[1] [1] COSTA L, VILAR R. Laser powder deposition ［J］. Rapid Prototyping J., 2009,15(4):264-279.

[2] [2] CECILIA ARAKAKI, ALI GHADERI, et al.. Air mass balance for mass flow rate calculation in pneumatic conveying ［J］. Powder Technology, 2010,202:62-70.

[3] [3] LIANG C, CHEN X P, ZHAO C S, et al.. Flow characteristics and dynamic behavior of dense-phase pneumatic conveying conveying of pulverized coal with variable moisture content at high pressure ［J］. Korean J. Chem. Eng., 2009,26(3):867-873.

[4] [4] LIU Z M, DU B, ZHAO W L, et al.. Effect of characterization of powder on particle velocity in dense-phase pneumatic conveying ［J］. Journal of Physics: Conference Series, 2009, 147 012068.

[5] [5] SATORU WATANO. Mechanism and control of electrification in pneumatic conveying of powders ［J］. Chemical Engineering Science, 2006,61(7):2271-2278.

[6] [6] RCK M, MORGENEYER M, SCHWEDES J, et al.. Steady state flow of cohesive and non-cohesive powders, Investigations in experiment and simulation ［J］. Granular Matter., 2008,10:285-293.

[7] [7] TAKANO T, TOMIKAWA Y. Excitation of a progressive wave in a lossy ultrasonic transmission line and an application to a powder-feeding device ［J］. Smart Mater Struct., 1998,7:417-421.

[8] [8] LU X S, YANG S F, EVANS J R G. Dose uniformity of fine powders in ultrasonic microfeeding ［J］. Powder Technology, 2007,175:63-72.

[9] [9] LU X S, YANG S F, EVANS J R G. Microfeeding with different ultrasonic nozzle designs ［J］. Ultrasonics, 2009,49(6-7):514-521.

[10] [10] KHNEA U, FRITSCHING U. Dosage of highly disperse powders by ultrasound agitated tube modules ［J］. Powder Technology, 2005,155:117-124.

[11] [11] MRACEK M, WALLASCHEK J. A system for powder transport based on piezoelectrically excited ultrasonic progressive waves ［J］. Materials Chemistry and Physics, 2005,90:378-380.

[12] [12] JIANG B, LIU X L, YANG ZH G, et al.. Study on vertical drive ultrasonic feeder ［J］. Opt. Precision Eng., 2008,16(6):1083-1086. ( in Chinese)

[13] [13] HE Q ,WANG H X. Standing wave type piezoelectric multi-vibrators material transmission device ［P］. CN: 0610046279.2, 2006-09-06. (in Chinese)

[14] [14] MATSUSAKA S, URAKAWA M, MASUDA H. Micro-feeding of fine powders using a capillary tube with ultrasonic vibration ［J］. Advanced Powder Technology, 1995,6(4):283-293.

[15] [15] LI X CH, CHOI H, YANG Y. Micro rapid prototyping system for micro components ［J］. Thim Solid Films, 2002,420-421: 515-523.

[16] [16] YANG SH F, EVANS J R G. A multi-component powder dispensing system for three dimensional functional gradients ［J］. Materials Science and Engineering:A, 2004(379):351–359.

[17] [17] ZHANG W Y, HOU L Y. Method and device interfering fluidic flow and their applications ［P］. CN: 03152948.8,2004-08-25. (in Chinese)

[18] [18] ZHANG W Y, HOU L Y. Scientific and technological problems of digitalization of microfluids(Part I): concepts, methods and results ［J］. Science & Technology Review, 2005,23(8):4-9. (in Chinese)

[19] [19] ZHANG W Y, HOU L Y. Scientific and technological problems of digitalization of microfluids(Part Ⅱ): Conceptual study of digitalization of matter and integrated digitalization of matter-energy-information ［J］. Science & Technology Review, 2006,24(3):41-47. (in Chinese)

[20] [20] HTRDC, MOST, P R CHINA. Single droplet is obtained in femtoliter scale by new microfluids digitalization technology［J］. Basic Scientific Research Express, 2004(4):6-7. (in Chinese)

[21] [21] ZHANG X L, HOU L Y, ZHANG W Y. Fabrication of in-line micropipette for digital micro-jetting experiment ［J］. Opt. Precision Eng., 2008,16(11):2221-2227. ( in Chinese)

[22] [22] GENG X, HOU L Y, ZHANG W Y. Implementation of digital dispensing technology for microfluids ［J］. Opt. Precision Eng., 2009,17(8):1902-1907. ( in Chinese)

[23] [23] MU L L, HOU L Y, ZHANG W Y. Design of flow cytometry based on microfluids digitalization technology ［J］. Journal of Chemical Industry and Engineering, 2010,61(4):949-954. (in Chinese)

[24] [24] LIN F ,WU T, QI H B, et al.. Study on TC4 powder laser micro cladding deposition manufacturin by powder precise jet ［C］. Proceedings of the 13th International Conference on Non Traditional Machining, Nanchang, P. R. China: Non Traditional Machining Branch of CMES, 2009:546-552. (in Chinese)

[25] [25] WU T. Study on high precise metal cladding deposition manufacturing by powder digital jet ［D］. Beijing: Tsinghua University, 2009. (in Chinese)