[1] [1] MUSMECI M, RENDTORFF N M, MUSANTE L, et al. Characterization of MgO-based tundish working lining materials, microstructure and properties［J］. Ceram Int, 2014, 40(9): 14091-14098.

[2] [2] SANTOS, M. F, MOREIRA, et al. Enhanced numerical tool to evaluate steel ladle thermal losses［J］. Ceram Int, 2018, 44: 12831-12840.

[3] [3] LUEBRSEN E, OBERBACH M. Refractories for continuous casting of steel requirements: current state and developments［J］. Inst Metals, 1985, 32: 1-9.

[4] [4] PINTO V S, FINI D S, MIGUEL V C, et al. Fast drying of high-alumina MgO-bonded refractory castables［J］. Ceram Int, 2020, 46 (8): 11137-11148.

[5] [5] AMARAL L F, OLIVEIRA I R, BONADIA P, et al. Chelants to inhibit magnesia (MgO) hydration［J］. Ceram Int, 2011, 37(5): 1537-1542.

[6] [6] SALOMO R, PANDOLFELLI V C. Magnesia sinter hydration- dehydration behavior in refractory castables［J］. Ceram Int, 2008, 34(8): 1829-1834.

[7] [7] SZCZERBA J, PROROK R, SNIEZEK E, et al. Influence of time and temperature on ageing and phases synthesis in the MgO-SiO2-H2O system［J］. Thermochim Acta, 2013, 567: 57-64.

[8] [8] SILVA W M, ANEZIRIS C G, BRITO M A M, et al. Effect of alumina and silica on the hydration behavior of magnesia-based refractory castables［J］. J Am Ceram Soc, 2011, 94(12): 4218-4225.

[10] [10] YAN P C, ENDE M A V, ZINNGREBE E, et al. Interaction between steel and distinct gunning materials in the tundish［J］. ISIJ Int, 2014, 54: 2551-2558.

[11] [11] SIMES J, JANSSON D. Impact from tundish lining composition on steel cleanness in the presence of additional air［J］. Ceram Forum Int, 2008, 85(10): 86-89.

[13] [13] FINI D S, MIGUEL V C, PINTO V S, et al. Aluminum lactate role in improving hydration and drying behavior of MgO-bonded refractory castables［J］. Ceram Int, 2020, 46(10): 17093-17102.

[14] [14] ZHANG Y, LI Y, XU Y, et al. Enhanced formation of magnesium silica hydrates (M-S-H) using sodium metasilicate and caustic magnesia in magnesia castables［J］. Ceram Int, 2017, 43: 9110-9116.

[15] [15] ZHANG S, LIAO N, LI Y, et al. M-S-H formation in MgO-SiO2 slurries via wet milling for magnesia-based castables［J］. Ceram Int, 2021, 47: 10880-10886.

[16] [16] ZHANG Y, MITHUN N, WANG J, et al. Temperature-dependent rehydration of magnesium silicate hydrate (M-S-H): Development of no-cement binder through MD/DFT validation［J］. Ceram Int, 2022, 48: 7063-7070.

[17] [17] KIKHTYANIN O, TILER Z, VELVARSK R, et al. Reconstructed Mg-Al hydrotalcites prepared by using different rehydration and drying time: Physico-chemical properties and catalytic performance in aldol condensation［J］. Appl Catal A-Gen, 2017, 536: 85-96.

[18] [18] JAVIER P, SNIA A, NIEK M. Memory effect of activated Mg-Al hydrotalcite: in situ XRD studies during decomposition and gas-phase reconstruction［J］. Chem Eur J, 2007, 13: 870-878.

[20] [20] NIED K, ENEMARK-RASMUSSEN K, L’HOPITAL E, et al. Properties of magnesium silicate hydrates (M-S-H) ［J］. Cem Concr Res, 2016, 79: 323-332.

[21] [21] ZHOU S, WEI, Y, LI B, et al. Kinetics study on the dehydroxylation and phase transformation of Mg3Si2O5(OH)4［J］. J Alloy Compd, 2017, 713: 180-186.

[23] [23] HUANG R, HE L, ZHANG T, et al. Fabrication and adsorption behavior of magnesium silicate hydrate nanoparticles towards methylene blue［J］. Nanomaterials, 2018, 8 271-281.

[25] [25] ZHANG Y, LI Y, Hydration evolution of MgO-SiO2 slurries in the presence of sodium metasilicate［J］. Ceram Int, 2018, 44: 6626-6633.

[26] [26] ZHANG T, VANDEPERRE L J, CHEESEMAN C R, Formation of magnesium silicate hydrate(M-S-H) cement pastes using sodium hexametaphosphate［J］. Cem Concr Res, 2014, 65: 8-14.

[27] [27] LIU X, ZHANG N, SUN H, Structural investigation relating to the cementitious activity of bauxite residue-red mud［J］. Cem Concr Res, 2011, 41: 847-853.