK N,LAUER W V. Mesh-mould: robotically fabricated spatial meshes as reinforced concrete formwork［J］. Architectural Design,2014,84(3): 44-53.

[41] [41] HOU S D,XIAO J Z,DUAN Z H. Preparation of 3D printable concrete with small coarse aggregate and its printability and mechanical properties［J］. Journal of Building Materials,2022,25(7): 730-736 (in Chinese).

[42] [42] ZHANG Y M. 3D-printed building contributes to construction of beautiful villages［J］. Bulletin of the Chinese Ceramic Society,2022,41(9): 3344-3345 (in Chinese).

[43] [43] LIU X F,LI Q,LI J X. Shrinkage and mechanical properties optimization of spray-based 3D printed concrete by PVA fiber［J］. Materials Letters,2022,319: 132253.

[44] [44] LI L G,XIAO B F,CHENG C M,et al. Adding glass fibers to 3D printable mortar: effects on printability and material anisotropy［J］. Buildings,2023,13(9): 2295.

[45] [45] ZHANG C,DENG Z C,WANG Z B,et al. Effects of fibers on printing performance and mechanical properties of 3D printing concrete［J］. Bulletin of the Chinese Ceramic Society,2021,40(6): 1870-1878+1888 (in Chinese).

[46] [46] LIM J H,PANDA B,PHAM Q C. Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement［J］. Construction and Building Materials,2018,178: 32-41.

[47] [47] YUE G J,WANG J,WU Y,et al. Experimental research and numerical simulation on the fracture mechanical properties of 3D printed carbon fiber reinforced concrete［J］. Journal of Building Structures,2023,7: 1-15 (in Chinese).

[48] [48] ZHU B R,PAN J L,ZHOU Z X,et al. Mechanical properties of engineered cementitious composites beams fabricated by extrusion-based 3D printing ［J］. Engineering Structures,2021,238: 112201.

[49] [49] XIAO J Z,LIU H R,DING T,et al. Rebar-free concrete construction: concept,opportunities and challenges［J］. Journal of Building Engineering,2024,86: 108933.

[50] [50] WANG Z B,JIA L T,DENG Z C,et al. Bond behavior between steel bars and 3D printed concrete: effect of concrete rheological property,steel bar diameter and paste coating［J］. Construction and Building Materials,2022,349: 128708.

[51] [51] LIU B,LIU X Y,LI G T,et al. Study on anisotropy of 3D printing PVA fiber reinforced concrete using destructive and non-destructive testing methods［J］. Case Studies in Construction Materials,2022,17: e01519.

[52] [52] SUN X Y,WANG Q,WANG H L,et al. Influence of multi-walled nanotubes on the fresh and hardened properties of a 3D printing PVA mortar ink［J］. Construction and Building Materials,2020,247: 118590.

[53] [53] SUN J B,ASLANI F,LU J,et al. Fibre-reinforced lightweight engineered cementitious composites for 3D concrete printing［J］. Ceramics International,2021,47(19): 27107-27121.

[54] [54] IBRAHIM K A,VAN ZIJL G P A G,BABAFEMI A J. Comparative studies of LC3- and fly ash-based blended binders in fibre-reinforced printed concrete (FRPC): rheological and quasi-static mechanical characteristics［J］. Journal of Building Engineering,2023,80: 108016.

[55] [55] UDDIN M N,YE J H,DENG B Y,et al. Interpretable machine learning for predicting the strength of 3D printed fiber-reinforced concrete (3DP-FRC)［J］. Journal of Building Engineering,2023,72: 106648.

[56] [56] WANG L,WANG F C,LI R,et al. Interfacial constitutive model of 3D printed fiber reinforced concrete composites and its experimental validation［J］. Case Studies in Construction Materials,2024,20: e02807.

[57] [57] REINOLD J,GUDULI V,MESCHKE G. Computational modeling of fiber orientation during 3D-concrete-printing［J］. Computational Mechanics,2023,71(6): 1205-1225.

[58] [58] NGUYEN V V,LIU J L,LI S,et al. Modelling of 3D-printed bio-inspired bouligand cementitious structures reinforced with steel fibres［J］. Engineering Structures,2023,274: 115123.

[59] [59] ZHAN Y J. Numerical simulation of the failure behavior of 3D-printed concrete with fiber reinforcement［J］. Jiangxi Science,2017,35(6): 927-932 (in Chinese).

[60] [60] XIAO X W,TIAN W,MIAO D M. Application of 3D printing technology in building field［J］. Construction Technology,2015,44(10): 79-83 (in Chinese).

[61] [61] MA G W,LI Z J,WANG L,et al. Micro-cable reinforced geopolymer composite for extrusion-based 3D printing［J］. Materials Letters,2019,235: 144-147.

[62] [62] HEIDARNEZHAD F,ZHANG Q. Shotcrete based 3D concrete printing: state of art,challenges,and opportunities［J］. Construction and Building Materials,2022,323: 126545.

[63] [63] LIU M,WANG L,MA G W,et al. U-type steel wire mesh for the flexural performance enhancement of 3D printed concrete: a novel reinforcing approach［J］. Materials Letters,2023,331: 133429.

[64] [64] CLASSEN M,UNGERMANN J,SHARMA R. Additive manufacturing of reinforced concrete: development of a 3D printing technology for cementitious composites with metallic reinforcement［J］. Applied Sciences,2020,10(11): 3791.

[65] [65] XU Z Y,LI H,ZHANG D W,et al. Research progress of cementitious materials and related properties for building 3D printing［J］. Materials Reports,2023,37(12): 97-110 (in Chinese).

[66] [66] SUN X Y,YE B X,WANG H L,et al. Recent development on reinforcing technology of 3D printing concrete materials and structure［J］. Journal of the Chinese Ceramic Society,2021,49(5): 878-886 (in Chinese).

[67] [67] MARCHMENT T,SANJAYAN J. Reinforcement method for 3D concrete printing using paste-coated bar penetrations［J］. Automation in Construction,2021,127: 103694.

[68] [68] MARCHMENT T,SANJAYAN J. Mesh reinforcing method for 3D concrete printing［J］. Automation in Construction,2020,109: 102992.

[69] [69] WANG H L,CHEN J,GAO C,et al. Research development on 3D printing technology of cementitious materials［J］. China Building Materials Science & Technology,2021,30(3): 2-7 (in Chinese).

[70] [70] HAMBACH M,VOLKMER D. Properties of 3D-printed fiber-reinforced Portland cement paste［J］. Cement and Concrete Composites,2017,79: 62-70.

[71] [71] KAZEMIAN A,YUAN X,COCHRAN E,et al. Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture［J］. Construction and Building Materials,2017,145: 639-647.

[72] [72] YU K Q,MCGEE W,NG T Y,et al. 3D-printable engineered cementitious composites (3DP-ECC): fresh and hardened properties［J］. Cement and Concrete Research,2021,143: 106388.

[73] [73] GENG Z F,SHE W,ZUO W Q,et al. Layer-interface properties in 3D printed concrete: dual hierarchical structure and micromechanical characterization［J］. Cement and Concrete Research,2020,138: 106220.

[74] [74] LI Z J,WANG L,MA G W. Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions［J］. Composites Part B: Engineering,2020,187: 107796.

[75] [75] CHIHI M,TARFAOUI M,QURESHI Y,et al. Experimental investigation of the effect of infill parameters on dynamic compressive performance of 3D-Printed carbon fiber reinforced polyethylene terephthalate glycol composites［J］. Journal of Thermoplastic Composite Materials,2023: 1: 222805.

[76] [76] BRESEGHELLO L,HAJIKARIMIAN H,JRGENSEN H B,et al. 3DLightBeam+. Design,simulation,and testing of carbon-efficient reinforced 3D concrete printed beams［J］. Engineering Structures,2023,292: 116511.

[77] [77] LIU M,ZHANG Q Y,TAN Z D,et al. Investigation of steel wire mesh reinforcement method for 3D concrete printing［J］. Archives of Civil and Mechanical Engineering,2021,21(1): 24.

[78] [78] ZHONG X M,ZOU S H. Research on properties of 3D printed concrete based on grid enhancement［J］. Real Estate World,2020(16): 139-140 (in Chinese).

[79] [79] XU Y D,AVIJA B. Development of strain hardening cementitious composite (SHCC) reinforced with 3D printed polymeric reinforcement: mechanical properties［J］. Composites Part B: Engineering,2019,174: 107011.

[80] [80] LIU Q,CHENG S B,SUN C,et al. Steel cable bonding in fresh mortar and 3D printed beam flexural behavior［J］. Automation in Construction,2024,158: 105165.

[81] [81] ZHANG D B,FENG P,ZHOU P Z,et al. 3D printed concrete walls reinforced with flexible FRP textile: automatic construction,digital rebuilding,and seismic performance［J］. Engineering Structures,2023,291: 116488.

[82] [82] WU L,KANG Q,WAN Z M. Experimental research on mechanical properties of printed truss-type reinforced concrete beam［J］. Industrial Construction,2021,51(6): 24-28 (in Chinese).

[83] [83] SUN X Y,SHEN J Y,WANG H L,et al. Bending behavior of composite beam with 3D printed concrete permanent formwork［J］. China Civil Engineering Journal,2022,55(10): 1-10 (in Chinese).

[84] [84] ZHANG Z C,YE Z K,SUN X Y,et al. Numerical simulation analysis on compressive performance of composite columns with 3D printed concrete permanent formwork［J］. Journal of Civil and Environmental Engineering,2024,46(1): 194-206 (in Chinese).