Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 3, 1058(2024)
Effect of Silane Coupling Agent on Flow and 3D Printing Performance of Alumina Ceramic Pastes
[1] [1] YU Y, ZOU B, WANG X F, et al. Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing[J]. Ceramics International, 2022, 48(17): 24560-24570.
[2] [2] WU H H, LI D C, TANG Y P, et al. Gelcasting of alumina based ceramic cores containing yttria for single crystal and directional solidification blades[J]. Advances in Applied Ceramics, 2009, 108(7): 406-411.
[3] [3] KIM E H, PARK H Y, LEE C L, et al. Single crystal casting of gas turbine blades using superior ceramic core[J]. Journal of Materials Research and Technology, 2020, 9(3): 3348-3356.
[4] [4] LIANG J J, LIN Q H, ZHANG X, et al. Effects of alumina on cristobalite crystallization and properties of silica-based ceramic cores[J]. Journal of Materials Science & Technology, 2017, 33(2): 204-209.
[5] [5] LI Q L, CHEN T C, LIANG J J, et al. Manufacturing of ceramic cores: from hot injection to 3D printing[J]. Journal of Materials Science & Technology, 2023, 134: 95-105.
[6] [6] CHEN Z W, LI Z Y, LI J J, et al. 3D printing of ceramics: a review[J]. Journal of the European Ceramic Society, 2019, 39(4): 661-687.
[7] [7] LICCIULLI A, ESPOSITO C C, GRECO A, et al. Laser stereolithography of ZrO2 toughened Al2O3[J]. Journal of the European Ceramic Society, 2005, 25(9): 1581-1589.
[8] [8] SUN C, ZHANG X. The influences of the material properties on ceramic micro-stereolithography[J]. Sensors and Actuators A: Physical, 2002, 101(3): 364-370.
[9] [9] HE L, SONG X. Supportability of a high-yield-stress slurry in a new stereolithography-based ceramic fabrication process[J]. JOM, 2018, 70(3): 407-412.
[10] [10] ZHANG S, SHA N, ZHAO Z. Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions[J]. Journal of the European Ceramic Society, 2017, 37(4): 1607-1616.
[11] [11] ALLEN B G, HALLORAN J W. Stereolithography of ceramic suspensions[J]. Rapid Prototyping Journal, 1997, 3(2): 61-65.
[12] [12] BRADY G A, HALLORAN J W. Differential photo-calorimetry of photopolymerizable ceramic suspensions[J]. Journal of Materials Science, 1998, 33(18): 4551-4560.
[13] [13] WU K C, HALLORAN J W. Photopolymerization monitoring of ceramic stereolithography resins by FTIR methods[J]. Journal of Materials Science, 2005, 40(1): 71-76.
[14] [14] GOSWAMI A, ANKIT K, BALASHANMUGAM N, et al. Optimization of rheological properties of photopolymerizable alumina suspensions for ceramic microstereolithography[J]. Ceramics International, 2014, 40(2): 3655-3665.
[15] [15] LI H, LIU Y S, LIU Y S, et al. 3D printed ceramic slurries with improved solid content through optimization of alumina powder and coupling agent[J]. Journal of Manufacturing Processes, 2021, 64: 1206-1213.
[16] [16] LI K H, ZHAO Z. The effect of the surfactants on the formulation of UV-curable SLA alumina suspension[J]. Ceramics International, 2017, 43(6): 4761-4767.
[17] [17] QI H, WEN D H, YUAN Q L, et al. Numerical investigation on particle impact erosion in ultrasonic-assisted abrasive slurry jet micro-machining of glasses[J]. Powder Technology, 2017, 314: 627-634.
[18] [18] CHEN H B, ZHENG J W, QIAO L, et al. Surface modification of NdFe12Nx magnetic powder using silane coupling agent KH550[J]. Advanced Powder Technology, 2015, 26(2): 618-621.
[19] [19] ADAKE C V, BHARGAVA P, GANDHI P. Effect of surfactant on dispersion of alumina in photopolymerizable monomers and their UV curing behavior for microstereolithography[J]. Ceramics International, 2015, 41(4): 5301-5308.
[20] [20] XING H Y, ZOU B, LAI Q G, et al. Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent[J]. Powder Technology, 2018, 338: 153-161.
[21] [21] XU X H, ZHOU S X, WU J F, et al. Relationship between the adhesion properties of UV-curable alumina suspensions and the functionalities and structures of UV-curable acrylate monomers for DLP-based ceramic stereolithography[J]. Ceramics International, 2021, 47(23): 32699-32709.
[22] [22] LI Y H, LIU S Y, LU P, et al. Viscosity optimisation of photosensitive Al2O3 slurry for stereolithography based additive manufacturing[J]. Processing and Application of Ceramics, 2023, 17(1): 91-103.
[23] [23] ZHANG K Q, XIE C, WANG G, et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing[J]. Ceramics International, 2019, 45(1): 203-208.
[24] [24] BORLAF M, SERRA C A, COLOMINAS C, et al. Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology[J]. Journal of the European Ceramic Society, 2019, 39(13): 3797-3803.
[25] [25] DE CAMARGO I L, MORAIS M M, FORTULAN C A, et al. A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization[J]. Ceramics International, 2021, 47(9): 11906-11921.
[26] [26] CHENG G J, LUO J Q, QIAN J S, et al. Surface modification of nano-TiN by using silane coupling agent[J]. Materials Science-Poland, 2014, 32(2): 214-219.
[27] [27] ROY K, POTIYARAJ P. Exploring the comparative effect of silane coupling agents with different functional groups on the cure, mechanical and thermal properties of nano-alumina (Al2O3)-based natural rubber (NR) compounds[J]. Polymer Bulletin, 2019, 76(2): 883-902.
Get Citation
Copy Citation Text
MIAO Xinyu, LIU Shuangyu, LU Ping, ZHANG Fulong, Vasilieva Tatiana Mikhailovna, HUANG Chuanjin, WANG Liyan, WANG Binhua. Effect of Silane Coupling Agent on Flow and 3D Printing Performance of Alumina Ceramic Pastes[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(3): 1058
Category:
Received: Nov. 15, 2023
Accepted: --
Published Online: Aug. 2, 2024
The Author Email: Shuangyu LIU (liushuangyu@ycit.edu.cn)
CSTR:32186.14.