[1] [1] TAYLOR H F W. Cement chemistry［M］. London: Thomas Telford Publishing, 1997.

[2] [2] BAHAFID S, GHABEZLOO S, FAURE P, et al. Effect of the hydration temperature on the pore structure of cement paste: experimental investigation and micromechanical modelling［J］. Cement and Concrete Research, 2018, 111: 1-14.

[3] [3] LOTHENBACH B, WINNEFELD F, ALDER C, et al. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes［J］. Cement and Concrete Research, 2007, 37(4): 483-491.

[4] [4] GAJEWICZ-JAROMIN A M, MCDONALD P J, MULLER A C A, et al. Influence of curing temperature on cement paste microstructure measured by 1H NMR relaxometry［J］. Cement and Concrete Research, 2019, 122: 147-156.

[5] [5] GALLUCCI E, ZHANG X, SCRIVENER K L. Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)［J］. Cement and Concrete Research, 2013, 53: 185-195.

[7] [7] NIU D T, ZHANG S H, WANG Y, et al. Effect of temperature on the strength, hydration products and microstructure of shotcrete blended with supplementary cementitious materials［J］. Construction and Building Materials, 2020, 264: 120234.

[11] [11] SHIRANI S, CUESTA A, MORALES-CANTERO A, et al. Influence of curing temperature on belite cement hydration: a comparative study with Portland cement［J］. Cement and Concrete Research, 2021, 147: 106499.

[14] [14] WANG L, YANG H Q, ZHOU S H, et al. Hydration, mechanical property and C-S-H structure of early-strength low-heat cement-based materials［J］. Materials Letters, 2018, 217: 151-154.