[1] [1] FAN G Q, WANG M, DANG J, et al. A novel recycling approach for efficient extraction of titanium from high-titanium-bearing blast furnace slag[J]. Waste Management, 2020, 120: 626-634.

[3] [3] CHU G R, WANG L, LIU W Z, et al. Indirect mineral carbonation of chlorinated tailing derived from Ti-bearing blast-furnace slag coupled with simultaneous dechlorination and recovery of multiple value-added products[J]. Greenhouse Gases: Science and Technology, 2019, 9(1): 52-66.

[14] [14] LI L, JIANG T, CHEN B J, et al. Recycling of Ti-extraction blast furnace slag: preparation of calcium silicate board with high slag content by steam pressure curing[J]. Process Safety and Environmental Protection, 2022, 158: 432-444.

[15] [15] NOCUAN＇G1-WCZELIK W. Effect of some inorganic admixtures on the formation and properties of calcium silicate hydrates produced in hydrothermal conditions[J]. Cement and Concrete Research, 1997, 27(1): 83-92.

[17] [17] LIU F, CAO J X, ZHU B. Effect of anion impurity on preparing xonotlite whiskers via hydrothermal synthesis[J]. Advanced Materials Research, 2011, 148/149: 1755-1758.

[18] [18] ZHAN J Y, YANG F H, LI W M, et al. Hydration characteristics and humidity control performance of calcium silicate board prepared from mine tailing and diatomite[J]. Journal of Wuhan University of Technology-Mater Sci Ed, 2020, 35(1): 147-154.

[24] [24] MARINESCU M, BROUWERS J. Chloride binding related to hydration products Part I: Ordinary Portland Cement［C］//ANDRADE C, GULIKERS J. Advances in Modeling Concrete Service Life. Dordrecht: Springer, 2012: 125-131.

[25] [25] ZHOU Y, HOU D S, JIANG J Y, et al. Chloride ions transport and adsorption in the nano-pores of silicate calcium hydrate: experimental and molecular dynamics studies[J]. Construction and Building Materials, 2016, 126: 991-1001.

[26] [26] ZHU Q, JIANG L H, CHEN Y, et al. Effect of chloride salt type on chloride binding behavior of concrete[J]. Construction and Building Materials, 2012, 37: 512-517.