Researching | Rapid Preparation of Iris and Color Composite Patterns by Laser Direct Writing

Chinese Journal of Lasers, Volume. 51, Issue 12, 1202203(2024)

Rapid Preparation of Iris and Color Composite Patterns by Laser Direct Writing

Di Peng, Dazheng Wang, and Guowei Zhang^*

Author Affiliations

College of Light Industry Science and Engineering, Tianjin University of Science and Technology, Tianjin 300457, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (7)

References (28)

Paper Information

References(28)

[1] Dusser B, Sagan Z, Soder H et al. Controlled nanostructrures formation by ultra fast laser pulses for color marking[J]. Optics Express, 18, 2913-2924(2010).

[2] Ageev E I, Veiko V P, Vlasova E A et al. Controlled nanostructures formation on stainless steel by short laser pulses for products protection against falsification[J]. Optics Express, 26, 2117-2122(2018).

[3] Xu L M, Liu H G, Chua T C et al. Fabrication of SERS substrates by femtosecond LIPAA for detection of contaminants in foods[J]. Optics & Laser Technology, 151, 107954(2022).

[4] Liang M S, Li X, Wang M M et al. Spatially-shaped femtosecond laser manufacturing of microgrooves in metals[J]. Chinese Journal of Lasers, 48, 0202003(2021).

[5] Jiao Z Z, Li J C, Chen Z D et al. Research progress on laser processing of antireflection surfaces[J]. Chinese Journal of Lasers, 48, 0202011(2021).

[6] Jwad T, Penchev P, Nasrollahi V et al. Laser induced ripples’ gratings with angular periodicity for fabrication of diffraction holograms[J]. Applied Surface Science, 453, 449-456(2018).

[7] Wlodarczyk K L, Ardron M, Weston N J et al. Holographic watermarks and steganographic markings for combating the counterfeiting practices of high-value metal products[J]. Journal of Materials Processing Technology, 264, 328-335(2019).

[8] Zhou Y L, Lei M, Wang C L et al. Influences of laser etching on optical and electrical properties of Ag/FTO/AZO thin films[J]. Chinese Journal of Lasers, 49, 0202007(2022).

[9] Liu R J, Zhang D S, Li Z G. Femtosecond laser induced simultaneous functional nanomaterial synthesis, in situ deposition and hierarchical LIPSS nanostructuring for tunable antireflectance and iridescence applications[J]. Journal of Materials Science & Technology, 89, 179-185(2021).

[10] Wang H Z, Yin Y R, Dou Z Q et al. Laser coloring of stainless steel[J]. Laser & Optoelectronics Progress, 60, 0916001(2023).

[11] Zhang L D, Li H F, An F S et al. Elman-neural-network based prediction of microsecond laser coloring on stainless steel[J]. Chinese Journal of Lasers, 49, 0802010(2022).

[12] Lehmuskero A, Kontturi V, Hiltunen J et al. Modeling of laser-colored stainless steel surfaces by color pixels[J]. Applied Physics B, 98, 497-500(2010).

[13] Li G Q, Li J W, Hu Y L et al. Femtosecond laser color marking stainless steel surface with different wavelengths[J]. Applied Physics A, 118, 1189-1196(2015).

[14] Liu Y H, Kuo K K, Cheng C W et al. Femtosecond laser two-beam interference applied to 4H-SiC surface hierarchical micro-nano structure fabrication[J]. Optics & Laser Technology, 151, 108081(2022).

[15] Wu H, Jiao Y L, Zhang C C et al. Large area metal micro-/ nano-groove arrays with both structural color and anisotropic wetting fabricated by one-step focused laser interference lithography[J]. Nanoscale, 11, 4803-4810(2019).

[16] Sun X Y, Wang W J, Mei X S et al. Femtosecond laser-induced periodic oxidization of titanium film: structural colors both in reflection and transmission mode[J]. Optical Materials, 109, 110240(2020).

[17] Veiko V, Odintsova G, Ageev E et al. Controlled oxide films formation by nanosecond laser pulses for color marking[J]. Optics Express, 22, 24342-24347(2014).

[18] Kučera M, Martan J, Franc A. Time-resolved temperature measurement during laser marking of stainless steel[J]. International Journal of Heat and Mass Transfer, 125, 1061-1068(2018).

[19] Xiang Y F, Mei R L, Azad F et al. Investigation by nanosecond fiber laser for hybrid color marking and its potential application[J]. Optics & Laser Technology, 147, 107553(2022).

[20] Cui C Y, Cui X G, Ren X D et al. Surface oxidation phenomenon and mechanism of AISI 304 stainless steel induced by Nd∶YAG pulsed laser[J]. Applied Surface Science, 305, 817-824(2014).

[21] Lu G X, Trdan U, Zhang Y K et al. The distribution regularity of residual stress on a metal surface after laser shock marking[J]. Mechanics of Materials, 143, 103310(2020).

[22] Shi X Y, Huang Z J, Laakso M J et al. Quantitative assessment of structural and compositional colors induced by femtosecond laser: a case study on 301LN stainless steel surface[J]. Applied Surface Science, 484, 655-662(2019).

[23] Yao J W, Zhang C Y, Liu H Y et al. Selective appearance of several laser-induced periodic surface structure patterns on a metal surface using structural colors produced by femtosecond laser pulses[J]. Applied Surface Science, 258, 7625-7632(2012).

[24] Ha B H, Ahn S, Bae H S et al. Fast and direct engraving of iridescent lettering on original product surface using laser interference to prevent counterfeiting[J]. Optics and Lasers in Engineering, 107, 214-220(2018).

[25] Teutoburg-Weiss S, Soldera M, Bouchard F et al. Structural colors with embedded anti-counterfeit features fabricated by laser-based methods[J]. Optics & Laser Technology, 151, 108012(2022).

[26] Xie J, Wang F, Jiang L et al. Periodic surface structures induced by femtosecond laser single pulse and pulse trains on metals[J]. Laser Physics, 25, 056103(2015).

[27] Li J W, Li G Q, Hu Y L et al. Selective display of multiple patterns encoded with different oriented ripples using femtosecond laser[J]. Optics & Laser Technology, 71, 85-88(2015).

[28] Fan Y J, Li B, Lu J J et al. Study on morphology evolution of GCr15 steel by nanosecond laser ablation[J]. Chinese Journal of Lasers, 50, 2002201(2023).

Tools

Get Citation

Copy Citation Text

Di Peng, Dazheng Wang, Guowei Zhang. Rapid Preparation of Iris and Color Composite Patterns by Laser Direct Writing[J]. Chinese Journal of Lasers, 2024, 51(12): 1202203

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Laser Surface Machining

Received: Jul. 20, 2023

Accepted: Oct. 10, 2023

Published Online: Feb. 19, 2024

The Author Email: Zhang Guowei (zgw318@tust.edu.cn)

DOI:10.3788/CJL231040

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology