High Power Laser Science and Engineering, Volume. 6, Issue 1, 010000e2(2018)

Faraday effect measurements of holmium oxide (Ho2O3) ceramics-based magneto-optical materials

David Vojna1,4、†, Ryo Yasuhara2, Hiroaki Furuse3, Ondrej Slezak1, Simon Hutchinson1, Antonio Lucianetti1, Tomas Mocek1, and Miroslav Cech4
Author Affiliations
  • 1HiLASE Centre, Institute of Physics, Czech Academy of Sciences, Za Radnici 828, Dolni Brezany 252 41, Czech Republic
  • 2National Institute for Fusion Science, National Institutes of Natural Sciences, 322-6, Oroshi-cho, Toki, Gifu 509-5292, Japan
  • 3Kitami Institute of Technology, 165 Koen-cho, Kitami, Hokkaido, Japan
  • 4Department of Physical Electronics, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehova 7, Prague 115 19, Czech Republic
  • show less
    Figures & Tables(7)
    Simplified scheme of the experimental setup for laser measurement of the Verdet constant temperature dependence.
    An example of measured data gathered for one temperature step (at 300 K).
    Experimental results for laser measurement of the Verdet constant temperature dependence of Ho2O3 ceramics.
    Simplified scheme of the experimental setup used for measurement of the Verdet constant dispersion.
    The experimental results obtained for the Verdet constant dispersion of Ho2O3 ceramics-based magneto-optical materials.
    • Table 1. Material parameters and the fitted parameters.

      View table
      View in Article

      Table 1. Material parameters and the fitted parameters.

      Ho2O3TGG
      $L$ [mm]$0.47\pm 0.01$$4.09\pm 0.01$
      $B_{\text{eff}}$ [T]$1.20\pm 0.06$$1.19\pm 0.06$
      $G~\left[{\displaystyle \frac{\text{radK}}{\text{Tm}}}\right]$$14\,835\pm 395$$13\,558\pm 147$
      $H~\left[{\displaystyle \frac{\text{rad}}{\text{Tm}}}\right]$$-2.01\pm 2.10$$-2.01\pm 1.00$
      $T_{c}$ [K]$-16.01\pm 0.83$$-7.46\pm 0.25$
    • Table 2. Material parameters for the samples under investigation for the Verdet constant dispersion measurement.

      View table
      View in Article

      Table 2. Material parameters for the samples under investigation for the Verdet constant dispersion measurement.

      Ho2O3Tb:Ho2O3Ce:Ho2O3
      Doping levelNondoped0.2 at. %0.1 at. %
      $L$ [mm]$0.47\pm 0.01$$0.45\pm 0.01$$0.48\pm 0.01$
      $B_{\text{eff}}$ [T]$1.20\pm 0.06$$1.20\pm 0.06$$1.20\pm 0.06$
    Tools

    Get Citation

    Copy Citation Text

    David Vojna, Ryo Yasuhara, Hiroaki Furuse, Ondrej Slezak, Simon Hutchinson, Antonio Lucianetti, Tomas Mocek, Miroslav Cech. Faraday effect measurements of holmium oxide (Ho2O3) ceramics-based magneto-optical materials[J]. High Power Laser Science and Engineering, 2018, 6(1): 010000e2

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Research Articles

    Received: Oct. 9, 2017

    Accepted: Dec. 1, 2017

    Published Online: Jul. 2, 2018

    The Author Email: David Vojna (vojnadav@fzu.cz)

    DOI:10.1017/hpl.2017.37

    Topics