[1] [1] QIN M L, QU X H, LIN J L, et al. Progress in research and development of aluminum nitride(AlN) ceramics［J］. Rare Metal Materials and Engineering, 2002, 31(1): 8-12 (in Chinese).

[2] [2] FU L, QIAO L, ZHENG J W, et al. Phase, microstructure and sintering of aluminum nitride powder by the carbothermal reduction-nitridation process with Y2O3 addition［J］. Journal of the European Ceramic Society, 2018, 38(4): 1170-1178.

[3] [3] JIANG H, WANG X H, LEI W, et al. Effects of two-step sintering on thermal and mechanical properties of aluminum nitride ceramics by impedance spectroscopy analysis［J］. Journal of the European Ceramic Society, 2019, 39(2/3): 249-254.

[4] [4] HE X L, YE F, ZHANG H J, et al. Study of rare-earth oxide sintering additive systems for spark plasma sintering AlN ceramics［J］. Materials Science and Engineering: A, 2010, 527(20): 5268-5272.

[5] [5] LI B R, WEN B, CHEN H Z, et al. Corrosion behaviour and related mechanism of lithium vapour on aluminium nitride ceramic［J］. Corrosion Science, 2021, 178: 109058.

[6] [6] MEDRAJ M, BAIK Y, THOMPSON W T, et al. Understanding AlN sintering through computational thermodynamics combined with experimental investigation［J］. Journal of Materials Processing Technology, 2005, 161(3): 415-422.

[7] [7] KOLTSOV A, DUMONT M, HODAJ F, et al. Influence of Ti on wetting of AlN by Ni-base alloys［J］. Materials Science and Engineering: A, 2006, 415(1/2): 171-176.

[8] [8] LI Q G, WU C, WANG Z. Mechanical properties and microstructures of nano-Al2O3 particles reinforced Al2O3/AlN composite［J］. Journal of Alloys and Compounds, 2015, 636: 20-23.

[9] [9] DATYE A, WU K H, KULKARNI S, et al. Aluminum nitride multi-walled nanotube (MWNTs) nanocomposite by direct in-situ growth of CNTs on aluminum nitride particles［M］. Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III. 2009: 189-204.

[10] [10] KONDO N, SHIMAMURA A, HOTTA M, et al. Control of microstructure and mechanical properties of sintered aluminum nitride through addition of aluminum nitride whiskers［J］. Journal of Asian Ceramic Societies, 2021, 9(3): 1248-1254.

[11] [11] LIU H J, SUN H W, ZHAO R, et al. Synthesis and luminescent properties of YAlO3: Eu3+, Cu+ red phosphors［J］. Journal of Zhengzhou University (Natural Science Edition), 2012, 44(1): 83-87 (in Chinese).

[12] [12] SREEBUNPENG K, JANTHON P, CHEWPRADITKUL W, et al. Scintillation characteristics of YAlO3:Pr perovskite single crystals［J］. Optical Materials, 2020, 108: 110161.

[13] [13] LU Q M, WANG H J, DONG W S, et al. Progress of research on preparation and properties of yttrium aluminium garnet fibers［J］. Journal of Inorganic Materials, 2001, 16(4): 595-600 (in Chinese).

[14] [14] GATZEN C, MACK D E, GUILLON O, et al. YAlO3: a novel environmental barrier coating for Al2O3/Al2O3-ceramic matrix composites［J］. Coatings, 2019, 9(10): 609.

[15] [15] HUANG D, TIAN Z B, CUI W, et al. Effects of Y2O3 and yttrium aluminates as sintering additives on the thermal conductivity of AlN ceramic substrates［J］. Ceramics International, 2018, 44(16): 20556-20559.

[16] [16] WANG C, PENG C Q, WANG R C, et al. Research progress of low-temperature sintering aids of AlN ceramic［J］. Powder Metallurgy Technology, 2009, 27(1): 62-66 (in Chinese).

[17] [17] YOU X Q, SI T Z, LIU N, et al. Effect of grain size on thermal shock resistance of Al2O3-TiC ceramics［J］. Ceramics International, 2005, 31(1): 33-38.

[18] [18] SIMKIN B A, CRIMP M A, BIELER T R. A factor to predict microcrack nucleation at γ-γ grain boundaries in TiAl［J］. Scripta Materialia, 2003, 49(2): 149-154.

[19] [19] YEH C T, TUAN W H. Oxidation mechanism of aluminum nitride revisited［J］. Journal of Advanced Ceramics, 2017, 6(1): 27-32.

[20] [20] YUE R F, WANG Y X, CHEN C H. Survey on initial oxidation behavior of aln ceramic substrate in air［J］. Journal of the Chinese Ceramic Society, 1998, 26(5): 565-570 (in Chinese).

[21] [21] ZHOU Y Y, HU J L, DAI C G. Study on thermal shock resistance of Al2O3 ceramics［J］. Shandong Ceramics, 2020, 43(4): 6-9 (in Chinese).