[1] [1] YU Y M. Dynamics and Simulation Analysis of Micro Displacement Mechanism Based on Piezoelectric Actuator ［M］. Harbin: Harbin Institute of Technology Press, 2015: 30-45. (in Chinese)

[2] [2] ROP I, HUBBEL P I. Nonlinear micro-dynamic behavior of a ball-screw driven precision slide system ［J］. Precision Engineering, 1992, 14(4): 229-236.

[3] [3] STEINMETZC R. Sub-micron position measurement and control on precision machine tools with laser interferometry ［J］. Precision Engineering, 1990, 12(1): 12-24.

[4] [4] TAKAFUJIK, NAKASHIMA K. Stiffness of a ball screw with consideration of deformation of the screw, nut and screw thread: preloaded double nut ［J］. JSME International Journal, 1990, 33(4): 620-626.

[5] [5] OTSUKAJ, IIDA N, KAWASE Y, et al.. Ultra-precision positioning using lead screw drive (3rd Report): nanometer accuracy positioning and settling time reduction ［J］. Precision Engineering, 1993, 59(10): 1655-1661.

[6] [6] LI H L, WANG Y, HUANG W Q, et al.. A double-foot driving linear piezoelectric motor ［J］. China Mechanical Engineering, 2014, 25(20): 2719-2723. (in Chinese)

[7] [7] SU ZH, HUANG W Q, WANG Y, et al.. A three-phase driving alternate stepping piezoelectric linear motor ［J］. Proceedings of the CSEE, 2016, 36(9): 2538-2544. (in Chinese)

[8] [8] HUANG W Q, MENG Y M. Design of a new type of piezoelectric linear motor based on non-resonant vibration ［J］. China Mechanical Engineering, 2009, 20(14): 1717-1721. (in Chinese)

[9] [9] WANG Y, PAN S, HUANG W Q, et al.. Linear piezoelectric motor with triangular displacement transformer ［J］. Opt. Precision Eng., 2016, 24(8): 1973-1979. (in Chinese)

[10] [10] LI Y L, HUANG W Q. Research on a linear piezoelectric motor working in low frequency with unlimit travel range ［J］. Piezoelectrics & Acoustooptics, 2009, 31(4): 507-509. (in Chinese)

[11] [11] HUANG W Q, TAO J, SUN M X, et al.. Modeling and experiment of precision rotary positioner with large stroke driven by non-resonant piezoelectric motor ［J］. Opt. Precision Eng., 2016, 24(11): 2712-2720. (in Chinese)

[12] [12] ZHANG J L, CHEN W Y, KE X R, et al.. Design and simulation of a kind of micro-displacement amplification mechanism ［J］. Journal of Machine Design, 2009, 26(12): 9-12. (in Chinese)

[13] [13] XU J J, CHEN X F, WANG Y, et al.. A piezoelectric linear motor based on combined amplification structure ［J］. Piezoelectrics & Acoustooptics, 2013, 35(2): 234-236, 249. (in Chinese)

[14] [14] YU J J, BI SH SH, ZONG G H. Study on the design of fully compliant motion amplification mechanisms in actuation systems for micromanipulators ［J］. Acta Aeronautica et Astronautica Sinica, 2004, 25(1): 74-78. (in Chinese)

[15] [15] ZHAO H ZH, BI SH SH, YU J J. Modeling and analysis of triangle flexible hinge ［J］. Journal of Mechanical Engineering, 2009, 45(8): 1-5. (in Chinese)

[16] [16] LU Q, HUANG W Q, SUN M X. Optimization design of amplification mechanism for level flexure hinge based on compliance ratio ［J］. Opt. Precision Eng., 2016, 24(11): 102-111. (in Chinese)

[17] [17] LU Q, HUANU W Q, WAND Y, et al.. Optimization design of deep-notch elliptical flexure hinges ［J］. Opt. Precision Eng., 2015, 23(1): 206-215. (in Chinese)

[18] [18] ZUO Y J. Research on Optimal Design of Clamping Mechanism for an Injection Machine Using Orthogonal Design Method ［D］. Guangzhou: Guangdong University of Technology, 2012. (in Chinese)