Bulletin of the Chinese Ceramic Society, Volume. 43, Issue 12, 4553(2024)

Comparative Study on Effect of Rheological Properties on Stability of Ceramic Slurry

BAO Zhilei1... YU Huan2,* and JIANG Chao3 |Show fewer author(s)
Author Affiliations
  • 1School of Materials, Jiangxi Arts & Ceramics Technology Institute, Jingdezhen 333400, China
  • 2Faculty of Humanities, Jingdezhen University, Jingdezhen 333400, China
  • 3School of Materials Science and Engineering, Jingdezhen Ceramic University, Jingdezhen 333403, China
  • show less
    References(38)

    [1] [1] MORENO R. Colloidal processing of ceramics and composites[J]. Advances in Applied Ceramics, 2012, 111(5/6): 246-253.

    [2] [2] LEWIS J A. Colloidal processing of ceramics[J]. Journal of the American Ceramic Society, 2000, 83(10): 2341-2359.

    [3] [3] ZENG Y P, JIANG D L, GREIL P. Tape casting of aqueous Al2O3 slurries[J]. Journal of the European Ceramic Society, 2000, 20(11): 1691-1697.

    [4] [4] JAVIER SNCHEZ-HERENCIA A, HERNNDEZ N, MORENO R. Rheological behavior and slip casting of Al2O3-Ni aqueous suspensions[J]. Journal of the American Ceramic Society, 2006, 89(6): 1890-1896.

    [5] [5] ZHANG K Q, XIE C, WANG G, et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing[J]. Ceramics International, 2019, 45(1): 203-208.

    [6] [6] SINGH B P, MENCHAVEZ R, TAKAI C K, et al. Stability of dispersions of colloidal alumina particles in aqueous suspensions[J]. Journal of Colloid and Interface Science, 2005, 291(1): 181-186.

    [7] [7] KAYES J B. Pharmaceutical suspensions: relation between Zeta potential, sedimentation volume and suspension stability[J]. Journal of Pharmacy and Pharmacology, 2011, 29(1): 199-204.

    [8] [8] VINCENT B. The effect of adsorbed polymers on dispersion stability[J]. Advances in Colloid and Interface Science, 1974, 4(2/3): 193-277.

    [9] [9] SOMTON K, LAORATANAKUL P, MCCUISTON R. Effect of binder content on the slip rheology and green properties of slip cast alumina[J]. Key Engineering Materials, 2019, 798: 177-181.

    [10] [10] LOEBBECKE B, KNITTER R, HAUELT J. Rheological properties of alumina feedstocks for the low-pressure injection moulding process[J]. Journal of the European Ceramic Society, 2009, 29(9): 1595-1602.

    [11] [11] OZKAN B, SAMENI F, KARMEL S, et al. Binder stabilization and rheology optimization for vat-photopolymerization 3D printing of silica-based ceramic mixtures[J]. Journal of the European Ceramic Society, 2023, 43(4): 1649-1662.

    [12] [12] WU L N, HUANG Y D, WANG Z J, et al. Interaction and dispersion stability of alumina suspension with PAA in N, N′-dimethylformamide[J]. Journal of the European Ceramic Society, 2010, 30(6): 1327-1333.

    [13] [13] WILLENBACHER N, GEORGIEVA K. Rheology of disperse systems[J]. Nature, 1957, 180: 957-959.

    [14] [14] MEWIS J. Rheology of suspensions[M]//Rheology. Boston, MA: Springer US, 1980: 149-168.

    [15] [15] TADROS T. Viscoelastic properties of sterically stabilised emulsions and their stability[J]. Advances in Colloid and Interface Science, 2015, 222: 692-708.

    [16] [16] GRESHAM R. Viscosity: the resistance to flow[J]. Tribology & Lubrication Technology, 2004, 60(12): 28-30.

    [17] [17] DE NONI A, GARCIA D E, HOTZA D. A modified model for the viscosity of ceramic suspensions[J]. Ceramics International, 2002, 28(7): 731-735.

    [18] [18] BINGHAM E C. Viscosity and fluidity: a summary of results. II[J]. Physical Review, 1913, 1(2): 96-123.

    [19] [19] KAMANI K, DONLEY G J, ROGERS S A. Unification of the rheological physics of yield stress fluids[J]. Physical Review Letters, 2021, 126(21): 218002.

    [20] [20] ZHU J C, CAI L H. All-aqueous printing of viscoelastic droplets in yield-stress fluids[J]. Acta Biomaterialia, 2023, 165: 60-71.

    [21] [21] KULIK V M, BOIKO A V, BARDAKHANOV S P, et al. Viscoelastic properties of silicone rubber with admixture of SiO2 nanoparticles[J]. Materials Science and Engineering: A, 2011, 528(18): 5729-5732.

    [22] [22] HUANG N. Rheological characterization of pharmaceutical and cosmetic formulations for cutaneous applications[J]. Current Pharmaceutical Design, 2019, 25(21): 2349-2363.

    [23] [23] BAO Z L, ZHU H Q, WANG Y Q, et al. A new method for judging and predicting the stability of ceramic suspensions by rheological tests[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 685: 133316.

    [24] [24] TADROS T F. Correlation of viscoelastic properties of stable and flocculated suspensions with their interparticle interactions[J]. Advances in Colloid and Interface Science, 1996, 68: 97-200.

    [25] [25] CHEN J, SPEAR S K, HUDDLESTON J G, et al. Polyethylene glycol and solutions of polyethylene glycol as green reaction media[J]. Green Chemistry, 2005, 7(2): 64-82.

    [26] [26] MARK J E, FLORY P J. The configuration of the polyoxyethylene chain[J]. Journal of the American Chemical Society, 1965, 87(7): 1415-1423.

    [27] [27] SONG S I, KIM B C. Characteristic rheological features of PVA solutions in water-containing solvents with different hydration states[J]. Polymer, 2004, 45(7): 2381-2386.

    [28] [28] WANG Y Q, YANG W J, WANG Q K, et al. The rheological performance of aqueous ceramic ink described based on the modified Windhab model[J]. Materials Research Express, 2020, 7(7): 075103.

    [29] [29] CHHABRA R P, RICHARDSON J F. Non-Newtonian flow and applied rheology: engineering applications[M]. Amsterdam: Elsevier Science, 2011.

    [30] [30] MARCO P, LABANDA J, LLORENS J. The effects of some polyelectrolyte chemical compositions on the rheological behaviour of Kaolin suspensions[J]. Powder Technology, 2004, 148(1): 43-47.

    [31] [31] PUTZ A M V, BURGHELEA T I, FRIGAARD I A, et al. Settling of an isolated spherical particle in a yield stress shear thinning fluid[J]. Physics of Fluids, 2008, 20(3): 033102.

    [32] [32] BAO Z L, HUAN D M, YU H, et al. A model for predicting the stability of ceramic suspensions[J]. Ceramics International, 2024, 50(1): 1990-1999.

    [33] [33] THOMBARE N, JHA U, MISHRA S, et al. Guar gum as a promising starting material for diverse applications: a review[J]. International Journal of Biological Macromolecules, 2016, 88: 361-372.

    [34] [34] BARTHLMY J F, GIRAUD A, SANAHUJA J, et al. Effective properties of ageing linear viscoelastic media with spheroidal inhomogeneities[J]. International Journal of Engineering Science, 2019, 144: 103104.

    [35] [35] MALHOTRA S, SHARMA M M. Settling of spherical particles in unbounded and confined surfactant-based shear thinning viscoelastic fluids: an experimental study[J]. Chemical Engineering Science, 2012, 84: 646-655.

    [36] [36] ARNIPALLY S K, ERGUN K. Effect of elastic properties of the fluids on the particle settling velocity[C]//Proceedings of ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, June 25-30, 2017.

    [37] [37] VAN DEN BRULE B H A A, GHEISSARY G. Effects of fluid elasticity on the static and dynamic settling of a spherical particle[J]. Journal of Non-Newtonian Fluid Mechanics, 1993, 49(1): 123-132.

    [38] [38] WALTERS K, TANNER R. The motion of a sphere through an elastic fluid[J]. Transport Processes in Bubbles, Drops, and Particles, 1992, 1: 992.

    Tools

    Get Citation

    Copy Citation Text

    BAO Zhilei, YU Huan, JIANG Chao. Comparative Study on Effect of Rheological Properties on Stability of Ceramic Slurry[J]. Bulletin of the Chinese Ceramic Society, 2024, 43(12): 4553

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: May. 31, 2024

    Accepted: Jan. 10, 2025

    Published Online: Jan. 10, 2025

    The Author Email: Huan YU (15961030@qq.com)

    DOI:

    CSTR:32186.14.

    Topics