Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

Zuolin Zhang; Mengjia Li; Jie Sun; Cong Chen; Jiangzhao Chen; Liming Ding

doi:10.1088/1674-4926/44/3/030202

Journal of Semiconductors, Volume. 44, Issue 3, 030202(2023)

Dimethylammonium cation stabilizes all-inorganic perovskite solar cells

Zuolin Zhang¹, Mengjia Li¹, Jie Sun³, Cong Chen^1,4、*, Jiangzhao Chen^2、**, and Liming Ding^3、***

¹State Key Laboratory of Reliability and Intelligence of Electrical Equipment, School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China

²Key Laboratory of Optoelectronic Technology & Systems (MoE), College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China

³Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China

⁴Macao Institute of Materials Science and Engineering (MIMSE), Macau University of Science and Technology, Macau 999078, China

show less

References(38)

[1] G Yu, K J Jiang, W M Gu et al. Vacuum-assisted thermal annealing of CsPbI3 for highly stable and efficient inorganic perovskite solar cells. Angew Chem Int Ed, 61, e202203778(2022).

[2] H Wang, H Liu, Z Dong et al. Composition manipulation boosts the efficiency of carbon-based CsPbI3 perovskite solar cells to beyond 14%. Nano Energy, 84, 105881(2021).

[3] X Jia, C Zuo, S Tao et al. CsPb(IxBr1–x)3 solar cells. Sci Bull, 64, 1532(2019).

[4] Y Wang, X Zhang, Z Shi et al. Stabilizing α-phase FAPbI3 solar cells. J Semicond, 43, 040202(2022).

[5] Y Yuan, G Yan, R Hong et al. Quantifying efficiency limitations in all-inorganic halide perovskite solar cells. Adv Mater, 34, e2108132(2022).

[6] Z Li, F Zhou, Q Wang et al. Approaches for thermodynamically stabilized CsPbI3 solar cells. Nano Energy, 71, 104634(2020).

[7] T Tian, M Yang, J Yang et al. Stabilizing black-phase CsPbI3 under over 70% humidity. J Semicond, 43, 030501(2022).

[8] K Wang, Z Li, F Zhou et al. Ruddlesden-popper 2D component to stabilize γ-CsPbI3 perovskite phase for stable and efficient photovoltaics. Adv Energy Mater, 9, 1902529(2019).

[9] J Tian, Q Xue, Q Yao et al. Inorganic Halide perovskite solar cells: progress and challenges. Adv Energy Mater, 10, 2000183(2020).

[10] Q Wang, X Zheng, Y Deng et al. Stabilizing the α-phase of CsPbI3 perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule, 1, 371(2017).

[11] E M Sanehira, A R Marshall, J A Christians et al. Enhanced mobility CsPbI3 quantum dot arrays for record-efficiency, high-voltage photovoltaic cells. Sci Adv, 3, eaao4204(2017).

[12] A Swarnkar, A R Marshall, E M Sanehira et al. Quantum dot-induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics. Science, 354, 92(2016).

[13] F Bai, J Zhang, Y Yuan et al. A 0D/3D heterostructured all-inorganic halide perovskite solar cell with high performance and enhanced phase stability. Adv Mater, 31, 1904735(2019).

[14] Z Li, Y Sun, H Yao et al. Intermediates transformation for efficient perovskite solar cells. J Energy Chem, 52, 102(2021).

[15] G E Eperon, G M Paternò, R J Sutton et al. Inorganic caesium lead iodide perovskite solar cells. J Mater Chem A, 3, 19688(2015).

[16] Y G Kim, T Y Kim, J H Oh et al. Cesium lead iodide solar cells controlled by annealing temperature. Phys Chem Chem Phys, 19, 6257(2017).

[17] T Zhang, M I Dar, G Li et al. Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI3 perovskite phase for high-efficiency solar cells. Sci Adv, 3, e1700841(2017).

[18] S M Yoon, H Min, J B Kim et al. Surface engineering of ambient-air-processed cesium lead triiodide layers for efficient solar cells. Joule, 5, 183(2021).

[19] B Yu, J Shi, S Tan et al. Efficient (>20 %) and stable all-inorganic cesium lead triiodide solar cell enabled by thiocyanate molten salts. Angew Chem Int Ed, 60, 13436(2021).

[20] C Lu, X Li, X Guo et al. Efficient inverted CsPbI3 perovskite solar cells fabricated in common air. Chem Eng J, 452, 139495(2023).

[21] Y Cui, J Shi, F Meng et al. A versatile molten-salt induction strategy to achieve efficient CsPbI3 perovskite solar cells with a high open-circuit voltage >1.2 V. Adv Mater, 34, e2205028(2022).

[22] Y Jiang, J Yuan, Y Ni et al. Reduced-dimensional α-CsPbX3 perovskites for efficient and stable photovoltaics. Joule, 2, 1356(2018).

[23] Q Huang, Y Liu, F Li et al. Advances in cesium lead iodide perovskite solar cells: processing science matters. Mater Today, 47, 156(2021).

[24] H Bian, H Wang, Z Li et al. Unveiling the effects of hydrolysis-derived DMAI/DMAPbIx intermediate compound on the performance of CsPbI3 solar cells. Adv Sci, 7, 1902868(2020).

[25] W Ke, I Spanopoulos, C C Stoumpos et al. Myths and reality of HPbI3 in halide perovskite solar cells. Nat Commun, 9, 4785(2018).

[26] M V Lee, S R Raga, Y Kato et al. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells. J Mater Res, 32, 45(2016).

[27] Y Pei, Y Liu, F Li et al. Unveiling property of hydrolysis-derived DMAPbI3 for perovskite devices: composition engineering, defect mitigation, and stability optimization. iScience, 15, 165(2019).

[28] X Gu, W Xiang, Q Tian et al. Rational surface-defect control via designed passivation for high-efficiency inorganic perovskite solar cells. Angew Chem Int Ed, 60, 23164(2021).

[29] X Sun, Z Shao, Y Rao et al. A Low-Temperature Additive-involved leaching method for highly efficient inorganic perovskite solar cells. Adv Energy Mater, 11, 2002754(2020).

[30] S Jariwala, R E Kumar, G E Eperon et al. Dimethylammonium addition to halide perovskite precursor increases vertical and lateral heterogeneity. ACS Energy Lett, 7, 204(2022).

[31] M Jung, S G Ji, G Kim et al. Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications. Chem Soc Rev, 48, 2011(2019).

[32] Y Wang, M I Dar, L K Ono et al. Thermodynamically stabilized β-CsPbI3-based perovskite solar cells with efficiencies >18%. Science, 365, 591(2019).

[33] Y Wang, X Liu, T Zhang et al. The role of dimethylammonium iodide in CsPbI3 perovskite fabrication: additive or dopant. Angew Chem Int Ed, 58, 16691(2019).

[34] Y Chen, X Liu, Y Zhao. Organic matrix assisted low-temperature crystallization of black phase inorganic perovskites. Angew Chem Int Ed, 134, e202110603(2022).

[35] X Sun, Z Shao, Z Li et al. Highly efficient CsPbI3/Cs1–xDMAxPbI3 bulk heterojunction perovskite solar cell. Joule, 6, 850(2022).

[36] Y Liu, F Li, J Gong et al. Low-temperature removal of residual dimethylammonium via surface molecular oligomerization for CsPbI3 perovskite solar cells. ACS Energy Lett, 7, 3227(2022).

[37] F Meng, B Yu, Q Zhang et al. Ge incorporation to stabilize efficient inorganic CsPbI3 perovskite solar cells. Adv Energy Mater, 12, 2103690(2022).

[38] Y Ding, Q Guo, Y Geng et al. A low-cost hole transport layer enables CsPbI2Br single-junction and tandem perovskite solar cells with record efficiencies of 17.8 % and 21.4 %. Nano Today, 46, 101586(2022).

Tools

Get Citation

Copy Citation Text

Zuolin Zhang, Mengjia Li, Jie Sun, Cong Chen, Jiangzhao Chen, Liming Ding. Dimethylammonium cation stabilizes all-inorganic perovskite solar cells[J]. Journal of Semiconductors, 2023, 44(3): 030202

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Articles

Received: Dec. 23, 2022

Accepted: --

Published Online: Mar. 30, 2023

The Author Email: Chen Cong (chencong@hebut.edu.cn), Chen Jiangzhao (jiangzhaochen@cqu.edu.cn), Ding Liming (ding@nanoctr.cn)

DOI:10.1088/1674-4926/44/3/030202

Topics

laser devices and laser physics

Lasers and Laser Optics

Laser physics

laser manufacturing

Instrumentation, Measurement and Metrology