Laser & Optoelectronics Progress, Volume. 57, Issue 1, 012202(2020)
Design of Dual-Vision Double Telecentric Optical System Based on Machine Vision
Fig. 1. Diagram of common solution
Fig. 2. Diagram of solution in this paper
Fig. 3. System initial structural diagram
Fig. 4. Outline drawing of optical system
Fig. 5. MTF plots when magnification is -0.1375
Fig. 6. MTF plots when magnification is -0.275
Fig. 7. System distortion diagram when magnification is -0.1375
Fig. 8. System distortion diagram when magnification is -0.275
Fig. 9. Spot diagrams when magnification is -0.1375
Fig. 10. Spot diagrams when magnification is -0.275
Fig. 11. Monte Carlo simulation results. (a) Most influential tolerance and its position in structure 1 (magnification is -0.1375); (b) most influential tolerance and its position in structure 2 (magnification is -0.275); (c) MTF curves obtained by Monte Carlo simulation of structure 1 (magnification is -0.1375); (d) MTF curves obtained by Monte Carlo simulation of structure 2 (magnification is -0.275); (e) distortion curves obtained by Monte Carlo simulation of structure 1 (magnification is -0.1375); (f
|
|
|
|
Get Citation
Copy Citation Text
Wenwei Ye, Tianfu Zhou, Jinxuan Huang, Feng Lin. Design of Dual-Vision Double Telecentric Optical System Based on Machine Vision[J]. Laser & Optoelectronics Progress, 2020, 57(1): 012202
Category: Optical Design and Fabrication
Received: May. 15, 2019
Accepted: Jun. 26, 2019
Published Online: Jan. 3, 2020
The Author Email: Ye Wenwei (yww_dyx@163.com), Lin Feng (lfeng127@163.com)