[1] [1] JOHNSTON R D, CHIPMAN R D, KNAPP W J. Prestressed ceramics as a structural material[J]. J Am Ceram Soc, 1953, 36(4): 121-126.

[2] [2] GREEN D J, TANDON R, SGLAVO V M. Crack arrest and multiple cracking in glass through the use of designed residual stress profiles[J]. Science, 1999, 283(5406): 1295-1297.

[3] [3] WONDRACZEK L, MAURO J C, ECKERT J, et al. Towards ultrastrong glasses[J]. Adv Mater, 2011, 23(39): 4578-4586.

[6] [6] NODEH A A, BARARTI S B, HEJAZI Z, et al. Compositional modification to porcelain opaque glazes by using zirconium silicate[J]. J Aust Ceram Soc, 2015, 51(1): 79-88.

[7] [7] GORDON D V. High-fire opaque glazes for zircon bodies[J]. J Am Ceram Soc, 1951, 34(2): 33-38.

[8] [8] DONDI M, ESPOSITO M. Zirconium silicate: origin, production, radioactivity[J]. Ceram Int, 2009, 27(4):49-53.

[10] [10] LUTTRELL C B. Glaze for zircon porcelains[J]. J Am Ceram Soc, 1949, 32(10): 327-332.

[11] [11] MCLEAN J W, HUGHES T H. The reinforcement of dental porcelain with ceramic oxides[J]. Br Dent J, 1965, 119(6): 251-267.

[12] [12] SOUTHAN D E. Bridge design and laboratory procedures in dental ceramics[J]. Aust Dent J, 1981, 26(6): 407-408.

[13] [13] GUO X, HUI Y, ZHANG L, et al. Sintering behavior, microstructure and mechanical properties of silicon carbide ceramics containing different nano-TiN additive[J]. Ceram Int, 2010, 36(1): 161-165.

[15] [15] TAKASHI A, MIHO T, TAKAHITO S, et al. Strengthening in porcelain reinforced with alumina particles[J]. J Ceram Soc JPN, 2020, 128(12): 1045-1054.

[16] [16] ISMAHAN S, ABDELHAMID H, SOUAD K, et al. Effect of ZrO2 additions on densification and mechanical properties of modified resistant porcelains using economic raw materials[J]. J Aust Ceram Soc, 2019, 55(2): 489-499.

[17] [17] YANG S, CHEN J, CHEN P, et al. Effect of Cr2AlC particle on the dispersion strengthening of CLF-1 steel[J]. Fusion Eng Des, 2022, 177: 113076.

[19] [19] KINGERY W D, BOWEN H K, UHLMANN D R. Introduction to ceramics[M]. J Electrochem Soc, 1977, 124(3): 152.

[22] [22] CARTY W M, SENAPATI U. Porcelain—raw materials, processing, phase evolution, and mechanical behavior[J]. J Am Chem Soc, 1998, 81(1): 3-20.

[23] [23] BAO Y W, LIU C C, HUANG J L. Effects of residual stresses on strength and toughness of particle-reinforced TiN/Si3N4 composite: theoretical investigation and FEM simulation[J]. Mater Sci Eng, 2006, 434(1/2): 250-258.