Researching | Reliability analysis of helium pressure non-destructive testing method of the fuel rod

NUCLEAR TECHNIQUES, Volume. 46, Issue 7, 070607(2023)

Reliability analysis of helium pressure non-destructive testing method of the fuel rod

Fan HUANG^*, Zhenan ZHU, Hui CAO, Wenxin YU, and Xiaoyuan MENG

Author Affiliations

CNNC Nuclear Fuel Components Co., Ltd., Yibin 644000, China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (15)

References (14)

Paper Information

References(14)

[1] FU Jiqing. AFA 3G Gd rod top end plug girth TIG wilding[J]. Dongfang Electric Review, 18, 115-120(2004).

[2] JIANG Huijing, YANG Xiaoyong, DING Ming et al. Analysis of leakage characteristics of helium turbine cycle in 10 MW high temperature gas cooled reactor[J]. Chinese High Technology Letters, 25, 411-416(2015).

[3] Rosenkrantz E, Ferrandis J Y, Leveque G et al. Ultrasonic measurement of gas pressure and composition for nuclear fuel rods[J]. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 603, 504-509(2009).

[4] YANG Jiong, LEI Chunhui, MA Xianhong. Study on helium leak detection system for heat transfer tube of steam generator in nuclear power plant[J]. Nuclear Power Engineering, 42, 219-224(2021).

[5] Ferrandis J Y, Rosenkrantz E, Lévêque G et al. Full-scale hot cell test of an acoustic sensor dedicated to measurement of the internal gas pressure and composition of a LWR nuclear fuel rod[J]. IEEE Transactions on Nuclear Science, 60, 2894-2897(2013).

[6] LIU Yandong, LIU Jinhua, GAO Zhenbo et al. Introduction to helium leakage detection methods for pressure vessels[J]. Yizhong Technology, 2(2002).

[7] JIANG Wei, MIAO Zhenyu. Research on leakage detection technology for high pressure heaters in nuclear power plants[J]. Vacuum, 3(2019).

[8] Kuang L, Jiang L, Ren L et al. Study on helium leak detecting for post irradiation fuel rods[C], 55782, V001T02A021(2013).

[9] XUE Datong, XIAO Xiangzheng, WANG Genglin. Conditions for determining qualified leakage rate through fine leak detection of sealed devices by pressing helium and pre filling helium[J]. Journal of Vacuum Science and Technology(2013).

[10] LI Tao, ZHANG Bin, LIU Lubei et al. Design and test of the helium pneumatic tuner based on 162.5 MHz superconducting cavity[J]. Nuclear Techniques, 38, 100201(2015).

[11] LI Ningbo, LI Fei et al. Study on multiple helium pressure and pre filled helium pressure mass spectrometry fine leak detection methods[J]. Journal of China Academy of Electronic Sciences, 9, 6(2014).

[12] YU Jiyang, WANG Songtao, ZHANG Xiangyu et al. Numerical simulation on scatheless measurement of helium pressure in fuel rod[J]. Chinese Journal of Nuclear Science and Engineering, 27, 193-197(2007).

[13] Maximkin A I, Kryukov I S, Ableev A N et al. Experimental research and development of safety analysis systems for advanced types of fuel rods[C](2018).

[14] ZHANG Jian, XU Jianping, CHEN Changyou et al. The determination of helium volume ratios in the fuel rod of Fast breeder reactor[J]. Science and Technology Innovation Herald, 11, 195-197(2014).

Tools

Get Citation

Copy Citation Text

Fan HUANG, Zhenan ZHU, Hui CAO, Wenxin YU, Xiaoyuan MENG. Reliability analysis of helium pressure non-destructive testing method of the fuel rod[J]. NUCLEAR TECHNIQUES, 2023, 46(7): 070607

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Research Articles

Received: Feb. 9, 2023

Accepted: --

Published Online: Aug. 3, 2023

The Author Email: HUANG Fan (879967686@qq.com)

DOI:10.11889/j.0253-3219.2023.hjs.46.070607

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology