Laser & Optoelectronics Progress, Volume. 54, Issue 9, 91601(2017)
Influence of Annealing Temperature on Properties of Cu2ZnSnS4 Thin Films Prepared by Step Sputtering
[1] [1] Ito K, Nakazawa T. Electrical and optical properties of stannite-type quaternary semiconductor thin films[J]. Japanese Journal of Applied Physics, 1988, 27(11): 2094-2097.
[2] [2] Katagiri H, Sasaguchi N, Hando S, et al. Preparation and evaluation of Cu2ZnSnS4 thin films by sulfurization of E-B evaporated precursors[J]. Solar Energy Materials and Solar Cells, 1997, 49(1/2/3/4): 407-414.
[4] [4] Shockley W, Queisser H J. Detailed balance limit of efficiency of p-n junction solar cells[J]. Journal of Applied Physics, 1961, 32(3): 510-519.
[5] [5] Barkhouse D, Gunawan O, Gokmen T, et al. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell[J]. Progress in Photovoltaics, 2012, 20(1): 6-11.
[6] [6] Ma Xinjian, Lin Tao, Feng Shuaichen. Analysis of mono-crystalline silicon solar cells preventing PID coating process[J]. Laser & Optoelectronics Progress, 2015, 52(4): 041601.
[7] [7] Katagiri H, Jimbo K, Yamada S, et al. Enhanced conversion efficiencies of Cu2ZnSnS4-based thin film solar cells by using preferential etching technique[J]. Applied Physics Express, 2008, 1(4): 041201.
[8] [8] Moriya K, Tanaka K, Uchiki H. Fabrication of Cu2ZnSnS4 thin-film solar cell prepared by pulsed laser deposition[J]. Japanese Journal of Applied Physics, 2007, 46(9): 5780-5781.
[9] [9] Tian Hao, Liu Zhengtang, Feng Liping, et al. Influence of annealing temperatures on optical properties of HfSixOy thin films prepared by magnetron sputtering[J]. Acta Optica Sinica, 2012, 32(6): 0631005.
[10] [10] Brammertz G, Buffiere M, Oueslati S, et al. Characterization of defects in 9.7% efficient Cu2ZnSnSe4-CdS-ZnO solar cells[J]. Applied Physics Letters, 2013, 103(16): 163904.
[11] [11] Li J J, Wang H X, Luo M, et al. 10% efficiency Cu2ZnSn (S, Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width[J]. Solar Energy Materials and Solar Cells, 2016, 149: 242-249.
[12] [12] Jo Y H, Mohanty B C, Yeon D H, et al. Single elementary target-sputtered Cu2ZnSnSe4 thin film solar cells[J]. Solar Energy Materials and Solar Cells, 2015, 132: 136-141.
[13] [13] Seol J S, Lee S Y, Lee J C, et al. Electrical and optical properties of Cu2ZnSnS4 thin films prepared by rf magnetron sputtering process[J]. Solar Energy Materials and Solar Cells, 2003, 75(1/2): 155-162.
[14] [14] Kamoun N, Bouzouita H, Rezig B. Fabrication andcharacterization of Cu2ZnSnS4 thin films deposited by spray pyrolysis technique[J]. Thin Solid Films, 2007, 515(15): 5949-5952.
[15] [15] Hergert F, Hock R. Predicted formation reactions for the solid-state syntheses of the semiconductor materials Cu2SnX3 and Cu2ZnSnX4 (X=S, Se) starting from binary chalcogenides[J]. Thin Solid Films, 2007, 515(15): 5953-5956.
[16] [16] Weber A, Mainz R, Unold T, et al. In-situ XRD on formation reactions of Cu2ZnSnS4 thin films[J]. Physica Status Solidi, 2009, 6(5): 1245-1248.
[17] [17] Araki H, Kubo Y, Mikaduki A, et al. Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors[J]. Solar Energy Materials & Solar Cells, 2009, 93(6/7): 996-999.
[18] [18] Momose N, Htay M T, Yudasaka T, et al. Cu2ZnSnS4 thin film solar cells utilizing sulfurization of metallic precursor prepared by simultaneous sputtering of metal targets[J]. Japanese Journal of Applied Physics, 2011, 50(1): 01BG09.
[19] [19] Tanaka T, Kawasaki D, Nishio M, et al. Fabrication of Cu2ZnSnS4 thin films by co-evaporation[J]. Physica Status Solidi, 2006, 3(8): 2844-2847.
[20] [20] Fernandes P A, Salome P M P, da Cunha A F. Study of polycrystalline Cu2ZnSnS4 films by Raman scattering[J]. Journal of Alloys and Compounds, 2011, 509(28): 7600-7606.
[21] [21] Scragg J J. Copper zinc tin sulfide thin films for photovoltaics: Synthesis and characterisation by electrochemical methods[M]. Berlin: Springer, 2011: 97-108.
[22] [22] Tanaka K, Moritake N, Uchiki H. Preparation of Cu2ZnSnS4 thin films by sulfurizing sol-gel deposited precursors[J]. Solar Energy Materials and Solar Cells, 2007, 91(13): 1199-1201.
Get Citation
Copy Citation Text
Zhao Qichen, Hao Ruiting, Liu Sijia, Yang Min, Lu Yilei, Liu Xinxing, Chang Faran. Influence of Annealing Temperature on Properties of Cu2ZnSnS4 Thin Films Prepared by Step Sputtering[J]. Laser & Optoelectronics Progress, 2017, 54(9): 91601
Category: Materials
Received: Apr. 10, 2017
Accepted: --
Published Online: Sep. 6, 2017
The Author Email: Qichen Zhao (1922137645@qq.com)