[1] [1] NGUYEN T T T, KUNDAN A, WAYNER P C, et al.. The effect of an ideal fluid mixture on the evaporator performance of a heat pipe in microgravity ［J］. International Journal of Heat and Mass Transfer, 2016, 95: 1129-1129.

[2] [2] ALMSATER S, SAMAN W, BRUNO, F. Performance enhancement of high temperature latent heat thermal storage systems using heat pipes with and without fins for concentrating solar thermal power plants ［J］. Renewable Energy, 2016, 89: 36-50.

[3] [3] NIKOLAYEV V S. Effect of tube heat conduction on the single branch pulsating heat pipe start-up ［J］. International Journal of Heat and Mass Transfer, 2016, 95: 477-487.

[4] [4] LI X B, LI M J, LI M, et al.. Forming method of micro heat pipe with compound structure of sintered wick on grooved substrate ［J］. Heat and Mass Transfer, 2016, 52(3): 581-593.

[5] [5] CALAUTIT J K, O'CONNOR D, HUGHES B R. A natural ventilation wind tower with heat pipe heat recovery for cold climates ［J］. Renewable Energy, 2016, 87: 1088-1104.

[6] [6] CHEN S Y, LI P F, XUE ZH H, et al.. Recent Progress of CAAA heat pipes for military-civil application ［J］. Dual Use Technologies & Products, 2014, 05:56-58. (in Chinese)

[7] [7] CUI K H, XIN G M, CHENG L, et al.. Effective thermal conductivity of loop heat pipe wicks ［J］. Journal of Engineering Thermophysics, 2010,31(9):1543-1546. (in Chinese)

[8] [8] GOU Y J. An Investigation on Heat Transfer Augmentation of Large Power LED Heat Pipe Radiators ［D］.Beijing:Beijing University of Technology,2014. (in Chinese)

[9] [9] YU Y. Temperature measurement method selection strategy ［J］. Equipment Manufacturing Technology, 2015,9:79-81. (in Chinese)

[10] [10] YANG M, WANG J SH. Software of temperature-measuring and data-processing in thermal environment experiment［J］.Opt. Precision Eng., 2000,8(6):544-546. (in Chinese)

[11] [11] LI Y H, SUN X G, YUAN G B. Accurate measuring temperature with infrared thermal imager［J］.Opt. Precision Eng., 2007,15(9): 1336-1341. (in Chinese)

[12] [12] JUN Y. Non-contact temperature measuring with infrared ［J］.Laser & Infrared,1978,03:22-29. (in Chinese)

[13] [13] LU X Y, HUA Z ZH, LIU M J, et al..Measurement and snalysis on yhermal vharacteristics of high power LED based on heat pipe ［J］. Journal of Optoelectronics.Laser, 2009,20(1):5-8. (in Chinese)

[14] [14] YU L, HAN Y, CAN Y L, et al.. Experimental investigation on flat-plate heat pipe in cooling electronic equipment ［J］. Journal of Nanjing University of Aeronautics & Astronautics, 2008,40(5):627-631. (in Chinese)

[15] [15] HSIEH J C, HUANG H J, SHEN S C. Experimental study of micro rectangular groove structure covered with multi mesh layers on performance of flat plate heat pipe for LED lighting module［J］. Microelectronics Reliability, 2012,52(6): 1071-1079.

[16] [16] DEDE E M. Optimization and design of a multipass branching microchannel heat sink for electronics cooling ［J］. Journal of Electronic Packaging, 2012, 134(4): 041001-1-10.

[17] [17] WANG P, MCCLUSKEY P, BAR-COHEN A. Two-phase liquid cooling for thermal management of IGBT power electronic module ［J］. Journal of Electronic Packaging, 2013, 135(2): 021001-1-11.