[1] [1] Bely P Y. The Design and Construction of Large Optical Telescopes [M]. New York: Springer, 2003.

[2] [2] Liu Xiangyi, Zhang Jingxu, Wu Xiaoxia, et al. Design and principle of the primary mirror thermal control system for large ground-based telescope [J]. Laser and Infrared, 2014, 44(8): 841-845. (in Chinese)

[3] [3] Lowne C M. An investigation of the effects of mirror temperature upon telescope seeing [J]. Astron Soc Pacific, 1979, 188: 249-259.

[4] [4] Johnson D C. Boundary layer control for large optics [C]//SPIE, 1989, 1047: 174-183.

[5] [5] Barr L D, Fox J, Poczulp G A, et al. Seeing studies on a 1.8 m mirror [C]//SPIE, 1990, 1236: 492-506.

[7] [7] Anderson J, Dick E, Degrez G, et al. Computational Fluid Dynamics: An Introduction [M]. New York: Springer, 2009.

[8] [8] Liu Yangyi, Gu Naiting, Rao Changhui. Quantitative evaluation on internal seeing induced by heat-stop of solar telescope [J]. Optics Express, 2015, 23(15): 19980-19995.

[9] [9] Gladstone L H, Dale T P. Researches on the refraction, dispersion and sensitiveness of liquids [J]. Phil Trans Royal Soc, 1863, 153: 317-343.

[10] [10] Tan Yufeng, Wang Jihong, Ren Ge, et al. Equivalent analytical calculation of the temperature field of the lightweighted primary mirror for large-aperture telescope [J]. High Power Laser and Particle Beams, 2017, 29(6): 061001. (in Chinese)

[11] [11] Zhang Kuo, Chen Fei, Li Ruolan, et al. Analysis on thermal performance of output window in high power CO2 laser [J]. Infrared and Laser Engineering, 2017, 46(2): 0202005. (in Chinese)

[12] [12] Sun Yunqiang. Study on the thermal blooming of beam propagation in the inner channel[D]. Changsha: National University of Defense Technology, 2011. (in Chinese)

[13] [13] Ma Haojun, Wang Guolin, Chen Dejiang, et al. Experimental study on aero-optical transmission effect of infrared window in aerothermal environment [J]. Infrared and Laser Engineering, 2017, 46(9): 0904001. (in Chinese)