[3] W WOO, G B AN, E J KINGSTON et al. Through-thickness distributions of residual stresses in two extreme heat-input thick welds: a neutron diffraction, contour method and deep hole drilling study. Acta Materialia, 61, 3564-3574(2013).

[4] J BALAKRISHNAN, A N VASILEIOU, J A FRANCIS et al. Residual stress distributions in arc, laser and electron-beam welds in 30 mm thick SA508 steel: a cross-process comparison. International Journal of Pressure Vessels and Piping, 162, 59-70(2018).

[5] J U PARK, G AN, W C WOO et al. Residual stress measurement in an extra thick multi-pass weld using initial stress integrated inherent strain method. Marine Structures, 39, 424-437(2014).

[6] Y UEDA, T YAMAKAWA. Analysis of thermal elastic-plastic stress and strain during welding by finite element method. Japan Welding Society Transactions, 2, 90-100(1971).

[7] W C JIANG, W CHEN, W WOO et al. Effects of low-temperature transformation and transformation-induced plasticity on weld residual stresses: numerical study and neutron diffraction measurement. Materials & Design, 147, 65-79(2018).

[8] J U PARK, G AN, W WOO. The effect of initial stress induced during the steel manufacturing process on the welding residual stress in multi-pass butt welding. International Journal of Naval Architecture and Ocean Engineering, 10, 129-140(2018).

[9] M J XU, H LU, C YU et al. Finite element simulation of butt welded 2·25Cr–1·6W steel pipe incorporating bainite phase transformation. Science and Technology of Welding and Joining, 18, 184-190(2013).

[10] W C JIANG, W WOO, Y WAN et al. Evaluation of through-thickness residual stresses by neutron diffraction and finite-element method in thick weld plates. Journal of Pressure Vessel Technology, 139, 031401(2017).

[11] H MURAKAWA, N S MA, H HUANG. Iterative substructure method employing concept of inherent strain for large-scale welding problems. Welding in the World, 59, 53-63(2015).

[12] K IKUSHIMA, M SHIBAHARA. Prediction of residual stresses in multi-pass welded joint using Idealized Explicit FEM accelerated by a GPU. Computational Materials Science, 93, 62-67(2014).

[14] A L GURSON. Continuum theory of ductile rupture by void nucleation and growth: part 1-yield criteria and flow rules for porous ductile media. Journal of Engineering Materials Technology, 99, 297-300(1977).

[15] V TVERGAARD, A NEEDLEMAN. Acta Metallurgical, 32, 157-169(1984).

[16] M RAKIN, B MEDJO, N GUBELJAK et al. Micromechanical assessment of mismatch effects on fracture of high-strength low alloyed steel welded joints. Engineering Fracture Mechanics, 109, 221-235(2013).

[17] C F GUZMÁN, E I S FLORES, A M HABRAKEN. Damage characterization in a ferritic steel sheet: experimental tests, parameter identification and numerical modeling. International Journal of Solids and Structures, 155, 109-122(2018).

[18] V D NGUYEN, T PARDOEN, L NOELS. A nonlocal approach of ductile failure incorporating void growth, internal necking, and shear dominated coalescence mechanisms. Journal of the Mechanics and Physics of Solids, 137, 103891(2020).

[19] M MARTELEUR, J LECLERC, M S COLLA et al. Ductile fracture of high strength steels with morphological anisotropy, Part I: characterization, testing, and void nucleation law. Engineering Fracture Mechanics, 244, 107569(2021).

[20] X B REN, Z L ZHANG, B NYHUS. Effect of residual stresses on ductile crack growth resistance. Engineering Fracture Mechanics, 77, 1325-1337(2010).

[23] E KEEHAN, L KARLSSON, H K D H BHADESHIA et al. Three-dimensional analysis of coalesced Bainite using focused ion beam tomography. Materials Characterization, 59, 877-882(2008).