[1] [1] JOHNSTON R D, CHIPMAN R D, KNAPP W J. Prestressed ceramics as a structural material[J]. J Am Ceram Soc, 1953, 36(4): 121–126.

[2] [2] GREEN D J, TANDON R, SGLAVO V M. Crack arrest and multiple cracking in glass through the use of designed residual stress profiles[J]. Science, 1999, 283(5406): 1295–1297.

[3] [3] WONDRACZEK L, MAURO J C, ECKERT J, et al. Towards ultrastrong glasses[J]. Adv Mater, 2011, 23(39): 4578–4586.

[4] [4] INSLEY R H, BARCZAK V J. Thermal conditioning of polycrystalline alumina ceramics[J]. J Am Ceram Soc, 1964, 47(1): 1–4.

[5] [5] CHEN L M, WANG A Z, SUO X B, et al. Effect of surface heat transfer coefficient gradient on thermal shock failure of ceramic materials under rapid cooling condition[J]. Ceram Int, 2018, 44(8): 8992–8999.

[6] [6] BARBI S, MUGONI C, MONTORSI M, et al. Chemical hardening of glazed porcelain tiles[J]. J Am Ceram Soc, 2019, 102(5): 2853–2862.

[7] [7] SHAN Z J, LIU J X, SHI F, et al. A new strengthening theory for improving the fracture strength of lithium disilicate glass-ceramics by introducing Rb or Cs ions[J]. J Non Cryst Solids, 2018, 481: 479–485.

[8] [8] KRSTIC Z, KRSTIC V D. Silicon nitride: The engineering material of the future[J]. J Mater Sci, 2012, 47(2): 535–552.

[9] [9] LAUNEY M E, RITCHIE R O. On the fracture toughness of advanced materials[J]. Adv Mater, 2009, 21(20): 2103–2110.

[11] [11] GOHARDANI A S, GOHARDANI O. Ceramic engine considerations for future aerospace propulsion[J]. Aircr Eng Aerosp Technol, 2012, 84(2): 75–86.

[12] [12] GARVIE R C, HANNINK R H, PASCOE R T. Ceramic steel?[J]. Nature, 1975, 258: 703–704.

[13] [13] GRIFFITH A A. VI. The phenomena of rupture and flow in solids[J]. Phil Trans R Soc Lond A, 1921, 221(582–593): 163–198.

[14] [14] NIIHARA K. New design concept of structural ceramics[J]. J Ceram Soc Jpn, 1991, 99(1154): 974–982.

[15] [15] MESSING G L, STEVENSON A J. Materials science. Toward pore-free ceramics[J]. Science, 2008, 322(5900): 383–384.

[16] [16] ALFORD N M, BIRCHALL J D, KENDALL K. High-strength ceramics through colloidal control to remove defects[J]. Nature, 1987, 330: 51–53.

[17] [17] HAN Y, LI S, ZHU T B, et al. An oscillatory pressure sintering of zirconia powder: Densification trajectories and mechanical properties[J]. J Am Ceram Soc, 2018, 101(5): 1824–1829.

[18] [18] HUANG Y H, JIANG D L, ZHANG X F, et al. Enhancing toughness and strength of SiC ceramics with reduced graphene oxide by HP sintering[J]. J Eur Ceram Soc, 2018, 38(13): 4329–4337.

[19] [19] ZHAN G D, KUNTZ J D, WAN J L, et al. Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites[J]. Nat Mater, 2003, 2(1): 38–42.

[20] [20] PADTURE N P. Multifunctional composites of ceramics and single-walled carbon nanotubes[J]. Adv Mater, 2009, 21(17): 1767–1770.

[21] [21] YANG W, ARAKI H, TANG C, et al. Single-crystal SiC nanowires with a thin carbon coating for stronger and tougher ceramic composites[J]. Adv Mater, 2005, 17(12): 1519–1523.

[22] [22] KARIHALOO B L. Contribution of t→m phase transformation to the toughening of ZTA[J]. J Am Ceram Soc, 1991, 74(7): 1703–1706.

[23] [23] WANG X Z, MA Z L, SUN X, et al. Effects of ZrO2 and Y2O3 on physical and mechanical properties of ceramic bond and ceramic CBN composites[J]. Int J Refract Met Hard Mater, 2018, 75: 18–24.

[25] [25] NARAYANASWAMY O S. Stress and structural relaxation in tempering glass[J]. J Am Ceram Soc, 1978, 61(3/4): 146–152.

[26] [26] CHAUDHRI M M, CHEN L Y. The catastrophic failure of thermally tempered glass caused by small-particle impact[J]. Nature, 1986, 320: 48–50.

[27] [27] BUESSEM W R, GRUVER R M. Computation of residual stresses in quenched Al2O3[J]. J Am Ceram Soc, 1972, 55(2): 101–104.

[28] [28] BAO Y W, KUANG F H, SUN Y, et al. A simple way to make pre-stressed ceramics with high strength[J]. J Materiomics, 2019, 5(4): 657–662.

[31] [31] PEI Q, XIANG Y H, HU S C, et al. Design analysis and test verification of double-layer gradient coating reinforced concrete flexural strength[J]. J Nanomater, 2022, 2022(1): 6814947.

[33] [33] RICHERSON D W, LEE W E. Modern Ceramic Engineering: Properties, Processing, and Use in Design[M]. Boca Raton: CRC Press, 2018.

[34] [34] LI H Y, HAO H J, TIAN Y, et al. Temperature dependence of flexural strength and residual stress of Al2O3 reinforced by kyanite coating[J]. Ceram Int, 2022, 48(19): 28745–28750.

[37] [37] LI H Y, HAO H J, TIAN Y, et al. Effects of residual stresses on strength and crack resistance in ZrO2 ceramics with alumina coating[J]. J Inorg Mater, 2022, 37(4): 467.

[38] [38] JIA Z J, FU S, LI H Y, et al. Enhanced fracture strength and toughness of zirconia by coating the pre-stressed mullite zirconia[J]. J Ceram Sci Technol, 2024, 15(1): 21–28.

[39] [39] BELMONTE M. Advanced ceramic materials for high temperature applications[J]. Adv Eng Mater, 2006, 8(8): 693–703.

[40] [40] BALZER B, HAGEMEISTER M, KOCHER P, et al. Mechanical strength and microstructure of zinc oxide varistor ceramics[J]. J Am Ceram Soc, 2004, 87(10): 1932–1938.

[41] [41] SCHOLZ H, VETTER J, HERBORN R, et al. Oxide ceramic fibers via dry spinning process—From lab to fab[J]. Int J Appl Ceram Technol, 2020, 17(4): 1636–1645.

[42] [42] DENG Z Y, LIU Y F, TANAKA Y, et al. Modification of Al particle surfaces by -Al2O3 and its effect on the corrosion behavior of Al[J]. J Am Ceram Soc, 2005, 88(4): 977–979.

[43] [43] PETROVA E V, DRESVYANNIKOV A F, AHMADI DARYAKENARI M, et al. Physicochemical properties of precursors of Al2O3–ZrO2 oxide ceramics prepared by electrochemical method[J]. Russ J Phys Chem A, 2016, 90(5): 1021–1026.

[44] [44] FU S, JIA Z J, DING W, et al. Synthesis and characterization of a high-strength alumina ceramic reinforced by AlN-Al2O3 coating[J]. J Mater Sci, 2024, 59(31): 14235–14244.

[45] [45] YIM W M, PAFF R J. Thermal expansion of AlN, sapphire, and silicon[J]. J Appl Phys, 1974, 45(3): 1456–1457.

[48] [48] XU W, LI K, LI Y M, et al. Surface strengthening of building tiles by ion exchange with adding molten salt of KOH[J]. Int J Appl Ceram Technol, 2022, 19(3): 1490–1497.

[49] [49] SUN Y, WU T Y, BAO Y W, et al. Preparation and strengthening mechanism of prestressed ceramic tile components[J]. Int J Appl Ceram Technol, 2022, 19(1): 604–611.

[51] [51] ZHANG X N, LI Y M, SUN Y, et al. Improving the flexural strength of porcelain by residual stress in anorthite coating[J]. Int J Appl Ceram Technol, 2022, 19(5): 2566–2573.

[53] [53] BAO Y W, SU S B, HUANG J L. An uneven strain model for analysis of residual stress and interface stress in laminate composites[J]. J Compos Mater, 2002, 36(14): 1769–1778.

[54] [54] LAWN B R. Indentation of ceramics with spheres: A century after hertz[J]. J Am Ceram Soc, 1998, 81(8): 1977–1994.

[55] [55] LI H Y, WU H L, HAN Y, et al. Enhanced high temperature properties of ZTA prestressed ceramics reinforced by cordierite coating[J]. Int J Appl Ceram Technol, 2024, 21(2): 855–860.

[56] [56] WU H L, LI H Y, CAO D K, et al. The effects of compressive residual stress on properties of kyanite-coated zirconia toughened alumina ceramics[J]. Materials, 2023, 16(17): 6071.

[57] [57] GREIL P. Near net shape manufacturing of ceramics[J]. Mater Chem Phys, 1999, 61(1): 64–68.

[58] [58] LV L, LU Y J, ZHANG X Y, et al. Preparation of low-shrinkage and high-performance alumina ceramics via incorporation of pre-sintered alumina powder based on Isobam gelcasting[J]. Ceram Int, 2019, 45(9): 11654–11659.

[60] [60] LI H Y, ZHANG X Y, LIU X G, et al. A way to control sintering deformation of Al2O3 components by gradient shrinkage[J]. Ceram Int, 2024, 50(21): 44716–44721.