Journal of the Chinese Ceramic Society, Volume. 51, Issue 3, 698(2023)
Preparation and Property of BaTiO3 Ceramics by Ultrafast-High Temperature Sintering
[6] [6] WANG C, PING W, BAI Q, et al. A general method to synthesize and sinter bulk ceramics in seconds[J]. Science, 2020, 368: 521-526.
[7] [7] WANG R, DONG Q, WANG C, et al. High-temperature ultrafast sintering: Exploiting a new kinetic region to fabricate porous solid- state electrolyte scaffolds[J]. Adv Mater, 2021, 33: 2100726.
[8] [8] LIN Y, LUO N, QUATTROCCHI E, et al. Ultrafast high-temperature sintering (UHS) of Li1. 3Al0. 3Ti1. 7(PO4)3[J]. Ceram Intern, 2021, 47: 21982-21987.
[9] [9] IHRIG M, MISSHRA T P, SCHELD W S, et al. Li7La3Zr2O12 solid electrolyte sintered by the ultrafast high-temperature method[J]. J Eur Ceram Soc, 2021, 41: 6075-6079.
[10] [10] GUO R, MAO H, ZHAO Z, et al. Ultrafast high-temperature sintering of bulk oxides[J]. Scr Mater, 2021, 193: 103-107.
[11] [11] KERMANI M, DONG J, BIESUZ M, et al. Ultrafast high-temperature sintering (UHS) of fine grained α-Al2O3[J]. J Eur Ceram Soc, 2021, 41: 6626-6633.
[12] [12] LUO R, KERMANI M, GUO Z, et al. Ultrafast high-temperature sintering of silicon nitride: A comparison with the state-of-the-art techniques[J]. J Eur Ceram Soc, 2021, 41: 6338-6345.
[13] [13] DONG J, POUCHLY V, BIESUZ M, et al. Thermally-insulated ultra-fast high temperature sintering (UHS) of zirconia: A master sintering curve analysis[J]. Scr Mater, 2021, 203: 114076.
[14] [14] BIESUZ M, GALOTTA A, MOTTA A, et al. Speedy bioceramics: Rapid densification of tricalcium phosphate by ultrafast high- temperature sintering[J]. Mat Sci Eng C-Mater, 2021, 127: 112246.
[15] [15] ACOSTA M, NOVAK N, ROJAS V, et al. BaTiO3-based piezoelectrics: Fundamentals, current status, and perspectives[J]. Appl Phys Rev, 2017, 4: 041305.
[16] [16] CHO Y K, KANG S J L, YOON D Y. Dependence of grain growth and grain-boundary structure on the Ba/Ti ratioin BaTiO3[J]. J Am Ceram Soc, 2004, 87(1): 119-124.
[17] [17] OONISHI K, MOROHASHI T, UCHINO K, HIP sintering of fine grained barium titanate[J]. J Ceram Soc Jpn, 1989, 97: 473-477.
[18] [18] KIM H T, HAN Y H, Sintering of nanocrystalline BaTiO3[J]. Ceram Intern, 2004, 30: 1719-1723.
[19] [19] TAKEUCHI T, SUYAMA Y, SINCLAIR D C, et al. Spark-plasma- sintering of fine BaTiO3 powder prepared by a sol-crystal method. J Mater Sci, 2001, 36: 2329-2334.
[20] [20] LUAN W, GAO L, KAWAOKA H, et al. Fabrication and characteristics of fine-grained BaTiO3 ceramics by spark plasma sintering[J]. Ceram Intern, 2004, 30: 405-410.
[21] [21] MAIWA H, Preparation and properties of BaTiO3 ceramics by spark plasma sintering[J]. Jpn J Appl Phys, 2008, 47(9): 7646-7649.
[22] [22] TAKAHASHI H, NUMAMOTO Y, TANI J, et al. Piezoelectric properties of BaTiO3 ceramics with high performance fabricated by microwave sintering[J]. Jpn J Appl Phys, 2006, 45(9B): 7405-7408.
[23] [23] M’PEKO J C, FRANCIS J S C, RAJ R. Field-assisted sintering of undoped BaTiO3: Microstructure evolution and dielectric permittivity[J]. J Eur Ceram Soc, 2014, 34: 3655-3660.
[24] [24] MA J P, CHEN X M, OUYANG W Q, et al. Microstructure, dielectric, and energy storage properties of BaTiO3 ceramics prepared via cold sintering[J]. Ceram Inter, 2018, 44(4): 4436-4441.
[25] [25] REN K, HUANG S, CAO Y, et al. The densification behavior of flash sintered BaTiO3[J]. Scr Mater, 2020, 186: 362-365.
[26] [26] HU W, LIU Y, WITHERS R L, et al. Electron-pinned defect-dipoles for high-performance colossal permittivity materials[J]. Nat Mater, 2013, 12: 821-826.
[27] [27] TAN Y, ZHANG J, WU Y, et al. Unfolding grain size effects in barium titanate ferroelectric ceramics[J]. Sci Rep, 2015, 5: 9953.
Get Citation
Copy Citation Text
LENG Senlin, LIU Qiang, CAO Zhenzhu, YAN Shuang, CAO Yanping. Preparation and Property of BaTiO3 Ceramics by Ultrafast-High Temperature Sintering[J]. Journal of the Chinese Ceramic Society, 2023, 51(3): 698
Category:
Received: Jun. 22, 2022
Accepted: --
Published Online: Apr. 10, 2023
The Author Email: Senlin LENG (lengsenlin@sohu.com)
CSTR:32186.14.