[1] [1] SEBASTIAN T,KOZIELSKI L,ERHART J. Co-sintered PZT ceramics for the piezoelectric transformers［J］. Ceramics International,2015,41(8): 9321-9327.

[2] [2] BOWEN C R,KIM H A,WEAVER P M,et al. Piezoelectric and ferroelectric materials and structures for energy harvesting applications［J］. Energy Environ Sci,2014,7(1): 25-44.

[3] [3] LIU X J,CHEN R W. Current situation and developing trend of piezoelectric vibration energy harvesters［J］. Journal of Vibration and Shock,2012,31(16): 169-176 (in Chinese).

[4] [4] GAO J H,XUE D Z,LIU W F,et al. Recent progress on BaTiO3-based piezoele-ctric ceramics for actuator applications［J］. Actuators,2017,6(3): 24.

[5] [5] WEI X X,LIU Y H,ZHAO D J,et al. 3D printing of piezoelectric Barium titanate with high density from milled powders［J］. Journal of the European Ceramic Society,2020,40(15): 5423-5430.

[6] [6] LIU W F,ZHOU C,GAO J H,et al. Progress in lead-free piezoelectric ceramics［J］. Materials China,2016,35(6): 423-428 (in Chinese).

[7] [7] LAKHDAR Y,TUCK C,BINNER J,et al. Additive manufacturing of advanced ceramic materials［J］. Progress in Materials Science,2021,116: 100736.

[8] [8] WANG T T,LU X F,WANG A. A review: 3D printing of microwave absorption ceramics［J］. International Journal of Applied Ceramic Technology,2020,17(6): 2477-2491.

[9] [9] CHEN Z W,LI Z Y,LI J J,et al. 3D printing of ceramics: a review［J］. Journal of the European Ceramic Society,2019,39(4): 661-687.

[10] [10] HAN Z Q,LI L,LIU S H,et al. Research on rheological properties of stereolithography ZrO2 ceramic slurry［J］. Bulletin of the Chinese Ceramic Society,2021,40(6): 1965-1971 (in Chinese).

[11] [11] WANG F,LI L,SONG T,et al. Preparation and sintering of porous silicon nitride ceramics based on melt deposition technology［J］. Advanced Ceramics,2023,44(supplement 1): 461-472 (in Chinese).

[12] [12] LI K H,ZHAO Z. The effect of the surfactants on the formulation of UV-curable SLA alumina suspension［J］. Ceramics International,2017,43(6): 4761-4767.

[13] [13] LI S,DUAN W Y,ZHAO T,et al. The fabrication of SiBCN ceramic components from preceramic polymers by digital light processing (DLP) 3D printing technology［J］. Journal of the European Ceramic Society,2018,38(14): 4597-4603.

[14] [14] CUI X M,OUYANG S X,YU Z Y,et al. A study on green tapes for LOM with water-based tape casting processing［J］. Materials Letters,2003,57(7): 1300-1304.

[15] [15] FINA F,GOYANES A,GAISFORD S,et al. Selective laser sintering (SLS) 3D printing of medicines［J］. International Journal of Pharmaceutics,2017,529(1/2): 285-293.

[16] [16] GOYANES A,BUANZ A B M,BASIT A W,et al. Fused-filament 3D printing (3DP) for fabrication of tablets［J］. International Journal of Pharmaceutics,2014,476(1/2): 88-92.

[17] [17] CHEN W C,WANG F F,YAN K,et al. Micro-stereolithography of KNN-based lead-free piezoceramics［J］. Ceramics International,2019,45(4): 4880-4885.

[18] [18] ZENG Y S,JIANG L M,SUN Y Z,et al. 3D-printing piezoelectric composite with honeycomb structure for ultrasonic devices［J］. Micromachines,2020,11(8): 713.

[19] [19] CHENG J,CHEN Y,WU J W,et al. 3D printing of BaTiO3 piezoelectric ceramics for a focused ultrasonic array［J］. Sensors,2019,19(19): 4078.

[20] [20] MORENO R. Better ceramics through colloid chemistry［J］. Journal of the European Ceramic Society,2020,40(3): 559-587.

[21] [21] ZOU R F,BI L N,HUANG Y,et al. A biocompatible silicon nitride dental implant material prepared by digital light processing technology［J］. Journal of the Mechanical Behavior of Biomedical Materials,2023,141: 105756.

[22] [22] WU X Q,XU C J,ZHANG Z M. Preparation and optimization of Si3N4 ceramic slurry for low-cost LCD mask stereolithography［J］. Ceramics International,2021,47(7): 9400-9408.

[23] [23] QIU P,CHEN J Q,SUN W F,et al. Improved DC dielectric performance of photon-initiated crosslinking polyethylene with TMPTMA auxiliary agent［J］. Materials,2019,12(21): 3540.

[24] [24] WANG Y N,ZHANG Y Q,SONG S C,et al. Laser stereolithography for zirconia ceramic fabrication and its debinding and sintering process［J］. Journal of Inorganic Materials,2022,37(3): 303-309 (in Chinese).

[25] [25] ZHU J Y,ZHANG C,LUO Z Q,et al. Influence of debinding process on the properties of photopolymerization 3D printed cordierite ceramics［J］. Journal of Inorganic Materials,2022,37(3): 317-324 (in Chinese).

[26] [26] MA N,ZHANG B P,YANG W G,et al. Phase structure and nano-domain in high performance of BaTiO3 piezoelectric ceramics［J］. Journal of the European Ceramic Society,2012,32(5): 1059-1066.

[27] [27] CHEN Z Y,SONG X,LEI L W,et al. 3D printing of piezoelectric element for energy focusing and ultrasonic sensing［J］. Nano Energy,2016,27: 78-86.

[28] [28] SONG X,CHEN Z Y,LEI L W,et al. Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions［J］ Rapid Prototyping Journal,2017,23(1): 44-53.