[1] LAKHDAR Y, TUCK C, BINNER J et al. Additive manufacturing of advanced ceramic materials[J]. Progress in Materials Science, 116, 100736(2021).

[2] LI X B, ZHONG H, ZHANG J X et al. Powder characteristics on the rheological performance of resin-based zirconia suspension for stereolithography[J]. Journal of Inorganic Materials, 35, 231-235(2020).

[3] HE C, MA C, LI X L et al. Continuous fast 3D printing of SiOC ceramic components[J]. Additive Manufacturing, 46, 102111(2021).

[4] YANG L L, ZENG X J, DITTA A et al. Preliminary 3D printing of large inclined-shaped alumina ceramic parts by direct ink writing[J]. Journal of Advanced Ceramics, 9, 312-319(2020).

[5] HU X A, ZHAO G L, LIU F C et al. Microstructure and mechanical behavior of Inconel 625 alloy processed by selective laser melting at high temperature up to 1000 ℃[J]. Rare Metal, 39, 1181-1189(2020).

[6] CHEN F, ZHU H, WU J M et al. Preparation and biological evaluation of ZrO₂ all-ceramic teeth by DLP technology[J]. Ceramics International, 46, 11268-11274(2020).

[7] ZHANG K Q, XIE C, WANG G et al. High solid loading, low viscosity photosensitive Al₂O₃ slurry for stereolithography based additive manufacturing[J]. Ceramics International, 45, 203-208(2019).

[8] CHEN Z W, LI Z Y, LI J J et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 39, 661-687(2019).

[9] HE R J, ZHOU, N P, ZHANG K Q et al. Progress and challenges towards additive manufacturing of SiC ceramic[J]. Journal of Advanced Ceramics, 10, 637-674(2021).

[10] SU B, DHARA S, WANG L. Green ceramic machining: a top- down approach for the rapid fabrication of complex-shaped ceramics[J]. Journal of the European Ceramic Society, 28, 2109-2115(2008).

[11] LI H, LIU Y S, LIU Y S et al. Microstructure and mechanical properties of 3D printed ceramics with different vinyl acetate contents[J]. Rare Metals, 40, 3241-3250(2021).

[12] DING G J, HE R J, ZHANG K Q et al. Dispersion and stability of SiC ceramic slurry for stereolithography[J]. Ceramics International, 46, 4720-4729(2020).

[13] LI K H, ZHAO Z. The effect of the surfactants on the formulation of UV-curable SLA alumina suspension[J]. Ceramics International, 43, 4761-4767(2017).

[14] NIE J B, LI M S, LIU W W et al. The role of plasticizer in optimizing the rheological behavior of ceramic pastes intended for stereolithography-based additive manufacturing[J]. Journal of the European Ceramic Society, 41, 646-654(2021).

[15] AZARMI F, ALI A. Microstructural evolution during fabrication of alumina via laser stereolithography technique[J]. Ceramics International, 45, 271-278(2019).

[16] NDINISA S S, WHITEFIELD D J, SIGALAS I. Fabrication of complex shaped alumina parts by gelcasting on 3D printed moulds[J]. Ceramics International, 46, 3177-3182(2020).

[17] WEI J J, LI J L, SONG X X et al. Effects of solid loading on the rheological behaviors and mechanical properties of injection- molded alumina ceramics[J]. Journal of Alloys and Compounds, 768, 503-509(2018).

[18] ZHANG K Q, HE R J, DING G J et al. Digital light processing of 3Y-TZP strengthened ZrO₂ ceramics[J]. Material Science Engineering A, 774, 138768(2020).

[19] [J].

[20] HERSCHEL W H, BULKLEY R. Konsistenzmessungen von gummi-benzollosungen[J]. Kolloid Zeitschrift, 39, 291-300(1926).

[21] LEWIS J A. Colloidal processing of ceramics[J]. Journal of the American Ceramic Society, 83, 2341-2359(2000).

[22] LIU D M. Particle packing and rheological property of highly- concentrated ceramic suspensions: φ_m determination and viscosity prediction[J]. Journal of Materials Science, 35, 5503-5507(2000).

[23] CHARITIER T, CHAPUT C, DOREAU F et al. Stereolithography of structural complex ceramic parts[J]. Journal of Materials Science, 37, 3141-3147(2002).

[24] ABOULIATIM Y, CHARTIER T, ABELARD P et al. Optical characterization of stereolithography alumina suspensions using the Kubelka-Munk model[J]. Journal of the European Ceramic Society, 29, 919-924(2009).

[25] GRIFFITH M L, HALLORAN J W. Freeform fabrication of ceramics via stereolithography[J]. Journal of the American Ceramic Society, 79, 2601-2608(1996).

[26] DIENER S, FRANCHIN G, ACHILLES N et al. X-ray microtomography investigations on the residual pore structure in silicon nitride bars manufactured by Direct Ink Writing using different printing patterns[J]. Open Ceramic, 5, 100042(2021).

[27] ZHANG K Q, MENG Q Y, CAI N J et al. Effects of solid loading on stereolithographic additive manufactured ZrO₂ ceramic: a quantitative defect study by X-ray computed tomography[J]. Ceramics International, 47, 24353-24359(2021).

[28] ZHANG K Q, HE R J, DING G J et al. Effects of fine grains and sintering additives on stereolithography additive manufactured Al₂O₃ ceramic[J]. Ceramics International, 47, 2303-2310(2021).