Optics and Precision Engineering, Volume. 22, Issue 12, 3324(2014)

Micro cutting mechanism of abrasive flow precision machining

DING Jin-fu*... LIU Run-zhi, ZHANG Ke-hua and E Shi-ju |Show fewer author(s)
Author Affiliations
  • [in Chinese]
  • show less
    References(15)

    [3] [3] JI SH M, TANG B, TAN D P, et al.. Structured surface softness abrasive flow precision finish machining and its abrasive flow dynamic numerical analysis [J]. Chinese Journal of Mechanical Engineering, 2010, 46(15): 178-184. (in Chinese)

    [4] [4] JI SH M, LI CH, TAN D P, et al.. Study on machinability of softness abrasive flow based on preston equation [J]. Chinese Journal of Mechanical Engineering, 2011, 47(17): 156-163. (in Chinese)

    [5] [5] RAVI SANKAR M, JAIN V K, RAMKUMA J, et al.. Rheological characterization of styrene-butadiene based medium and its finishing performance using rotational abrasive flow finishing process[J]. International Journal of Machine Tools and Manufacture, 2011, 51: 947-957.

    [6] [6] RHOADES L J. Abrasive flow machining: a case study [J]. Journal of Material Processing Technology, 1991, 28: 107-116.

    [7] [7] LOVELESS T R, WILLIAMS R E, RAJURKAR K P. A study of the effects of abrasive flow finishing on various machined surfaces[J]. Journal of Material Processing Technology, 1994, 47: 133-151.

    [8] [8] WILLIAMS R E, RAJURKAR K P. Stochastic modeling and analysis of abrasive flow machining[J]. Journal of Engineering for Industry(Transactions of the ASME), 1992, 114: 74-81.

    [9] [9] WILLIAMS R E. Acoustic emission characteristics of abrasive flow machining [J]. Transactions of the ASME120, 1998,264-271.

    [11] [11] DING J F, ZHANG K H, XU Y CH, et al.. Abrasive flow homogenization polishing method and processing experiment for cycloidal pump Inner rotor [J]. Journal of Drainage and Irrigation Machinery Engineering, 2013, 31(7): 45-53.(in Chinese)

    [12] [12] HUANG W X, LI J M, XIAO Z Y. Engineering Fluid Mechanics[M]. Beijing: Chemical Industry Press, 2011. (in Chinese)

    [13] [13] DONG ZH G, YA G, LI Y Z. Analysis of wall sliding characteristics about abrasive flow carrier in pipe [J]. Journal of Taiyuan University of Technology,2011, 42(2): 160-163.(in Chinese)

    [14] [14] DONG ZH G, YA G, SONG G ZH, et al.. Influence of viscoelasticity on grinding effect in abrasive flow machining [J]. Diamond & Abrasives Engineering, 2010, 30(6): 82-85. (in Chinese)

    [15] [15] BHARAT BHUSHAN, GE SH R. Introduction of Tribology[M]. Beijing: Machinery Industry Press, 2007. (in Chinese)

    CLP Journals

    [1] LI Jun-ye, HU Jing-lei, DONG Kun, WANG Zhen, ZHOU Li-bin, ZHANG Xin-ming. Technological parameter optimization and quality effects on solid-liquid phase abrasive flow polishing[J]. Optics and Precision Engineering, 2017, 25(6): 1534

    [2] LI Jun-ye, WEI Li-li, YIN Yan-lu, WU Shao-ju, ZHOU Li-bin, ZHANG Xin-ming. Analysis to erosive wear of abrasive flow polishing servo valve core nozzle[J]. Optics and Precision Engineering, 2017, 25(7): 1857

    Tools

    Get Citation

    Copy Citation Text

    DING Jin-fu, LIU Run-zhi, ZHANG Ke-hua, E Shi-ju. Micro cutting mechanism of abrasive flow precision machining[J]. Optics and Precision Engineering, 2014, 22(12): 3324

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Apr. 10, 2014

    Accepted: --

    Published Online: Jan. 13, 2015

    The Author Email: Jin-fu DING (zsddif@zjnu.cn)

    DOI:10.3788/ope.20142212.3324

    Topics