[1] [1] ZENG Y B, JIANG SH S, HUANG C H, et al.. Application of laser scanning confocal microscope in micro-electro-mechanical system ［J］. Optics and Precision Engineering, 2008, 16(7): 1241-1246. (in Chinese)

[2] [2] LI X Y, LI H M, CHANG H L, et al.. System-level modeling for MEMS optical components ［J］. Opt. Precision Eng., 2012, 20(5): 1069-1075. (in Chinese)

[3] [3] ZHANG J, WU W R, BI L. Trans-scale assembly method of micro-particles in 3D space ［J］. Opt. Precision Eng., 2017, 25(1): 115-122. (in Chinese)

[4] [4] NI X X, WANG ZH SH, CHEN H M, et al.. A hybrid-driven active clamp forward converter based on LM5027 ［C］. Proceedings of the 26th Annual IEEE Applied Power Electronics Conference and Exposition (APEC), IEEE, 2011: 1516-1520.

[5] [5] YU L ZH, CHEN J. General control model for bionic inchworm robot moving modes based on discrete hopfield neural network ［C］. Proceedings of the 2nd International Conference on Intelligent System Design and Engineering Application (ISDEA), IEEE, 2012: 687-690.

[6] [6] MUJJALINVIMUT E, KONGHIRUN M, LAORATANAKUL P. A design study of ultrasonic motor drive ［C］. Proceedings of the 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), IEEE, 2009: 274-277.

[7] [7] BERGANDER A, BREGUET J M, SCHMITT C, et al.. Micropositioners for microscopy applications based on the stick-slip effect ［C］. Proceedings of 2000 International Symposium on Micromechatronics and Human Science, IEEE, 2000: 213-216.

[8] [8] BREGUET J M, CLAVEL R. Stick and slip actuators: design, control, performances and applications ［C］. Proceedings of 1998 International Symposium on Micromechatronics and Human Science, IEEE, 1998: 89-95.

[9] [9] BREGUET J M, DRIESEN W, KAEGI F, et al.. Applications of piezo-actuated micro-robots in micro-biology and material science ［C］. Proceedings of 2007 International Conference on Mechatronics and Automation (ICMA), IEEE, 2007: 57-62.

[10] [10] ZHANG SH ZH, RONG W B, TAI G A, et al.. Designing and dynamic modeling of 1D nanopositioner based on stick-slip motion principle ［J］. Journal of Mechanical Engineering, 2012, 48(19): 29-34. (in Chinese)

[11] [11] YANG F Y, PAN P, XU W, et al.. Friction adjustable stick-slip positioning stage based on piezoelectric ceramics ［J］. Piezoelectrics & Acoustooptics, 2017, 39(6): 825-828, 833. (in Chinese)

[12] [12] LI Z W, ZHONG B W, WANG ZH H, et al.. Large thrust trans-scale precision positioning stage based on inertial stick-slip driving ［J］. Transactions of Nanjing University of Aeronautics and Astronautics, 2015, 32(2): 204-209.

[13] [13] MADI M S, KHAYATI K, BIGRAS P. Parameter estimation for the LuGre friction model using interval analysis and set inversion ［C］. Proceedings of 2004 IEEE International Conference on Systems, Man and Cybernetics, IEEE, 2004: 428-433.

[14] [14] BARAHANOV N, ORTEGA R. Necessary and sufficient conditions for passivity of the LuGre friction model ［J］. IEEE Transactions on Automatic Control, 2000, 45(4): 830-832.

[15] [15] PAN P. Study of Nanopositioner with Cross-scale Travel Based on Stick-slip Principle ［D］. Suzhou: Soochow University, 2016. (in Chinese)

[16] [16] ZHONG B W. Research on Key Technologies of Cross-scale Precision Movement Stage Based on Stick-slip Driving ［D］. Harbin: Harbin Institute of Technology, 2012. (in Chinese)