[1] [1] Chai GB, Manikandan P. Low velocity impact response of fibre-metal laminates-a review. Compos Struct. 2014;107:363–81.10.1016/j.compstruct.2013.08.003

[2] [2] Zhao ZN, Han B, Li FH, Zhang R, Su PB, Yang M, Zhang Q, Zhang QC, Lu TJ. Enhanced bi-layer mosaic armor: experiments and simulation. Ceram Int. 2020;15:23854–66.10.1016/j.ceramint.2020.06.162

[3] [3] Ong CW, Boey CW, Hixson RS, Sinibaldi JO. Advanced layered personnel armor. Int J Impact Eng. 2011;5:369–83.10.1016/j.ijimpeng.2010.12.003

[4] [4] Zhang BW, Wang YW, Du SF, Yang ZK, Cheng HW, Fan QB. Influence of backing plate support conditions on armor ceramic protection efficiency. Materials. 2020;15:3427.10.3390/ma13153427

[5] [5] Rodriguez MM, Diaz AA, Aranda RJ, Diaz AJ, Loya JA. Experimental analysis for stabbing resistance of different aramid composite architectures. Compos Struct. 2019;208:525–34.10.1016/j.compstruct.2018.10.042

[6] [6] Li W, Xiong DS, Zhao XD, Sun LL, Liu J. Dynamic stab resistance of ultra-high molecular weight polyethylene fabric impregnated with shear thickening fluid. Mater Design. 2016;102:162–7.10.1016/j.matdes.2016.04.006

[7] [7] Chukov DI, Stepashkin AA, Maksimkin AV, Tcherdyntsev W, Kaloshkin SD, Kuskov KV, Bugakov VI. Investigation of structure, mechanical and tribological properties of short carbon fiber reinforced UHMWPE-matrix composites. Compos Part B. 2015;76:79–88.10.1016/j.compositesb.2015.02.019

[8] [8] Guo YX, Yuan MQ, Qian XM, Wei YC, Liu Y. Rapid prediction of polymer stab-resistance performance. Mater Design. 2020;192:108721.10.1016/j.matdes.2020.108721

[9] [9] Zhang CH, Rawatn P, Liu P, Zhu DJ. A new design and performance optimization of bio-inspired flexible protective equipment. Bioinspir Biomim. 2020;6:066003.10.1088/1748-3190/aba414

[10] [10] Prashant P, Zhu DJ, Barthelat F. Structural and mechanical properties of fish scales for the bio-inspired design of flexible body armors: a review. Acta Biomater. 2021;1231:41–67.

[11] [11] Johnson AA, Bingham GA, Majewski CE. The design and assessment of bio-inspired additive manufactured stab-resistant armour. Virtual Phys Prototy. 2018;13:49–57.10.1080/17452759.2017.1369438

[12] [12] Arrigo MI, Vilaca LMD, Fofonjka A, Srikanthan AN, Debry A, Milinkovitch MC. Phylogenetic mapping of scale nanostructure diversity in snakes. BMC Ecol Evol. 2019;19:91.

[13] [13] Chango AH, Vela PA. Evaluation of bio-Inspired scales on locomotion performance of snake-like robots. Robotica. 2019;8:1302–19.10.1017/S0263574718001522

[14] [14] Fu SH, Wei FN, Yin C, Yao LG, Wang YX. Biomimetic soft micro-swimmers: from actuation mechanisms to applications. Biomed Microdevices. 2021;1:6.10.1007/s10544-021-00546-3

[15] [15] Zheng L, Zhong YH, Gao YH, Li JY, Zhang ZH, Liu ZN, Ren LQ. Coupling effect of morphology and mechanical properties contributes to the tribological behaviors of snake scales. J Bionic Eng. 2018;3:481–93.10.1007/s42235-018-0039-3

[16] [16] Liu C, Chen YT, Zheng YH, Bo J, Yang CJ, Xu S, Zhang S. Wear resistance improvement of keeled structure and overlapped distribution of snake scales. J Bionic Eng. 2023;20:1121–31.10.1007/s42235-022-00300-2

[17] [17] Gong Z, Qian XM, Yuan MQ. Structural design of a 3D printed stab resistant body armor. Rapid Prototyp J. 2019;1:143–51.10.1108/RPJ-05-2017-0086

[18] [18] Xu JX, Fu CY, Fu QQ, Chen Y, Ma YJ, Feng X. Flexible arc-armor inspired by origami. Int J Mech Sci. 2021;201:106463.10.1016/j.ijmecsci.2021.106463

[19] [19] Guo YX, Yuan MQ, Qian XM. Bionic stab-resistant body armor based on triangular pyramid structure. Def Technol. 2021;3:792–9.10.1016/j.dt.2020.05.015

[20] [20] Li CS, Huang XC, Li Y, Yang NC, Shen ZH, Fan XH. Stab-resistance of UHMWPE fiber composites impregnated with thermoplastics. Polym Advan Technol. 2014;9:1014–9.10.1002/pat.3344

[21] [21] Zhang XY, Li TT, Sun F, Peng HK, Wang ZK, Lin JH, Lou CW. Stab/puncture resistance performance of needle punched nonwoven fabrics: effects of filament reinforcement and thermal bonding. Fiber Polym. 2022;8:2330–9.10.1007/s12221-022-3968-8

[22] [22] Murphy SV, Atala A. 3D bioprinting of tissues and organs. Nat Biotechnol. 2014;32:773–85.10.1038/nbt.2958

[23] [23] Chen ML, Hu N, Zhou C, Lin XK, Xie H, He Q. The hierarchical structure and mechanical performance of a natural nanocomposite material: the turtle shell. Colloid Surface A. 2017;520:97–104.10.1016/j.colsurfa.2017.01.063

[24] [24] Browning A, Ortiz C, Boyce MC. Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues. J Mech Behav Biomed. 2013;19:75–86.10.1016/j.jmbbm.2012.11.003

[25] [25] Rudykh S, Ortiz C, Boyce MC. Flexibility and protection by design: imbricated hybrid microstructures of bio-inspired armor. Soft Matter. 2015;11:2547–54.10.1039/C4SM02907K

[26] [26] Ghosh R, Ebrahimi H, Vaziri A. Contact kinematics of biomimetic scales. Appl Phys Lett. 2014;105:233701.10.1063/1.4903160

[27] [27] Shen DH, Zhang Q, Wang CJ, Wang XS, Tian MQ. Design and analysis of a snake-inspired crawling robot driven by alterable angle scales. IEEE Robot Autom Let. 2021;6:3744–51.10.1109/LRA.2021.3061379

[28] [28] Mao LZ, Zhou MJ, Yao L, Yu H, Yan XF, Shen Y, Chen WS, Ma PB, Ma Y, Zhang SL, Tan SC. Crocodile skin-inspired protective composite textiles with pattern-controllable soft-rigid unified structures. Adv Funct Mater. 2023;33:2213419.10.1002/adfm.202213419

[29] [29] Duro-Royo J, Zolotovsky K, Mogas-Soldevila L, Varshney S, Oxman N, Boyce MC, Ortiz C. MetaMesh: a hierarchical computational model for design and fabrication of biomimetic armored surfaces. Comput Aided Design. 2015;60:14–27.10.1016/j.cad.2014.05.005

[30] [30] Funk N, Vera M, Szewciw LJ, Barthelat F, Stoykovich MP, Vernerey FJ. Bioinspired fabrication and characterization of a synthetic fish skin for the protection of soft materials. ACS Appl Mater Interfaces. 2015;10:5972–83.10.1021/acsami.5b00258

[31] [31] Celik SB, Cobanoglu I. Comparative investigation of Shore, Schmidt, and Leeb hardness tests in the characterization of rock materials. Environ Earth Sci. 2019;78:554.10.1007/s12665-019-8567-7

[32] [32] Lu J, Zhang Y, Tao Y, Wang B, Cheng W, Jie G, Song L, Hu Y. Self-healable castor oil-based waterborne polyurethane/MXene film with outstanding electromagnetic interference shielding effectiveness and excellent shape memory performance. J Colloid Interf Sci. 2021;588:164–74.10.1016/j.jcis.2020.12.076

[33] [33] Jia PF, Zhu YL, Lu JY, Wang BY, Song L, Wang BB, Hu Y. Multifunctional fireproof electromagnetic shielding polyurethane films with thermal management performance. Chem Eng J. 2022;439:135673.10.1016/j.cej.2022.135673

[34] [34] Jia PF, Yu FH, Tao YJ, Sun PF, Xing WY, Jie GX, Hu Y, Wang BB. Multifunctional additive: a novel regulate strategy for improving mechanical property, aging life and fire safety of EVA composites. Chem Eng J. 2023;473:145283.10.1016/j.cej.2023.145283

[35] [35] Yin ZT, Lu JY, Hong NN, Cheng WH, Jia PF, Wang HJ, Hu WZ, Wang BB, Song L, Hu Y. Functionalizing Ti3C2Tx for enhancing fire resistance and reducing toxic gases of flexible polyurethane foam composites with reinforced mechanical properties. J Colloid Interf Sci. 2022;607:1300–12.10.1016/j.jcis.2021.09.027

[36] [36] Reddy KN, Gangadharan R, Ramji M. Experimental and numerical studies on the buckling and post-buckling behavior of single blade stiffened CFRP panels. Compos Struct. 2018;196:135–54.10.1016/j.compstruct.2018.05.015

[37] [37] Li W, Xiong DS, Liu J. Dynamic stab-resistance of ultra-high molecular weight polyethylene fabric impregnated with shear thickening fluid. Mater Design. 2016;102:162–7.10.1016/j.matdes.2016.04.006

[38] [38] Xia MM, Quan ZZ, Wang XL, Yu JY. Preparation and characterization of B4C particle coated composites for stab-resistance. Compos Struct. 2019;228:111370.10.1016/j.compstruct.2019.111370

[39] [39] Yan BB, Zhou M, Yu YY, Xu B, Cui L, Wang Q, Wang P. Orderly self-stacking a high-stability coating of MXene@Polydopamine hybrid onto textiles for multifunctional personal thermal management. Compos Part A. 2022;160:107038.10.1016/j.compositesa.2022.107038

[40] [40] Zhu DJ, Szewciw L, Vernerey F, Brathelat F. Puncture resistance of the scaled skin from striped bass: collective mechanisms and inspiration for new flexible armor designs. Sciverse Sci Direct. 2013;24:30–40.

[41] [41] Sherman VR, Quan HC, Yang W, Ritchie RO, Meyers MA. A comparative study of piscine defense: the scales of Arapaima gigas, Latimeria chalumnae and Atractosteus spatula. J Mech Behav Biomed. 2017;73:1–16.10.1016/j.jmbbm.2016.10.001

[42] [42] Yang W, Naleway SE, Porter MM, Meyers MA, Mckittrick J. The armored carapace of the boxfish. Acta Biomater. 2015;23:1–10.10.1016/j.actbio.2015.05.024

[43] [43] Yang W, Chen IH, Gludovatz B, Zimmermann EA, Ritchie RO, Meyers MA. Natural flexible dermal armor. Adv Mater. 2013;25:31–48.10.1002/adma.201202713

[44] [44] Zhao HY, Qiang YQ, Peng HK, Xing MF, Zhang XY, Lou CW. Enhancement of a novel sizing agent in mechanical properties and Stab/Puncture resistance of Kevlar fabrics. Fiber Polym. 2021;12:1–8.

[45] [45] Zhang XY, Li TT, Peng HK, Lou CW, Lin JH. Enhanced sandwich structure composite with shear thickening fluid and thermoplastic polyurethanes for High-performance stab resistance. Compos Struct. 2022;280:114930.10.1016/j.compstruct.2021.114930

[46] [46] Liu Q, Sun YX, Zhao JZ, Ma PB. Failure mechanism of weft-knitted insertion fabric/Surlyn resin flexible composite for stab-resistance. Text Res J. 2023;93:2473–89.10.1177/00405175221143544

[47] [47] Lin TR, Lin TA, Lin MC, Lin YY, Lou CW, Lin JH. Impact resistance of fiber reinforced sandwich-structured nonwoven composites: reinforcing effect of different fiber length. Mater Today Commun. 2020;24:101345.10.1016/j.mtcomm.2020.101345

[48] [48] Miao XH, Kong XY, Jiang GM. The experimental research on the stab resistance of warp-knitted spacer fabric. J Ind Text. 2013;43:281–301.10.1177/1528083712464256

[49] [49] Martini R, Barthelat F. Stretch-and-release fabrication, testing and optimization of a flexible ceramic armor inspired from fish scales. Bioinspir Biomim. 2016;11:066001.10.1088/1748-3190/11/6/066001

[50] [50] Martini R, Balit Y, Barthela F. A comparative study of bio-inspired protective scales using 3D printing and mechanical testing. Acta Biomater. 2017;55:360–72.10.1016/j.actbio.2017.03.025

[51] [51] Martini R, Barthelat F. Stability of hard plates on soft substrates and application to the design of bioinspired segmented armor. J Mech Phys Solids. 2016;92:195–209.10.1016/j.jmps.2016.04.009

[52] [52] Chintapalli RK, Mirkhalaf M, Dastjerdi AK, Barthelat F. Fabrication, testing and modeling of a new flexible armor inspired from natural fish scales and osteoderms. Bioinspir Biomim. 2014;3:036005.10.1088/1748-3182/9/3/036005

[53] [53] Liu Q, Wang LL, Luo M, Wu Q, Kang Y, Ma PB. Stab-resistance of flexible composite reinforced with warp-knitted fabric like scale structure at quasi-static loading. J Ind Text. 2022;51:7983S-7998S.10.1177/15280837211056987

[54] [54] Yan BB, Bao XM, Liao XT, Wang P, Zhou M, Yu YY, Yuan JG, Cui L, Wang Q. Sensitive micro-breathing sensing and highly-effective photothermal antibacterial cinnamomum camphora bark micro-structural cotton fabric via electrostatic self-assembly of MXene/HACC. ACS Appl Mater Inter. 2022;1:2132–45.10.1021/acsami.1c22740

[55] [55] Delavari K, Dabiryan H. Mathematical and numerical simulation of geometry and mechanical behavior of sandwich composites reinforced with 1×1-Rib-Gaiting weft-knitted spacer fabric; compressional behavior. Compos Struct. 2021;268:113952.10.1016/j.compstruct.2021.113952