[1] [1] WANG F G, AN Q CH. Evaluation of mirror surface figures for TMT based on slope Rms ［J］. Opt. Precision Eng., 2014, 22(5): 1171-1175.(in Chinese)

[2] [2] LIU J, DONG D Y, XIN H W, et al.. Temperature adaptation of lerge aperture mirror assembly ［J］. Opt. Precision Eng., 2013, 21(12): 3169-3175.(in Chinese)

[3] [3] LI Z X, JIN G, ZHANG L. Overview and outlook of monolithic primary mirror of spaceborne telescope with 3.5 m aperture ［J］. Chinese Optics, 2014, 7(4): 532-541.(in Chinese)

[4] [4] ZHANG L M, ZHANG B, YANG F. Design and test of force actuator in active optical system ［J］. Opt. Precision Eng., 2012, 20(1): 38-44. (in Chinese)

[5] [5] BI Y, ZHAI J, WU J H, et al.. One method for mirror surface figure treatment in optical instrument ［J］. Optical Technique, 2009, 35(1):10-17. (in chinese)

[6] [6] WANG D, YANG H B, CHEN C Z. Computer simulation of the optical surface ［J］. Computer Simulation, 2007, 24(2):298-301.(in chinese)

[7] [7] ROSS Z. Specification of optical surface accuracy using the structure function ［J］. Proc. SPIE, 2011, 8083: 808310-1~808310-10.

[8] [8] LIN X D, LIU X Y, WANG J L, et al.. Performance of correction capability of 137-element deformable mirror ［J］. Opt. Precision Eng., 2013, 21(2):267-273.(in Chinese)

[9] [9] ZHANG J X. Overview of structure of technologies of large aperture ground based telescope ［J］. Chinese Optics, 2012, 5(4): 327-336.(in chinese)

[10] [10] ANASTACIA M H, JAMES H B. Structure function analysis of mirror fabrication and support errors ［J］.Proc.SPIE, 2007, 6671: 66710A-1-10.

[11] [11] ANASTACIA M H, JAMES H B. Structure function analysis of mirror fabrication and support errors ［J］. SPIE, 2007, 6671: 66710A-1-10.

[12] [12] ERKIN SIDICK. Power spectral density specification and analysis of large optical surfaces ［J］. SPIE, 2009, 7390: 73900L-1-10.