[1] [1] ORTIZ J, AGUADO A, AGULL L, et al. Influence of environmental temperatures on the concrete compressive strength: Simulation of hot and cold weather conditions［J］. Cem Concr Res, 2005, 35(10): 1970-1979.

[2] [2] DU M Y, JIN X Y, YE H L, et al. A coupled hygro-thermal model of early-age concrete based on micro-pore structure evolution［J］. Constr Build Mater, 2016, 111: 689-698.

[3] [3] LI C, WU M X, CHEN Q, et al. Chemical and mineralogical alterations of concrete subjected to chemical attacks in complex underground tunnel environments during 20-36 years［J］. Cem Concr Comp, 2018, 86: 139-159.

[4] [4] DAVILA J M, SARMIENTO A M, FORTES J C, et al. Determination of the extreme reduction of concrete strength due to acid mine drainage by laboratory tests on specimens located in a real environment［J］. Constr Build Mater, 2021, 269: 121817.

[5] [5] KJELLSEN K O, DETWILER R J. Reaction kinetics of Portland cement mortars hydrated at different temperatures［J］. Cem Concr Res, 1992, 22(1): 112-120.

[6] [6] KHATIB J M, MANGAT P S. Influence of high-temperature and low-humidity curing on chloride penetration in blended cement concrete［J］. Cem Concr Res, 2002, 32(11): 1743-1753.

[7] [7] GERSTIG M, WADS L. A method based on isothermal calorimetry to quantify the influence of moisture on the hydration rate of young cement pastes［J］. Cem Concr Res, 2010, 40(6): 867-874.

[8] [8] SHOUKRY S N, WILLIAM G W, DOWNIE B, et al. Effect of moisture and temperature on the mechanical properties of concrete［J］. Constr Build Mater, 2011, 25(2): 688-696.

[9] [9] XU L L, WANG P M, ZHANG G F. Formation of ettringite in Portland cement/calcium aluminate cement/calcium sulfate ternary system hydrates at lower temperatures［J］. Constr Build Mater, 2012, 31: 347-352.

[10] [10] LIU Z Z, SHA A M, HU L Q, et al. Kinetic and thermodynamic modeling of Portland cement hydration at low temperatures［J］. Chem Pap, 2017, 71(4): 741-751.

[11] [11] MI Z X, HU Y, LI Q B, et al. Effect of curing humidity on the fracture properties of concrete［J］. Constr Build Mater, 2018, 169: 403-413.

[12] [12] DAVILA J M, SARMIENTO A M, FORTES J C, et al. Determination of the extreme reduction of concrete strength due to acid mine drainage by laboratory tests on specimens located in a real environment［J］. Constr Build Mater, 2021, 269: 121817.

[14] [14] GOLEWSKI G L. An assessment of microcracks in the interfacial transition zone of durable concrete composites with fly ash additives［J］. Compos Struct, 2018, 200: 515-520.

[17] [17] LI L, ZHA Y. Mapping relative humidity, average and extreme temperature in hot summer over China［J］. Sci Total Environ, 2018, 615: 875-881.

[18] [18] SHI F Z, ZHAO C Y, ZHOU X, et al. Spatial variations of climate-driven trends of water vapor pressure and relative humidity in northwest China［J］. Asia-Pacific J Atmos Sci, 2019, 55(2): 221-231.

[19] [19] CHEN D T, LIU W J, HUANG F R, et al. Spatial-temporal characteristics and influencing factors of relative humidity in arid region of Northwest China during 1966-2017［J］. J Arid Land, 2020, 12(3): 397-412.

[20] [20] CONSTANTINIDES G, ULM F J. The nanogranular nature of C-S-H［J］. J Mech Phys Solids, 2007, 55(1): 64-90.

[21] [21] WANG M, XIE Y J, LONG G C, et al. Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes［J］. Constr Build Mater, 2019, 221: 151-162.

[23] [23] JENNINGS H M, THOMAS J J, GEVRENOV J S, et al. A multi-technique investigation of the nanoporosity of cement paste［J］. Cem Concr Res, 2007, 37(3): 329-336.

[24] [24] HU C L, LI Z J. A review on the mechanical properties of cement-based materials measured by nanoindentation［J］. Constr Build Mater, 2015, 90: 80-90.

[25] [25] WU K, SHI H S, XU L L, et al. Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties［J］. Cem Concr Res, 2016, 79: 243-256.