[1] [1] Nicolae Lobontiu, Jeffrey S N Paine, Edward O′Malley. Parabolic and hyperbolic flexure hinges: flexibility, motion precision and stress characterization based on compliance closed-form equations [J]. Precision Engineering, 2002, 26: 183-192.

[2] [2] Xu Hong, Guan Yingjun. Structural design of large aperture SiC mirror subassembly[J]. Infrared and Laser Engineering, 2014, 43(1): 83-88. (in Chinese)

[3] [3] Wang Rongqi, Zhou Xiaoqin, Zhu Zhiwei, et al. Development of a novel type of hybrid non-symmetric flexure hinges[J]. Rev Sci Instrum, 2015, 86(8): 289-298.

[4] [4] Liu Fuhe, Cheng Zhifeng. Design and analysis of supporting structure for rectangular mirror[J]. Infrared and Laser Engineering, 2015, 44(5): 1512-1517. (in Chinese)

[5] [5] Shi R C, Dong W, Du Z J. Design methodology and performance analysis of application-oriented flexure hinges [J]. Rev Sci Instrum, 2013, 84: 1-4.

[6] [6] Yong Yuenkuan, Lu Tienfu, Handley D C. Review of circular flexure hinge design equations and derivation of empirical formulation[J]. Precision Engineering, 2008, 32(2): 63-70.

[7] [7] Lu Yafei. Research on fast steering mirror system [D]. Changsha: National University of Defense Technology, 2009. (in Chinese)

[8] [8] Lu Qian, Huang Weiqing. Optimization design of deep-notch elliptical flexure hinges[J]. Optics and Precision Engineering, 2015, 23(1): 207-214. (in Chinese)

[9] [9] Ren Ning, Wang Changlu, Ou Kailiang, et al. Research on rigidity of the novel hyperbolic-rectangle flexure hinges[J]. Journal of Mechanical Strength, 2012, 34(5): 781-785. (in Chinese)

[10] [10] Lin Rongzhou, Zhang Xianmin, Sergej Fatikow. Hybrid flexure hinges [J]. Rev Sci Instrum, 2013, 84(84): 085004.

[11] [11] Zhou Ziyun, Gao Yunguo, Shao Shuai, et al. Design of fast steering mirror using flexible hinge [J]. Optics and Precision Engineering, 2014, 22(6): 1547-1554. (in Chinese)

[12] [12] Wu Yingfei, Zhou Zhaoying. Dedign of flexure hinge [J]. Engineering Mechanics, 2002, 19(6): 136-140. (in Chinese)

[13] [13] Stuar T Smith, Vivek G Badami, Jami S Dale. Elliptical flexure hinges[J]. Rev Sci Instrum, 1997, 8(3): 1474-1482.

[14] [14] Zhang Zhijie, Yuan Yibao. Research on half hyperbolic flexure hinge based on closed-form compliance equations [J]. Chinese Journal of Scientific Instrument, 2007, 28(6): 1055-1059. (in Chinese)

[15] [15] Yang Chunhui. Analysis of the influence of straight beam flexible hinge structure parameter on the stiffness[J]. Journal of Mechanical Transmission, 2010, 34(9): 17-19. (in Chinese)

[16] [16] Li Haixing, Ding Yalin. Mirror support structure with two mutually perpendicular single-axis circular flexure hinges[J]. Infrared and Laser Engineering, 2013, 42(7): 1765-1769. (in Chinese)

[17] [17] Zhang Zhijie, Yuan Yibao. Compliances calculation and analysis of typical flexure hinge [J]. Engineering Mechanics, 2008, 25(4): 106-110. (in Chinese)