Opto-Electronic Engineering, Volume. 50, Issue 5, 230014(2023)

Optical system design of wedge beam splitter splitting mid-wave infrared Fizeau interferometer

Shuai Yang... Yang Li*, Wenxi Zhang, Zhou Wu, Rikang Qin and Yaoxuan Fan |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    Figures & Tables(18)
    Schematic design of the wedge splitting mediumwave infrared Fizeau interferometer
    Return error of the interference system. (a) Return error diagram of the reflective collimating optical interference system; (b) Return error of the reflective and transmissive collimating optical path interference system
    Schematic diagram of the optical path of the wedge beam splitter wavefront simulation
    Optimal wedge beam splitter anglewbest curves for different collimator F# and tilt angles of the wedge beam splitter T
    Wavefront PV curve of the plate beam splitter and wedge beam splitter interference system at different tilt angles of the beam splitter T
    Wavefront PV curve of the wedge beam splitter interference system. (a) Relationship between wavefront PV of wedge beam splitter interferometric system and collimator F#; (b) Relationship between wavefront PV of wedge beam splitter interferometric system and tilt angle of wedge beam splitter T
    Relationship curve between the optimal wedge beam splitter anglewbest, wavefront PV of wedge beam splitter interference system and the focal length of the collimator
    Illumination path of the wedge splitting medium wave infrared Fizeau interferometer
    Design results of the collimator. (a) PV of collimated wavefront for the collimator at 0° field of view; (b) PV of collimated wavefront for the collimator at 0.1° field of view; (c) Angular aberration of the normalized exit aperture for the collimator at 0° field of view
    Monte carlo simulation tolerance analysis of the collimator
    Image quality evaluation of the interferometer imaging optical path. (a) Imaging wavefront PV of the normalized field; (b) MTF curve; (c) Distortion curve
    Monte carlo simulation tolerance analysis of the interferometer imaging optical path
    Stray light analysis diagram of the wedge beam splitter. (a) Schematic diagram of stray light introduced by reflection fromthe front and rear surfaces of the wedge beam splitter; (b) Light traces at the aperture diaphragm surface
    Retrace error of wedge splitting medium wave infrared Fizeau interferometer
    • Table 1. Wavefront standard Zernike polynomial coefficients for the plate beam splitter and wedge beam splitter at a tilt angle of beam splitter T=20°

      View table
      View in Article

      Table 1. Wavefront standard Zernike polynomial coefficients for the plate beam splitter and wedge beam splitter at a tilt angle of beam splitter T=20°

      Plate beam splitterWedge beam splitter
      Z50.00000.0000
      Z60.0702−0.0004
      Z70.01170.0048
      Z80.00000.0000
      Z9−0.00050.0009
      Z100.00000.0000
    • Table 2. Collimator and imaging lens design parameters

      View table
      View in Article

      Table 2. Collimator and imaging lens design parameters

      Wavelength/μmF#Focal length/mm
      Collimator3.395762
      Imaging lens3.395.8235
    • Table 3. Lens data of the wedge splitting medium wave infrared Fizeau interferometer

      View table
      View in Article

      Table 3. Lens data of the wedge splitting medium wave infrared Fizeau interferometer

      CommentSurf. typeRadiusThicknessMaterialSemi-diameterConicTilt about X
      OBJStandardInfinityInfinity-Infinity--
      1CollimatorEven asphere1091.61526.000ZnSe78.000−1.862-
      2StandardInfinity580.000-78.000--
      3Wedge beam splitterCoordinate break-0.000-0.000-−17.500
      4StandardInfinity5.000CaF225.400--
      5Coordinate break-0.000-0.000-−0.200
      6StandardInfinity0.000-25.400--
      7Coordinate break-0.000-0.000-0.200 (P)
      8Coordinate break-166.347-0.000-17.500(P)
      STOStandardInfinity26.960-3.000--
      10Imaging lensStandard37.2746.000ZnSe9.000--
      11Standard30.0005.000-9.000--
      12Standard164.9845.000ZnSe9.000--
      13Standard−52.37933.554-9.000--
      IMAStandardInfinity--3.503--
    • Table 4. Tolerance table for the collimator

      View table
      View in Article

      Table 4. Tolerance table for the collimator

      Tolerance typesTolerance data
      Radius/%0.1
      Surface irregularity(RMS)/λ(λ=0.6328 μm)λ/40
      Conic±0.01
      Thickness/mm±0.05
      Surface tilt/(°)±0.05
      Surface dec/mm±0.05
      Element tilt/(°)±0.05
      Element dec/mm±0.05
    Tools

    Get Citation

    Copy Citation Text

    Shuai Yang, Yang Li, Wenxi Zhang, Zhou Wu, Rikang Qin, Yaoxuan Fan. Optical system design of wedge beam splitter splitting mid-wave infrared Fizeau interferometer[J]. Opto-Electronic Engineering, 2023, 50(5): 230014

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Article

    Received: Jan. 16, 2023

    Accepted: Mar. 21, 2023

    Published Online: Jul. 4, 2023

    The Author Email:

    DOI:10.12086/oee.2023.230014

    Topics