Acta Optica Sinica, Volume. 38, Issue 3, 328010(2018)
Recent Progress of Optical Fiber Fabry-Perot Sensors
[5] Sun J Y, Chen W M, Zhu Y et al. Influence of optical source spectrum on optical fiber F-P strain sensor[J]. Acta Optica Sinica, 22, 596-600(2002).
[7] Wang W Y, Wen J X, Pang F F et al. All single-mode fiber Fabry-Perot interferometric high temperature sensor fabricated with femtosecond laser[J]. Chinese Journal of Lasers, 39, 1005001(2012).
[9] Duan D W, Zhu T, Rao Y J et al. A miniature extrinsic Fabry-Perot interferometer strain sensor based on hollow-core photonic crystal fiber[J]. Acta Optica Sinica, 28, 17-20(2008).
[14] Tang Q T. Study on strain/temperature characteristics and demomulation methods of Fabry-Perot cavities fabricated by a femtosecond laser[D]. Chongqing: Chongqing University(2007).
[15] Li C, Guo T T, Xiao J et al. Interference characteristics analysis of optical fiber Fabry-Perot cavity with graphene diaphragm[J]. Journal of Beijing University of Aeronautics and Astronautics, 41, 574-579(2015).
[21] Eric U. Fiber optics sensors: an introduction for engineers and scientists[M]. New York: John Wiley & Sons(1991).
[22] Meller S A. Extrinsic Fabry-Perot interferometer system using wavelength modulated source[D]. Virginia: Virginia Polytechnic Institute and State University(1996).
[23] Feng J. Investigation of the accuracy of FP strain gauge and its application on the bridge health monitoring[D]. Chongqing: Chongqing University(2000).
[24] Xu H Y, Lei X H, Chen W M et al. Demodulation error of fringe counting method for optical fiber Fabry-Perot sensor[J]. Acta Photonica Sinica, 45, 1207003(2016).
[25] Zhang P. Study on transform demodulation theory of optical fiber Fabry-Perot sensor and implementation of embedded system[D]. Chongqing: Chongqing Univeristy(2005).
[26] Musa S M, Claus R O, Reed J H et al. Real-time signal processing and hardware development for a wavelength modulated optical fiber sensor system[D]. Virginia: Virginia Polytechnic Institute and State University(1997).
[27] Wang N. Fiber Fabry-Perot strain gauge based on the technology of wavelength analysis for bridge health monitoring[D]. Chongqing: Chongqing University(2002).
[28] Chen Y S. Algorithms and mutiplexing of fiber Fabry-Ferot strain sensor[D]. Chongqing: Chongqing University(2003).
[29] Chen W M, Wang N, Zhu Y et al. Experimental study on the affection of Gaussian spectrum of light source on the optical fiber F-P strain sensor[J]. Chinese Journal of Lasers, 30, 88-92(2003).
[30] Chen T, Xie L H, Xie L et al. Optical fiber Fabry-Perot sensing system based on blackbody radiation in high temperature applications[C]. SPIE, 10382, 103820C(2017).
[34] Jones M E, Grace J L, Greene J A et al. Multiplexed absolute strain measurements using extrinsic Fabry-Perot interferometers[C]. SPIE, 2444, 267-275(1995).
[35] Chen W M, Zhu Y, Tang X C et al. Study on the serial multiplex of optical fiber Fabry-Perot strain sensors with Fourier transform[J]. Acta Optica Sinica, 24, 1481-1486(2004).
[36] Jiang L J, Jiang J F, Liu T G et al. Demodulation of cascade optical fiber Fabry-Perot pressure sensor[J]. Acta Photonica Sinica, 41, 283-287(2012).
[37] Rao Y, Zhou C, Zhu T. A novel chirped-FBG-based F-P sensor network using SFDM/WDM[C]. Optical Fiber Sensors, Optical Society of America, FA6(2006).
[41] Lang J P, Chang T Y, Chen J D et al. Improved phase generated carrier modulation and demodulation method[J]. Acta Photonica Sinica, 45, 1207004(2016).
[42] Shun J Y. Technological study on fiber Fabry-Perot strain sensor demodulated by tunable Fabry-Perot[D]. Chongqing: Chongqing University(2002).
[43] Shun J Y, Chen W M, Zhu Y et al. An optic fiber Fabry-Perot strain sensor system based on tunable Fabry-Perot[J]. Laser Journal, 23, 49-50(2002).
[45] Hornak J, Duncan J, Gaffan D. Fiber optic sensors for the refinery of the future[C]. IEEE Sensors for Industry Conference, 40-43(2002).
[47] Li L, Liu T G, Jiang J F et al. Birefringent wedges effects on cross-correlation polarization demodulation in optical fiber Fabry-Perot sensors[J]. Journal of Optoelectronics·Laser, 23, 67-73(2012).
[48] Shi J F, Liu T G, Wang S et al. Spatial electronic scanned low-coherence interference long distance optical fiber sensing and demodulation system[J]. Acta Optica Sinica, 36, 0406001(2016).
[49] Jiang J F, Liu T G, Liu K, demodulation method thereof: 102052902A[P] et al. -05-11(2011).
[50] Lei X H, Chen T, Chen W M, method: 106017519A[P] et al. -10-12(2016).
[51] Tran T A, Greene J A, Murphy K A et al. EFPI manufacturing improvements for enhanced performance and reliability[C]. Smart Structures and Materials, 2447, 312-323(1995).
[52] Xu L C, Deng M, Zhu T et al. Fabry-Perot interferometer sensor for high temperature measurement based on photonic crystal fiber[J]. Opto-Electronic Engineering, 39, 21-25(2012).
[53] Chen Y. Investigation of multimode and sapphire optic fiber Fabry-Perot sensors[D]. Chengdu: University of Electronic Science and Technology of China(2011).
[55] Liang D K, Li D S, Pan X W et al. Study of fiber-optic smart layer system based on Fabry-Perot strain sensor[J]. Chinese Journal of Scientific Instrument, 26, 226-228(2005).
[56] Liu T G, Wang S, Jiang J F et al. Advances in optical fiber sensing technology for aviation and aerospace application[J]. Chinese Journal of Scientific Instrument, 35, 1681-1692(2014).
[57] Zhao P, Liu T G, Jiang J F et al. Fiber optic acoustic vibration sensor for the monitoring of water sublumator[J]. Acta Optica Sinica, 34, 0106003(2014).
[58] Wu Z H, Liu T G, Jiang J F et al. Effect of thermal stress and residual gas pressure on the thermal response of optical fiber Fabry-Perot pressure sensor[J]. Acta Optica Sinica, 35, 0328005(2015).
[59] Shan N, Shi Y K, Liu X. Detecting crack of aircraft engine blade based on optical fiber F-P sensor[J]. Nondestructive Testing, 31, 206-207(2009).
[60] Fusiek G, Niewczas P, Burt G M. Preliminary evaluation of a high-pressure, high-temperature downhole optical sensor. [C]∥Proceedings of 2011 IEEE Sensors, 409-412(2011).
[61] Li L H, Jiang Y, Liu Y W. The fiber-optic technique for the measurement of the liquid surface in coal bed methane well[J]. Optical Technique, 41, 442-444(2015).
[62] Zhu Y, Fu Y M, Chen W M et al. A health monitoring system for the Dafosi Yangtze River bridge[J]. China Civil Engineering Journal, 38, 66-71(2005).
[63] Gan X, Zhu Y, Zhang P et al. Multi-channel fiber optical Fabry-Perot strain testing system for the ShiBanpo Yangtze River bridge[J]. China Measurement Technology, 34, 128-130(2008).
[64] Li J F. Manufacturing technology for optical fiber extrinsic Fabry-Perot interferometer sensor[D]. Chongqing: Chongqing Universisy(2016).
[65] Chen W M, Liu L, Liu X M et al. -08-17(2011).
[66] Zhu Y, Chen W M. -11-06[P]. Chen X Q. Temperature compensation Fabry-Perot optical fiber strain sensor specially for concrete: 1378078A.(2002).
[69] Zhang K Y, Zhao H, Yang Y Q et al. High voltage electrostatic sensor based on Fabry-Perot interferometer[J]. Acta Optica Sinica, 34, 1106002(2014).
[70] Guo S P, Gao Y Y, Xu L N et al[J]. Partial discharges detection system based on fiber Fabry-Perot sensors Instrument Technique and Sensor, 2015, 61-64.
[71] Wang R H. Study on novel optical fiber gas refractometer Xi'an:[D]. Northwest University(2014).
[72] Zhang J, Zhao C L, Zeng D P et al. Fabry-Perot interferometric fiber-optic ultrasonic hydrophone based on parylene film[J]. Piezoelectrics and Acoustooptics, 34, 355-358(2012).
Get Citation
Copy Citation Text
Chen Weimin, Lei Xiaohua, Zhang Wei, Liu Xianming, Liao Changrong. Recent Progress of Optical Fiber Fabry-Perot Sensors[J]. Acta Optica Sinica, 2018, 38(3): 328010
Special Issue:
Received: Nov. 24, 2017
Accepted: --
Published Online: Mar. 20, 2018
The Author Email: Weimin Chen (wmchen@cqu.edu.cn)