[1] G XING, N MATHEWS, S SUN et al. Long-range balanced electron-and hole-transport lengths in organic-inorganic CH₃NH₃PbI₃. Science, 344(2013).

[2] D SHI, V ADINOLFI, R COMIN et al. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals. Science, 519(2015).

[3] N G PARK. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell. J. Phys. Chem. Lett., 2423(2013).

[4] C LIU, Y YANG, H CHEN et al. Bimolecularly passivated interface enables efficient and stable inverted perovskite solar cells. Science, 810(2023).

[5] L ZHANG, L MEI, K WANG et al. Advances in the application of perovskite materials. Nano-Micro Lett., 177(2023).

[6] H HUANG, P CUI, Y CHEN et al. 24.8%-Efficient planar perovskite solar cells via ligand-engineered TiO₂ deposition. Joule, 2186(2022).

[7] F SAHLI, J WERNER, B A KAMINO et al. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency. Nat. Mater., 820(2018).

[8] . Best research-cell efficiency chart. https://www.nrel.gov/pv/cell-efficiency.html

[9] L K ONO, S LIU, Y QI. Reducing detrimental defects for high-performance metal halide perovskite solar cells. Angew. Chem. Int. Ed., 6676(2020).

[10] B CHEN, P N RUDD, S YANG et al. Imperfections and their passivation in halide perovskite solar cells. Chem. Soc. Rev., 3842(2019).

[11] C RAN, J XU, W GAO et al. Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering. Chem. Soc. Rev., 4581(2018).

[12] Y CAI, L LIANG, P GAO. Promise of commercialization: carbon materials for low-cost perovskite solar cells. Chin. Phys. B, 018805(2018).

[13] W ZHANG, J LUO, S LIU et al. Zirconia spacer: preparation by low temperature spray-coating and application in triple-layer perovskite solar cells. J. Inorg. Mater., 213(2023).

[14] W FANG, L SHEN, H LI et al. Effect of film formation processes of NiO_x mesoporous layer on performance of perovskite solar cells with carbon electrodes. J. Inorg. Mater., 1103(2023).

[15] W Q WU, D CHEN, R A CARUSO et al. Recent progress in hybrid perovskite solar cells based on n-type materials. J. Mater. Chem. A, 10092(2017).

[16] Y ZHOU, X LI, H LIN. To be higher and stronger-metal oxide electron transport materials for perovskite solar cells. Small, 1902579(2020).

[17] Y H CHU, L W MARTIN, M B HOLCOMB et al. Electric-field control of local ferromagnetism using a magnetoelectric multiferroic. Nat. Mater., 478(2008).

[18] L BO. Investigation on photocurrent polarity of a bulk heterojunction organic photovoltaic device using a ferroelectric thin film. Acta Phys.-Chim. Sin., 217(2012).

[19] W QIN, W ALI, J WANG et al. Suppressing non-radiative recombination in metal halide perovskite solar cells by synergistic effect of ferroelasticity. Nat. Commun., 256(2023).

[20] T CHOI, S LEE, Y J CHOI et al. Switchable ferroelectric diode and photovoltaic effect in BiFeO₃. Science, 63(2009).

[21] L LOH, J BRISCOE, S DUNN. Enhanced performance with bismuth ferrite perovskite in ZnO nanorod solid state solar cells. Nanoscale, 7072(2014).

[22] X LIU, Q ZHANG, J LI et al. Increase of power conversion efficiency in dye-sensitized solar cells through ferroelectric substrate induced charge transport enhancement. Sci. Rep., 17389(2018).

[23] K FENG, X LIU, D SI et al. Ferroelectric BaTiO₃ dipole induced charge transfer enhancement in dye-sensitized solar cells. J. Power Sources, 35(2017).

[24] I KOVAČ, M MUŽEVIĆ, M V PAJTLER et al. Charge carrier dynamics across the metal oxide/BaTiO₃ interfaces toward photovoltaic applications from the theoretical perspective. Surf. Interfaces, 102974(2023).

[25] D BAO, X WU, L ZHANG et al. Preparation, electrical and optical properties of (Pb,Ca)TiO₃ thin films using a modified Sol-Gel technique. Thin Solid Films, 30(1999).

[26] H DENG, Y QIU, S YANG. General surfactant-free synthesis of MTiO₃ (M = Ba, Sr, Pb) perovskite nanostrips. J. Mater. Chem., 976(2009).