[1] [1] LIU W, XIE X H, LI SH Y. Present state and perspectives of micromachined inertial sensors ［J］. Opt.Precision Eng., 2003, 11(5): 425-431. (in Chinese)

[2] [2] BARBOUR N, SCHMIDT G. Inertial sensor technology trends ［J］.IEEE Sensors Journal, 2001, 1(4):332-339.

[3] [3] YAZDI N, AYAZI F, NAJAFI K. Micromachined inertial sensors ［J］. Proceedings of the IEEE, August 1998, 86(8): 1640-1659.

[4] [4] YOLEDVELOPPEMENT. Technology trends for inertial MEMS 2011 ［EB/OL］. http://www.yole.fr.

[5] [5] SHARMA A, ZAMAN M F, ZUCHER M, et al..A 0.1°/HR bias drift electronically matched tuning fork microgyroscope ［C］. IEEE 21st International Conference on Micro Electro Mechanical Systems, MEMS 2008, Tucson, 2008:6-9.

[6] [6] JASON K P H. Modeling and identification of the Jet Propulsion Laboratory vibratory rate microgyroscope ［D］. American: Mechanical engineering, University of California, 2002.

[7] [7] JIANG X S.Capacitive position-sensing interface for micromachined inertial sensors ［D］. America: University of California, Berkeley, 2003.

[8] [8] Draper Laboratory, The Draper Technology Digest 2004 ［EB/OL］.http://www.draper.com/technology_digest.html.

[9] [9] XIA D ZH, SHENG X, WANG SH R. A digital prototype miniature silicon microgyroscope ［C］.Proceedings of the 2010 5th IEEE International Conference on Nano/Micro Engineered and Moleular Systems, Xiamen, 2010: 429-432.

[10] [10] ZHANG R, GAO ZH Y, CHEN Z Y. A bulk micromachined vibrating wheel rate gyroscope ［C］.Proc. of the SPIE the International Society for Optical Engineering. Nanjing, 2001:54-58.

[11] [11] IEEE Std 528-2001. IEEE Standard for Inertial Sensor Terminology ［S］.New York: The Institute of Electrical and Electronics Engineers Inc., 2001.

[12] [12] ALLAN D W. Time and frequency (time-domain) characterization, estimation, and prediction of precision clocks and oscillators ［J］. IEEE Trans. Ultrason., Ferroelectr., Freq. Control, 1987, 34(6): 647-654.

[13] [13] HOPCROFT M A, NIX W D, KEENY T W.What is the Youngs modulus of silicon ［J］. Journal of Microelectromechanical Systems, 2010, 19(2): 229-238.

[14] [14] SAUKOSKI M, AALTONEN L, HALONEN K.Zero-rate output and quadrature compensation in vibratory MEMS gyroscopes ［J］. IEEE Sensors Journal, 2007, 7(12):1639-1652.

[15] [15] SHI Q, QIU A P, SU Y, et al.. Mechanical coupling error of silicon microgyroscope ［J］. Opt.Precision Eng., 2008, 16(5): 894-898. (in Chinese)

[16] [16] ARNAUD W. Bias contributions in a MEMS turning fork gyroscope ［J］. Journal of Microelectromechanical Systems, 2013, 22(2): 303-308.

[17] [17] SHARMA A, ZAMAN M F, AYAZI F. A 104-dB dynamic range transimpedance-based CMOS ASIC for tuning fork microgyroscopes ［J］.Journal of Solid-State Circuits, 2007, 42(8): 1790-1802.

[18] [18] SHI Q, SU Y, QIU A P, et al.. Device level vacuum packaging technologies of MEMS gyroscopes ［J］. Opt.Precision Eng., 2009, 17(8): 1987-1992. (in Chinese)

[19] [19] GABRIELSON T B. Mechanical-thermal noise in micromachined acoustic and vibration sensors ［J］. IEEE Trans on Electron Devices, 1993, 40 (5): 903-909.

[20] [20] ZHAO Y, QIU A P, SHI Q, et al..Modeling of sensing interface for micromachined gyroscope and its front-end optimization［J］. Opt.Precision Eng., 2013, 21(7): 1734-1740. (in Chinese)