[1] Pei X G, Fan W Y. Effects of amorphous poly alpha olefin (APAO) and polyphosphoric acid (PPA) on the rheological properties, compatibility and stability of asphalt binder[J]. Materials (Basel, Switzerland), 14, 2458(2021).

[2] Fatemi S, Saadatjoo S A, Babagoli R et al. Rheological evaluation of asphalt binder modified by amorphous poly alpha olefin (APAO)[J]. Construction and Building Materials, 314, 125371(2022).

[3] Gnanasekaran D, Thomas P. Enhanced dielectric and thermal performance of bio-polyamide polyhedral oligomeric SilseSquioxane (PA-POSS) nanocomposites[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 28, 398-405(2021).

[4] Ohtsuka K, Kimura H, Matsumoto A et al. Preparation and properties of cured diallyl phthalate resin modified with dimeric acid polyamide derivatives[J]. Journal of Applied Polymer Science, 126, E218-E224(2012).

[5] Yamasaki S, Fujita T, Nishikawa S et al. Dual wall heat-shrinkable tubing with hot-melt inner layer[J]. SEI Technical Review, 85-90(2018).

[6] Richards J A, Dieck R L. Radiation cross-linking of polyamides[P].

[7] RAO Xiaobo. Effect of absorbed dose on structure and properties of dimeric acid polyamide[J]. Journal of Radiation Research and Radiation Processing, 40, 020204(2022).

[8] GAO Junna, ZHAO Kang, CUI Guoshi et al. Radiation crosslinking and performance of ultra-high molecular weight polyethylene microporous membrane under different temperatures[J]. Journal of Radiation Research and Radiation Processing, 39, 030203(2021).

[11] Akhavan A, Khoylou F, Sheikh N et al. Effect of electron beam irradiation on the thermal, mechanical and aging behaviors of polyethylene/carbon black nanocomposite[J]. Radiation Physics and Chemistry, 187, 109582(2021).

[12] Wang H T, Jiang H Q, Shen R F et al. Electron-beam radiation effects on the structure and properties of polypropylene at low dose rates[J]. Nuclear Science and Techniques, 29, 87(2018).

[13] Wang J, Li J B, Wang X F et al. Synthesis and properties of UV-curable polyester acrylate resins from biodegradable poly(l-lactide) and poly(ε-caprolactone)[J]. Reactive and Functional Polymers, 155, 104695(2020).

[14] LIN Qiaoqiao, JIANG Jiali, XU Shuangxi et al. Crystallization and melting behaviors of low melting point polyamide[J]. Synthetic Fiber in China, 45, 1-5(2016).

[15] Kremser T, Susoff M, Roth S et al. Degradation studies of a commercial radiation-resistant polypropylene sterilized by gamma and electron beam technology before and after subsequent accelerated aging cycles[J]. Journal of Applied Polymer Science, 137, 48436(2020).

[16] Drawert M, Griebsch E, Imoehl W. Polyamide melt adhesives[P].

[17] Horst R, Wolf B A. Calculation of the phase separation behavior of sheared polymer blends[J]. Macromolecules, 25, 5291-5296(1992).

[18] Wei C. Experimental investigation on the influence of temperature on the hysteresis behavior of magnetorheological gel by employing a large-amplitude-oscillation-shear test method[J]. RSC Advances, 12, 2416-2424(2022).

[19] ZHAI Yuanming, YANG Wei, WANG Yu et al. Effects of molecular structures of LLDPE on the dynamic rheological behaviors[J]. Polymer Materials Science & Engineering, 26, 88-91(2010).

[20] Sousa J C, Costa A R M, Lima J C et al. Polycaprolactone (PCL)/alumina and PCL/niobium pentoxide composites: rheology, crystallization, and mechanical properties[J]. Polymer Composites, 41, 1265-1276(2020).

[21] Wu Q, Schümmer P. Prediction of the non-linear rheological properties of polymer solutions by means of the Rouse-Zimm model with slippage[J]. Rheologica Acta, 29, 23-30(1990).

[22] Lu Y Y, An L J, Wang S Q et al. Molecular mechanisms for conformational and rheological responses of entangled polymer melts to startup shear[J]. Macromolecules, 48, 4164-4173(2015).

[23] Huang B, Li X H, Fu C et al. Study rheological behavior of polymer solution in different-medium-injection-tools[J]. Polymers, 11, 319(2019).