Optics and Precision Engineering, Volume. 24, Issue 4, 855(2016)
Gas-liquid-solid abrasive flow polishing and its process parameter optimization
[1] [1] BAI Y, ZHANG F, LI L X, et al.. Manufacture of silicon modification layer on Silicon Carbide surface by magnetorheological finishing[J].Acta Optica Sinica, 2015, 35(3): 308-315. (in Chinese)
[4] [4] PAN X, MA ZH B, GAO P, et al.. Polishing diamond coatings by combination of electron cyclotron resonance plasma etching and mechanical polishing[J]. Chinese Journal of Vacuum Science and Technology, 2015(2): 174-178. (in Chinese)
[5] [5] JI SH M, CHI Y W, TAN D P. Research of abrasive injection process to the wall and machining characteristic of soft abrasive flow machining[J]. Journal of Mechanical Engineering, 2012, 48(13): 174-183. (in Chinese)
[6] [6] PANG Y X, TANG Y, LIANG L, et al.. Flow field simulation and experimental research on interactive erosion and cavitation wears in three phases[J]. Journal of Mechanical Engineering, 2012, 48(3): 115-120. (in Chinese)
[7] [7] FU Q, YUAN SH Q, ZHU R SH, et al.. Numerical simulation and experiment on gas-liquid-solid multiphase flow in centrifugal pump[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2012, 28(14): 52-57. (in Chinese)
[8] [8] ZHANG Z X, DONG Z N. Viscous Fluid Mechanics[M]. Beijing: Tsinghua University Press, 2011. (in Chinese)
[9] [9] SHIH T, LIOU W W, SHABBIR A, et al.. A new eddy viscosity model for high reynolds number turbulent flows[J]. Computers & Fluids, 1995, 24(3): 227-238.
[10] [10] ZHAO B J, YUAN SH Q, LIU H L, et al.. Simulation of solid-liquid two-phase turbulent flow in double-channel pump based on Mixture model[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2008, 24(1): 7-12. (in Chinese)
[12] [12] JI SH M, FU Y ZH, TAN D P. Numerical analysis and processing experiment of double-inlet restraint flow field in the soft abrasive flow machining[J]. Journal of Mechanical Engineering, 2012, 48(19): 177-185. (in Chinese)
[13] [13] LI CH, JI SH M, TAN D P, et al.. Study of near wall area micro-cutting mechanism and finishing characteristics for softness abrasive flow finishing [J]. Journal of Mechanical Engineering, 2014, 50(9): 161-168. (in Chinese)
Get Citation
Copy Citation Text
JI Shi-Ming, HUANG Xi-Huan, TAN Da-Peng, TAN Yun-Feng. Gas-liquid-solid abrasive flow polishing and its process parameter optimization[J]. Optics and Precision Engineering, 2016, 24(4): 855
Category:
Received: Sep. 19, 2015
Accepted: --
Published Online: Jun. 6, 2016
The Author Email: Shi-Ming JI (jishiming@zjut.edu.cn)