[1] [1] FAN B, WANG Y. Research on truss structure of foreign remote-sensing cameras with long focal length and high resolution ［J］. Spacecraft Recovering and Remote Sensing, 2008, 29(2): 35-41.(in Chinese)

[2] [2] LI W, LIU H W. Structure stability of precision component made of carbon fiber composite in space optical remote sensor ［J］. Opt. Precision Eng., 2008, 16(11): 2173-2179. (in Chinese)

[3] [3] SUN J W, LV T Y, YAO L SH, et al.. Design and assembly of transmitter-telescope ［J］. Opt. Precision Eng., 2014, 22(2): 369-375. (in Chinese)

[4] [4] SEBASTIAN S, CHRISTOPH D, WOLFGANG H, et al.. Ultra precisely manufactured mirror assemblies with well defined reference structures ［J］. SPIE, 2010, 773908: 1-10.

[5] [5] XU W, PU Y J. Analysis of new generation high-performance small satellite technology based on Pleiades ［J］. Chinese Optics, 2013, 6(1): 9-19. (in Chinese)

[6] [6] KONG L, WANG D, YAO J S, et al.. Precision temperature control for supporting trusses of lightweight space cameras ［J］. Opt. Precision Eng., 2014, 22(3): 712-719. (in Chinese)

[7] [7] GUO Q F．Research on structure stability of three-mirror cassegrain space camera ［D］. Beijing: Graduate University of the Chinese Academy of Sciences, 2012. (in Chinese)

[8] [8] ANTEBI J, DUSENBERY D O, LIEPINS A A. Conversion of the MMT into a 6.5-m telescope: the optics support structure and enclosure［J］. Proc. SPIE, 1998, 513: 3352.

[9] [9] ZHANG L, YAO J S, JIA X ZH, et al.. Development of trusses made of carbon fiber composites for coaxial space remote sensors ［J］. Opt. Precision Eng., 2012, 20(9): 1967-1973. (in Chinese)

[10] [10] JIA X ZH, ZHANG L, JIN G.. Optimum design based on full stress ruler and test for truss of space camera ［J］. Chin. J. Space Sci., 2013, 33(3): 346-352. (in Chinese)

[11] [11] LI ZH L. Truss support structure design between primary mirror and secondary mirror in long focal length space camera ［J］. Laser & Infrared, 2012, 42(1): 89-93. (in Chinese)

[12] [12] PAUL R, YODER J. Opto-Mechanical Systems Design ［M］. Third edition, Boca Raton: CRC Press, Taylor & Francis Group, 2006: 706-729.

[13] [13] LIU L. Research on light-weight frame of the space optical remote sensor［D］. Beijing: Graduate University of the Chinese Academy of Sciences, 2006. (in Chinese)

[14] [14] GUO J, SHAO M D, WANG G L, et al.. Design of optical-mechanical structure made of CFC in space remote sensing camera［J］. Opt. Precision Eng., 2012, 20(3): 571-578. (in Chinese)

[15] [15] XIN H W, GUAN Y J, CHAI F M. Design of main support of off-axis space remote sensor ［J］. Opt. Precision Eng., 2012, 20(6): 1257-1264. (in Chinese)

[16] [16] AN Y, JIA X ZH, ZHANG L, et al.. Optimizing design of CFRP based main backbone with high stiffness ratio for space camera ［J］. Opt. Precision Eng., 2013, 21(2): 416-422. (in Chinese)

[17] [17] LIN Z W, LIU Y Q, LIANG Y, et al.. Application of carbon fiber reinforced composite to space optical structure ［J］. Opt. Precision Eng., 2007, 15(8): 1181-1185. (in Chinese)

[18] [18] CUI Y P, HE X, ZHANG K. Technique of cementation between the titanium alloys and carbon fibers ［J］. Optical Technique, 2012, 38(1): 125-128.(in Chinese)

[19] [19] LIU L W, LIU J, LI ZH H, et al.. Technology of cementing and assembling composite truss［J］. Aerospace Materials & Technology, 2013(4): 102-104. (in Chinese)

[20] [20] ZHANG K. HE X. ZHAO H P. Design and analysis of joints for truss structure of space camera ［J］. Infrared, 2013, 34(10): 10-15. (in Chinese)