[2] [2] CHEN J Q, DAN H C, DING Y J, et al. New innovations in pavement materials and engineering: a review on pavement engineering research 2021［J］. Journal of Traffic and Transportation Engineering (English Edition), 2021, 8(6): 815-999.

[4] [4] DO T M, KANG G O, KIM Y S. Development of a new cementless binder for controlled low strength material (CLSM) using entirely by-products［J］. Construction and Building Materials, 2019, 206: 576-589.

[5] [5] DO T M, KIM Y S, DANG M Q. Influence of curing conditions on engineering properties of controlled low strength material made with cementless binder［J］. KSCE Journal of Civil Engineering, 2017, 21(5): 1774-1782.

[6] [6] DO T M, KANG G O, GO G H, et al. Evaluation of coal ash-based CLSM made with cementless binder as a thermal grout for borehole heat exchangers［J］. Journal of Materials in Civil Engineering, 2019, 31(6): 1-11.

[7] [7] LACHEMI M, HOSSAIN K M A, SHEHATA M, et al. Controlled low strength materials incorporating cement kiln dust from various sources［J］. Cement and Concrete Composites, 2008, 30(5): 381-392.

[10] [10] ETXEBERRIA M, AINCHIL J, PREZ M E, et al. Use of recycled fine aggregates for control low strength materials (CLSMs) production［J］. Construction and Building Materials, 2013, 44: 142-148.

[11] [11] YAN D Y S, TANG I Y, LO I M C. Development of controlled low-strength material derived from beneficial reuse of bottom ash and sediment for green construction［J］. Construction and Building Materials, 2014, 64: 201-207.

[12] [12] MNEINA A, SOLIMAN A M, AHMED A, et al. Engineering properties of controlled low-strength materials containing treated oil sand Waste［J］. Construction and Building Materials, 2018, 159: 277-285.

[13] [13] WANG L, ZOU F L, FANG X L, et al. A novel type of controlled low strength material derived from alum sludge and green materials［J］. Construction and Building Materials, 2018, 165: 792-800.

[14] [14] KUO W T, GAO Z C. Engineering properties of controlled low-strength materials containing bottom ash of municipal solid waste incinerator and water filter silt［J］. Applied Sciences, 2018, 8(8): 1377.

[15] [15] KUO W T, WANG H Y, SHU C Y, et al. Engineering properties of controlled low-strength materials containing waste oyster shells［J］. Construction and Building Materials, 2013, 46: 128-133.

[17] [17] WU H, YIN J, BAI S. Experimental investigation of utilizing industrial waste and byproduct materials in controlled low strength materials (CLSM)［J］. Advanced Materials Research, 2013, 639/640: 299-303.

[18] [18] WANG H Y. A study of the engineering properties of waste LCD glass applied to controlled low strength materials concrete［J］. Construction and Building Materials, 2009, 23(6): 2127-2131.

[19] [19] DEV K L, ROBINSON R G. Cyclic behaviour of pond ash-based controlled low strength material［C］//Geotechnical Characterization and Modelling. Singapore: Springer, 2020: 609-621.

[21] [21] KIM Y S, DO T M, KIM M J, et al. Utilization of by-product in controlled low-strength material for geothermal systems: engineering performances, environmental impact, and cost analysis［J］. Journal of Cleaner Production, 2018, 172: 909-920.

[22] [22] WU J Y, LIN YI JIAN. Use of reservoir siltation as CLSM for subgrade constructions［J］. Advanced Materials Research, 2013, 723: 535-542.

[23] [23] NAGANATHAN S, RAZAK H A, HAMID S N A. Effect of Kaolin addition on the performance of controlled low-strength material using industrial waste incineration bottom ash［J］. Waste Management & Research: the Journal for a Sustainable Circular Economy, 2010, 28(9): 848-860.

[24] [24] TAFESSE M, KIM H K. Effect of pretreatment of mine tailings on the performance of controlled low strength materials［J］. Korean Inst of Resources Recycling, 2017, 26(3): 32-38.

[26] [26] WU J Y, LIN Y J, WU J Y, et al. Experimental study of reservoir siltation as CLSM for backfill applications［C］//Geo-Frontiers Congress 2011. March 13-16, 2011, Dallas, Texas, USA. Reston, VA, USA: American Society of Civil Engineers, 2011: 1217-1226.

[27] [27] WU J Y, TSAI M. Feasibility study of a soil-based rubberized CLSM［J］. Waste Management, 2009, 29(2): 636-642.

[28] [28] MIRDAMADI A, SHAMSABADI S S, KASHI M G, et al. Geotechnical properties of controlled low strength materials (CLSM) using waste electric arc furnace dust (EAFD)［C］//GeoHunan International Conference 2009. American Society of Civil Engineers, 2009: 80-86.

[30] [30] SIVAKUMAR N, HASHIM A R, NADZRIAH A H S. Effect of quarry dust addition on the performance of controlled low-strength material made from industrial waste incineration bottom ash［J］. International Journal of Minerals, Metallurgy, and Materials, 2012, 19(6): 536-541.

[33] [33] WANG H Y, CHEN K W. A study of the engineering properties of CLSM with a new type of slag［J］. Construction and Building Materials, 2016, 102: 422-427.

[34] [34] WANG H Y, CHEN B T, WU Y W. A study of the fresh properties of controlled low-strength rubber lightweight aggregate concrete (CLSRLC)［J］. Construction and Building Materials, 2013, 41: 526-531.

[35] [35] FARRAG K. Controlled low-strength material used around buried pipelines［J］. Transportation Research Record: Journal of the Transportation Research Board, 2011, 2251(1): 157-164.

[36] [36] BOUZALAKOS S, DUDENEY A W L, CHEESEMAN C R. Controlled low-strength materials containing waste precipitates from mineral processing［J］. Minerals Engineering, 2008, 21(4): 252-263.

[38] [38] ALIZADEH V, HELWANY S, GHORBANPOOR A, et al. Design and application of controlled low strength materials as a structural fill［J］. Construction and Building Materials, 2014, 53: 425-431.

[39] [39] KIM Y S, DINH B H, DO T M, et al. Development of thermally enhanced controlled low-strength material incorporating different types of steel-making slag for ground-source heat pump system［J］. Renewable Energy, 2020, 150: 116-127.

[40] [40] HUANG L J, WANG H Y, WEI C T. Engineering properties of controlled low strength desulfurization slags (CLSDS)［J］. Construction and Building Materials, 2016, 115: 6-12.

[41] [41] SHEEN Y N, HUANG L J, LE D H. Engineering properties of controlled low-strength material made with residual soil and class F fly ash［J］. Applied Mechanics and Materials, 2014, 597: 345-348.

[42] [42] WENG T L, LIN W T, LIU Y L. Engineering properties of controlled low-strength materials containing co-fired fly ash［J］. Monatshefte Für Chemie - Chemical Monthly, 2017, 148(7): 1337-1347.

[43] [43] SINGH V K, DAS S K. Engineering properties of industrial by-products-based controlled low-strength material［C］//Problematic Soils and Geoenvironmental Concerns. Singapore: Springer, 2021: 277-294.

[44] [44] QIAN J S, HU Y Y, ZHANG J K, et al. Evaluation the performance of controlled low strength material made of excess excavated soil［J］. Journal of Cleaner Production, 2019, 214: 79-88.

[45] [45] LEE K J, KIM S K, LEE K H. Flowable backfill materials from bottom ash for underground pipeline［J］. Materials, 2014, 7(5): 3337-3352.

[46] [46] GEMPERLINE C S, DURHAM S, GEMPERLINE C S, et al. Beneficial use of recycled materials in controlled low strength materials［C］//International Conference on Pipelines and Trenchless Technology. 2012, Wuhan, China. Reston, VA: American Society of Civil Engineers, 2012: 1305-1316.

[47] [47] BYUN Y H, HAN W, TUTUMLUER E, et al. Elastic wave characterization of controlled low-strength material using embedded piezoelectric transducers［J］. Construction and Building Materials, 2016, 127: 210-219.

[48] [48] RAN J, ZHANG J, YANG M, et al. Controlled low-strength material incorporating recycled fine aggregate from urban red brick based construction waste［J］. Journal of Southeast University, 2017, 33(4): 496-501.

[49] [49] TRKEL S. Long-term compressive strength and some other properties of controlled low strength materials made with pozzolanic cement and Class C fly ash［J］. Journal of Hazardous Materials, 2006, 137(1): 261-266.

[51] [51] DO T M, DO A N, KANG G O, et al. Utilization of marine dredged soil in controlled low-strength material used as a thermal grout in geothermal systems［J］. Construction and Building Materials, 2019, 215: 613-622.

[52] [52] JANG J G, PARK S M, CHUNG S, et al. Utilization of circulating fluidized bed combustion ash in producing controlled low-strength materials with cement or sodium carbonate as activator［J］. Construction and Building Materials, 2018, 159: 642-651.

[54] [54] WU H, HUANG B S, SHU X, et al. Utilization of solid wastes/byproducts from paper mills in controlled low strength material (CLSM)［J］. Construction and Building Materials, 2016, 118: 155-163.

[55] [55] LIM S, LEE W, CHOO H, et al. Utilization of high carbon fly ash and copper slag in electrically conductive controlled low strength material［J］. Construction and Building Materials, 2017, 157: 42-50.

[56] [56] KUBISSA W, JASKULSKI R, SZPETULSKI J, et al. Utilization of fine recycled aggregate and the calcareous fly ash in CLSM manufacturing［J］. Advanced Materials Research, 2014, 1054: 199-204.

[61] [61] RAGHAVENDRA T, UDAYASHANKAR B C. Engineering properties of controlled low strength materials using flyash and waste gypsum wall boards［J］. Construction and Building Materials, 2015, 101: 548-557.

[65] [65] LE D H, NGUYEN K H. An assessment of eco-friendly controlled low-strength material［J］. Procedia Engineering, 2016, 142: 260-267.

[66] [66] SHEEN Y N, ZHANG L H, LE D H. Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cement［J］. Construction and Building Materials, 2013, 48: 822-829.

[67] [67] SHEEN Y N, HUANG L J, WANG H Y, et al. Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag［J］. Construction and Building Materials, 2014, 54: 1-9.

[68] [68] LEE N K, KIM H K, PARK I S, et al. Alkali-activated, cementless, controlled low-strength materials (CLSM) utilizing industrial by-products［J］. Construction and Building Materials, 2013, 49: 738-746.

[69] [69] HWANG C L, HUYNH T P. Characteristics of alkali-activated controlled low-strength material derived from red mud-slag blends［J］. Key Engineering Materials, 2017, 753: 343-348.

[70] [70] PARK S M, LEE N K, LEE H K. Circulating fluidized bed combustion ash as controlled low-strength material (CLSM) by alkaline activation［J］. Construction and Building Materials, 2017, 156: 728-738.

[72] [72] HWANG C L, CHIANG C H, HUYNH T P, et al. Evaluation of fresh properties of controlled low-strength material produced from water treatment sludge-fly ash-slag mixture using alkaline activation［J］. Applied Mechanics and Materials, 2018, 878: 28-34.

[73] [73] KIM Y S, DO T M, KIM H K, et al. Utilization of excavated soil in coal ash-based controlled low strength material (CLSM)［J］. Construction and Building Materials, 2016, 124: 598-605.

[74] [74] KATZ A, KOVLER K. Utilization of industrial by-products for the production of controlled low strength materials (CLSM)［J］. Waste Management, 2004, 24(5): 501-512.

[75] [75] KALIYAVARADHAN S K, LING T, GUO M Z, et al. Waste resources recycling in controlled low-strength material (CLSM): a critical review on plastic properties［J］. Journal of Environmental Management, 2019

[76] [76] HORIGUCHI T, FUJITA R, SHIMURA K. Applicability of controlled low-strength materials with incinerated sewage sludge ash and crushed-stone powder［J］. Journal of Materials in Civil Engineering, 2011, 23(6): 767-771.

[77] [77] RAZAK H A, NAGANATHAN S, HAMID S N A. Performance appraisal of industrial waste incineration bottom ash as controlled low-strength material［J］. Journal of Hazardous Materials, 2009, 172(2/3): 862-867.

[80] [80] GABR M A, BOWDERS J J. Controlled low-strength material using fly ash and AMD sludge［J］. Journal of Hazardous Materials, 2000, 76(2/3): 251-263.