[1] [1] AKKAYA Y, SHAH S P, ANKENMAN B. Effect of fiber dispersion on multiple cracking of cement composites［J］. Journal of Engineering Mechanics, 2001, 127(4): 311-316.

[2] [2] AKKAYA Y, PICKA J, SHAH S P. Spatial distribution of aligned short fibers in cement composites［J］. Journal of Materials in Civil Engineering, 2000, 12(3): 272-279.

[3] [3] LI F Y, CAO C Y, CUI Y X, et al. Experimental study of the basic mechanical properties of directionally distributed steel fibre-reinforced concrete［J］. Advances in Materials Science and Engineering, 2018, 2018: 3578182.

[4] [4] XIONG Y M, YANG M, ZHAO J K, et al. Transverse isotropic compression behavior of aligned steel fiber UHPC produced by electromagnetic field［J］. Construction and Building Materials, 2024, 411: 134579.

[5] [5] SU A S, HUANG H H, GAO X J. Preparation and performance of UHPC based on flow-induced fiber orientation［J］. China Building Materials Science & Technology, 2020, 29(5): 77-81 (in Chinese).

[6] [6] SHEN X J, SHAO X D, EUGEN B. Tensile response of strain-hardening ultra-high performance fiber concrete thin layer based on fiber orientation distribution［J］. Journal of the Chinese Ceramic Society, 2021, 49(11): 2384-2392 (in Chinese).

[7] [7] BI J H, XU D, BAO C, et al. Numerical simulation of steel fiber reinforced concrete casting & research on fibers distribution and orientation［J］. Special Structures, 2015, 32(6): 113-118+66 (in Chinese).

[8] [8] CHEN N. Preliminary study on oriented steel fiber reinforced concrete bearing members［J］. Sci & Tech, Information of Water Transportation, 2000(4): 22-24 (in Chinese).

[9] [9] HUANG H H, GAO X J, LI L S, et al. Improvement effect of steel fiber orientation control on mechanical performance of UHPC［J］. Construction and Building Materials, 2018, 188: 709-721.

[10] [10] YAO L, YE L S, QIAN H W. Post-cracking efficiency factors for fibres of random short fibres reinforced concrete［J］. Journal of Southeast University (Natural Science Edition), 1983, 13(1): 87-95 (in Chinese).

[11] [11] TIAN W L, MA L X, ZHANG K J, et al. Investigation of fibre distribution on aligned steel fibre cement-based composite materials［J］. Building Science, 2016, 32(3): 14-18 (in Chinese).

[12] [12] SONG S M, SUN L. Civil engineering materials［M］. 2nd ed. Wuhan: Wuhan University Press, 2011 (in Chinese).

[13] [13] HE J Y, LI R J, WANG J Z. The study of the influence of sand percentage on the workability and strength of concrete［J］. Journal of Hebei Institute of Architectural Science and Technology, 2002, 19(4): 27-29+43 (in Chinese).

[14] [14] LI M Y, LIU Y, HAN J G, et al. Influences of sand ratio and paste aggregate ratio on fresh properties of high-fluidity concrete［J］. Journal of the Chinese Ceramic Society, 2020, 48(7): 1107-1113 (in Chinese).

[15] [15] QIU Y, DING B, ZHENG C Y, et al. Influence of sand percentage on strength and workability of C30-C50 concrete［J］. Bulletin of the Chinese Ceramic Society, 2016, 35(10): 3486-3491 (in Chinese).

[16] [16] ZHAO X T, YANG D Y, ZHU C X, et al. Study on sand ratio of ultra high performance concrete［J］. Concrete, 2021(1): 17-19+24 (in Chinese).

[17] [17] MU R, ZHAO Q M, TIAN W L. Investigation on the preparation and properties of aligned steel fibre reinforce cement paste［J］. Journal of Hebei University of Technology, 2012, 41(2): 101-104 (in Chinese).

[18] [18] MU R, LI H, WANG X W, et al. Aligned steel fibre reinforced cement based composites(II): preparation and reinforcement of aligned steel fibres［J］. Journal of Building Materials, 2015, 18(3): 387-392 (in Chinese).

[19] [19] MU R, QIU X, ZHAO Q M, et al. Aligned steel fibre reinforced cement based composites(I): orientation control of steel fibres［J］. Journal of Building Materials, 2015, 18(2): 208-213 (in Chinese).

[20] [20] MU R, LI H, QING L B, et al. Aligning steel fibers in cement mortar using electro-magnetic field［J］. Construction and Building Materials, 2017, 131: 309-316.

[21] [21] ZHOU J. Research the where abouts of ld cylinder in viscous liquid［J］. Physical Experiment of College, 2012, 25(4): 87-89 (in Chinese).

[22] [22] WANG Y, XU J X, JIANG L H, et al. Mechanical properties of cement mortar reinforced with aligned carbon fibers by magnetic field［J］. Acta Materiae Compositae Sinica, 2019, 36(11): 2726-2733 (in Chinese).

[23] [23] DUPONT D, VANDEWALLE L. Distribution of steel fibres in rectangular sections［J］. Cement and Concrete Composites, 2005, 27(3): 391-398.

[24] [24] LEE C, KIM H. Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concrete［J］. Cement and Concrete Research, 2010, 40(5): 810-819.