[1] Yang Sheng, Dong Qiong, Peng Fangyu, et al. Workpiece temperature analysis and its impact on machined surface quality of ultra high strength steel in end milling[J]. Acta Aeronautica et Astronautica Sinica, 36, 1722-1732(2015).

[2] Zhang Huiping, Wang Chongxun, Du Xu. Aircraft landing gear with the development of 300 m ultra highstrength steel and research.[J]. Journal of Harbin University of Science and Technology, 16, 73-76(2011).

[3] Yang Guangfeng, Lu Mengke, Zhang Hang, et al. Corrosion behavior and mechanism of 300M ultra high strength steel in neutral salt spray environment[J]. Journal of Iron and Steel Research, 32, 406-415(2020).

[4] Zhang Zhiqiang, Yang Fan, Zhang Hongwei, et al. Microstructure and wear resistance of TiC_x reinforced Ti-based laser cladding coating with rare earth[J]. Acta Aeronautica et Astronautica Sinica, 42, 624115(2021).

[5] Tey E, Zainal Z, Lim K P, et al. Effect of addition of polyethylene glycol into trivalent chromium bath on chromium coating[J]. Solid State Phenomena, 307, 264-270(2020).

[6] Wang P N, Chang S H. Effffect of the mechanical properties and corrosion behaviors of nickel-cadmium duplex electroplated AISI 4340 steel by using various solid solution treatments[J]. Mater Trans, 59, 406(2018).

[7] Tang Zhihui, Zhang Xiaoyun, Lu Feng, et al. Study of the relati ons hip bet ween plating struct ure and hydrogen e mbrittle ment[J]. Journal of Materials Engineering, 37-42(2006).

[8] Cai Yuting. The ham of electrop lating waste water on hum an body and its central treament[J]. Journal of Agro-Environment Science, 29, 205-208(2010).

[9] Chen Yongxiong, Xu Binshi, Xu Yi, et al. The development of thermal spraying Zn-Al alloy anticorrosive coating[J]. Materials Reports, 70-73(2006).

[10] Cai Zhixiang, Zeng Xiaoyan. Develop ment and applications of laser micro cladding[J]. Chinese Journal of Optics and Applied Optics, 3, 405-414(2010).

[11] Shi Jianjun, Shi Tuo, Shi Shihong, et al. Process study and optimization of upward cladding by laser inside powder feeding[J]. Infrared and Laser Engineering, 48, 0306005(2019).

[12] Song Liping. Laser surface modification and application[J]. Physics and Engineering, 20, 42-44(2010).

[13] Qiu Xingwu. Microstructure and properties of Fe_0.5NiCoCrCuTi high entropy alloy coating prepared by laser cladding[J]. Infrared and Laser Engineering, 48, 0742004(2019).

[14] Li Yanzhou, Shi Yan. Microstructure and crossion resistance of laser deposition of Al_0.8FeCoNiCrCu, high entropy alloy on aluminum alloy[J]. Optics And Precision Engineering, 28, 914-922(2020).

[15] Liu Hongxi, Zhao Yanshuang, Zhang Xiaowei, et al. Microstructure and high-temperature oxidation resistance of laser cladding in-situ synthesis Ti-A-Si composite coatings[J]. Optics and Precision Engineering, 27, 316-325(2019).

[16] Zhang Chi, Zhang Liwen, Shen Wenfei, et al. The processing map and microstructure evolution of Ni-Cr-Mo-based C276 superalloy during hot compression[J]. Journal of Alloys and Compounds, 728, 1269-1278(2017).

[17] Wang Xiaoming, Luo Gengxing, Hu Hao, et al. Microstructure and properties of laser cladding hastelloy C-276 coating on gun steel surface[J]. Applied Laser, 38, 321-327(2018).

[18] Lin Xingchen, Zhang Yawei, Zhu Hongbo, et al. 10 kW CW diode laser cladding source and thermal effect[J]. Chinese Optics, 12, 820-825(2019).

[19] Ma Guangyi, Wu Dongjiang, Wang Zhanhong, et al. Weld joint forming of thin hastelloy C-276 sheet ofpulsed laser welding[J]. Chinese Journal of Lasers, 38, 0603014(2011).

[20] Shen Hao, Cai Jie, Zhang Conglin, et al. Effect of laser process parameters on microstructures and properties of nicocraiysi laser cladding coating[J]. Acta Armamentarii, 42, 1524-1534(2021).

[21] Wang Tao, Qiao Weilin, Wang Ning, et al. Effect of scanning speed on microstructure and properties oflaser cladding NiCoCrAIY coating[J]. Laser & Optoelectronics Progress, 57, 211403(2020).