[1] [1] WU J T, CHEN H Y, LUO X, et al. Design, fabrication, microstructure, and properties of highly porous alumina whisker foam ceramic［J］. Ceramics International, 2022, 48(2): 2776-2781.

[2] [2] CHEN Y, WANG N N, OLA O, et al. Porous ceramics: light in weight but heavy in energy and environment technologies［J］. Materials Science and Engineering Reports, 2021, 143: 100589.

[3] [3] YIN J Q, HAO J M, ZHANG W C, et al. Research progress on preparation of porous ceramics via micro-emulsion template［J］. China Ceramic, 2020, 56(5): 1-9 (in Chinese).

[4] [4] LIU Y, SHEN H L, ZHANG J J, et al. High strength porous ceramics and its potential in adsorption and building materials: a short process to co-disposal secondary aluminum dross and quicklime［J］. Construction and Building Materials, 2023, 395: 132292.

[5] [5] YUAN Q, TAN H, YANG T W, Et al. Preparation methods and research status of porous ceramics［J］. Bulletin of the Chinese Ceramic Society, 2021, 40(8): 2687-2701 (in Chinese).

[6] [6] LI K Z, LUO J, DONG L H, et al. TiN porous ceramics with excellent electrochemical properties prepared by freeze-drying and in-situ nitridation reaction［J］. Ceramics International, 2022, 48(13): 19017-19025.

[7] [7] NISHIHORA R K, RACHADEL P L, QUADRI M G N, et al. Manufacturing porous ceramic materials by tape casting: a review$$J$$. Journal of the European Ceramic Society, 2018, 38(4): 988-1001.

[8] [8] SUN Z Q. Controllable sintering and performance study of porous oxide ceramics［D］. Beijing: University of Chinese Academy of Sciences, 2018 (in Chinese).

[9] [9] ZHANG B, YANG Y, FAN X L. Processing, microstructure, and properties of porous ceramic composites with directional channels［J］. Journal of Materials Science & Technology, 2024, 168: 1-15.

[10] [10] ZHU Y, GUO B, ZUO W R, et al. Effect of sintering temperature on structure and properties of porous ceramics from tungsten ore tailings［J］. Materials Chemistry and Physics, 2022, 287: 126315.

[11] [11] HAN L, LI X J, LI F L, et al. Superhydrophilic/air-superoleophobic diatomite porous ceramics for highly-efficient separation of oil-in-water emulsion［J］. Journal of Environmental Chemical Engineering, 2022, 10(5): 108483.

[12] [12] XU S, CHEN L Z, GONG M Q, et al. Characterization and engineering application of a novel ceramic composite insulation material［J］. Composites Part B: Engineering, 2017, 111: 143-147.

[13] [13] DU C F, LI L J, WANG Y, et al. Atmospheric pressure preparation and property characterization of SiO2 aerogel fiber thermal insulation composites［J］. Bulletin of the Chinese Ceramic Society, 2022, 41(12): 4406-4411+4418 (in Chinese).

[14] [14] DU H R, XING Y Q, LI X, et al. Effects of fibers and opacifiers on properties of nanoporous powder insulation material［J］. Bulletin of the Chinese Ceramic Society, 2021, 40(10): 3257-3264 (in Chinese)

[15] [15] ZHENG Y, WEI Z H, ZHANG Y, et al. Preparation and properties of porous zirconia based thermal insulation materials［J］. Bulletin of the Chinese Ceramic Society, 2020, 39(11): 3643-3648 (in Chinese).

[16] [16] LIU R P, XU T T, WANG C G. A review of fabrication strategies and applications of porous ceramics prepared by freeze-casting method［J］. Ceramics International, 2016, 42(2): 2907-2925.

[17] [17] HWA L C, RAJOO S, NOOR A M, et al. Recent advances in 3D printing of porous ceramics: a review［J］. Current Opinion in Solid State and Materials Science, 2017, 21(6): 323-347.

[18] [18] HAI O, XIAO X N, XIE Q B, et al. Preparation of three-dimensionally linked pore-like porous atomized ceramics with high oil and water absorption rates［J］. Journal of the European Ceramic Society, 2023, 43(10): 4530-4540.

[19] [19] BOWEN J J, MOORAJ S, GOODMAN J A, et al. Hierarchically porous ceramics via direct writing of preceramic polymer-triblock copolymer inks［J］. Materials Today, 2022, 58: 71-79.

[20] [20] DING Y J, ZHANG X Y, WU B Y, et al. Highly porous ceramics production using slags from smelting of spent automotive catalysts［J］. Resources, Conservation and Recycling, 2021, 166: 105373.

[21] [21] HAMMEL E C, IGHODARO O L R, OKOLI O I. Processing and properties of advanced porous ceramics: an application based review［J］. Ceramics International, 2014, 40(10): 15351-15370.

[22] [22] ZHANG F, LI Z A, XU M J, et al. A review of 3D printed porous ceramics［J］. Journal of the European Ceramic Society, 2022, 42(8): 3351-3373.

[23] [23] WANG S Y, YANG Z, LUO X D, et al. Preparation of calcium hexaluminate porous ceramics by gel-casting method with polymethyl methacrylate as pore-forming agent［J］. Ceramics International, 2022, 48(20): 30356-30366.

[24] [24] ZHANG H H, LIU H, ZHU M, et al. Selective microwave absorption of SiC-Si3N4 porous ceramics prepared by sacrificial template method［J］. Ceramics International, 2023, 49(16): 27604-27613.

[25] [25] ELIK A, CALAR G, CELIK Y. Fabrication of porous Al2O3 ceramics using carbon black as a pore forming agent by spark plasma sintering［J］. Ceramics International, 2022, 48(19): 28181-28190.

[26] [26] HEICHEL D N. Method of making a ceramic article having open porous interior: H48［P］. 1986-04-01.

[27] [27] YANG H, DONG B, YU C, et al. Progress in the preparation of ceramic foam filters for cast steel with polymer sponge replica technique［J］. Journal of Ceramics, 2023, 44(4): 662-670 (in Chinese).

[28] [28] YANG C Y, LU M, LIU P S. The research progress of porous heat-resistant ceramic［J］. Journal of Ceramics, 2014, 35(2): 132-138 (in Chinese).

[29] [29] HAN L, CHEN Y, CHANG H, et al. One-pot foam-gelcasting/nitridation synthesis of high porosity nano-whiskers based 3D Si3N4 porous ceramics［J］. Journal of the European Ceramic Society, 2021, 41(12): 6070-6074.

[30] [30] CAO J J, LI W F, GUO H S, et al. Effects of nano-CaCO3 and nano-iron phosphate on microstructure and properties of SiO2 porous ceramics prepared by direct foaming［J］. Materials Today Communications, 2023, 35: 105690.

[31] [31] ZHANG X, HE J F, HAN L, et al. Foam gel-casting preparation of SiC bonded ZrB2 porous ceramics for high-performance thermal insulation［J］. Journal of the European Ceramic Society, 2023, 43(1): 37-46.

[32] [32] LIU W J, ZHOU G X, LIN K P, et al. Research progress on slurry system of ceramic 3D printing technology based on slurry morphology［J］. Bulletin of the Chinese Ceramic Society, 2021, 40(6): 1918-1926 (in Chinese).

[33] [33] ZHENG J T. Research on 3D printing technology of high performance ceramic curing［D］. Shanghai: Shanghai Jiao Tong University, 2021 (in Chinese).

[34] [34] LIU Y, CHEN Z W. Research progress in photopolymerization-based 3D printing technology of ceramics［J］. Journal of Materials Engineering, 2020, 48(9)： 1-12 (in Chinese)

[35] [35] WANG S X, LI L, BI L N, et al. Rapid preparation of thick-walled 3D printing silica ceramics［J］. Bulletin of the Chinese Ceramic Society, 2021, 40(6)： 1943-1949 (in Chinese).

[36] [36] HOSSAIN S S, BAEK I W, SON H J, et al. 3D printing of porous low-temperature in situ mullite ceramic using waste rice husk ash-derived silica［J］. Journal of the European Ceramic Society, 2022, 42(5): 2408-2419.

[37] [37] CHEN H D, PAN Y Y, CHEN B, et al. Fabrication of porous aluminum ceramics beyond device resolution via stereolithography 3D printing［J］. Ceramics International, 2023, 49(11): 18463-18469.

[38] [38] ZAHRA M S, HASINA B, STEFAN S, et al. A review on silica aerogel-based materials for acoustic applications［J］. Journal of Non-Crystalline Solids, 2021, 562: 120770.

[39] [39] KARAMIKAMKAR S, NAGUIB H E, PARK C B. Advances in precursor system for silica-based aerogel production toward improved mechanical properties, customized morphology, and multifunctionality: a review［J］. Advances in Colloid and Interface Science, 2020, 276: 102101.

[40] [40] LIU Y C, ZHENG P P, WU H J, et al. Preparation and dynamic moisture adsorption of fiber felt/silica aerogel composites with ultra-low moisture adsorption rate［J］. Construction and Building Materials, 2023, 363: 129825.

[41] [41] METI P, MAHADIK D B, LEE K Y, et al. Overview of organic-inorganic hybrid silica aerogels: progress and perspectives［J］. Materials & Design, 2022, 222: 111091.

[42] [42] MIRMOEINI S S, HOSSEINI S H, LOTFI JAVID A, et al. Essential oil-loaded starch/cellulose aerogel: preparation, characterization and application in cheese packaging［J］. International Journal of Biological Macromolecules, 2023, 244: 125356.

[43] [43] KISTLER S S. Coherent expanded aerogels and jellies［J］. Nature, 1931, 127(3211): 741.

[44] [44] NICOLAON G A. Préparation des aérogels de silice  partir d’orthosilicate de méthyle en milieu alcoolique et leurs propriétés［J］. Bulletin de la Société Chimique de France, 1968, 5: 1906-1911.

[45] [45] TEWARI P H, HUNT A J, LOFFTUS K D. Ambient-temperature supercritical drying of transparent silica aerogels［J］. Materials Letters, 1985, 3(9/10): 363-367.

[46] [46] LI C D, LIU Q S, ZHANG G H, et al. Rapid synthesis of MTES-derived silica aerogel monoliths in Cetyltrimethylammonium bromide/water solvent system by ambient pressure drying［J］. Powder Technology, 2023, 418: 118314.

[47] [47] DUAN Y D, WANG L J, LI S Y, et al. Modulating pore microstructure of silica aerogels dried at ambient pressure by adding N-hexane to the solvent［J］. Journal of Non-Crystalline Solids, 2023, 610: 122312.

[48] [48] ZHAO C, LI Y K, YE W G, et al. Performance regulation of silica aerogel powder synthesized by a two-step sol-gel process with a fast ambient pressure drying route［J］. Journal of Non-Crystalline Solids, 2021, 567: 120923.

[49] [49] YANG Z C. Preparation and properties of silica elastic aerogel with organosilane as precursor［D］. Tianjin: Tianjin University, 2020 (in Chinese).

[50] [50] DING J, ZHONG K, LIU S J, et al. Flexible and super hydrophobic polymethylsilsesquioxane based silica aerogel for organic solvent adsorption via ambient pressure drying technique［J］. Powder Technology, 2020, 373: 716-726.

[51] [51] ZHANG G Q, ZHAO C X, XIN Y, et al. Nondestructive inspection for ceramic matrix composite insulation tile based on FMCW terahertz technology［J］. Nondestructive Testing, 2020, 42(12): 29-34 (in Chinese).

[52] [52] LPEZ PAULA V, HERNNDEZ MARA F, DIEGO R, et al. Porous acicular mullite ceramics produced from well and poorly crystallized kaolinite［J］. Applied Clay Science, 2023, 238: 106937.

[53] [53] DONG X, ZHENG Y, XIE D W, et al. Multi-functional mullite fiber-based porous ceramics with a multilevel pore structure assembled by alumina platelets and mullite whiskers［J］. Ceramics International, 2023, 49(1): 847-854.

[54] [54] QIN Z, XU X J, XU T F, et al. High-strength thermal insulating porous mullite fiber-based ceramics［J］. Journal of the European Ceramic Society, 2022, 42(15): 7209-7218.

[55] [55] DU B, HONG C Q, ZHANG X H, et al. Ablation behavior of advanced TaSi2-based coating on carbon-bonded carbon fiber composite/ceramic insulation tile in plasma wind tunnel［J］. Ceramics International, 2018, 44(3): 3505-3510.

[56] [56] YANG Y L, FU W Y, CHEN X X, et al. Fabrication of homogeneous mullite-based fiber porous ceramics with high strength and porosity［J］. Journal of the European Ceramic Society, 2022, 42(15): 7219-7227.

[57] [57] HE D L, OU D B, GAO H, et al. Thermal insulation and anti-vibration properties of MoSi2-based coating on mullite fiber insulation tiles［J］. Ceramics International, 2022, 48(2): 1844-1850.

[58] [58] CAO Y Q, XU X J, QIN Z, et al. Vat photopolymerization 3D printing of thermal insulating mullite fiber-based porous ceramics［J］. Additive Manufacturing, 2022, 60: 103235.

[59] [59] TAO X, GUO L L, ZHANG J F, et al. Preparation of La-monazite fiber coating on quartz fiber fabric by a repeated dip-sintering method［J］. Materials Chemistry and Physics, 2022, 279: 125753.

[60] [60] ZHOU N, ZHAO M N, XU B S, et al. Effects of fiber aspect ratio and fabrication temperature on the microstructure and mechanical properties of elastic fibrous porous ceramics by press-filtration method［J］. Ceramics International, 2023, 49(7): 11038-11046.

[61] [61] WANG H B, QUAN X D, YIN L H, et al. Lightweight quartz fiber fabric reinforced phenolic aerogel with surface densified and graded structure for high temperature thermal protection［J］. Composites Part A: Applied Science and Manufacturing, 2022, 159: 107022.

[62] [62] LI L, LIU X L, WANG G, et al. Research progress of ultrafine alumina fiber prepared by sol-gel method: a review［J］. Chemical Engineering Journal, 2021, 421: 127744.

[63] [63] LI L, REN H R, LIU Y L, et al. Facile construction of hierarchical porous ultrafine alumina fibers (HPAFs) and its application for dye adsorption［J］. Microporous and Mesoporous Materials, 2020, 308: 110544.

[64] [64] DANG W, WANG W H, WU P F, et al. Freeze-cast porous Al2O3 ceramics strengthened by up to 80% ceramics fibers［J］. Ceramics International, 2022, 48(7): 9835-9841.

[65] [65] DONG X, AN Q L, ZHANG S P, et al. Porous ceramics based on high-thermal-stability Al2O3-ZrO2 nanofibers for thermal insulation and sound absorption applications［J］. Ceramics International, 2023, 49(19): 31035-31045.

[66] [66] CHA H A, JO M G, MOON Y K, et al. Highly porous YSZ ceramic foams using hollow spheres with holes in their shell for high-performance thermal insulation［J］. Journal of the European Ceramic Society, 2023, 43(15): 7041-7052.

[67] [67] MATSUDA R M, GUBAREVICH A V, WADA H, et al. Effect of sintering temperature on the characteristics of ceramic hollow spheres produced by sacrificial template technique［J］. Ceramics International, 2016, 42(7): 8409-8412.

[68] [68] ZHAO J L, LI J L, ZHANG X F, et al. Fabrication of porous Al2TiO5-Al2O3 ceramics using Al2O3 hollow spheres coated with TiO2 sol［J］. Ceramics International, 2022, 48(19): 27349-27359.

[69] [69] LIAO X, CHEN L, XIE Y, et al. Thermal properties of mullite based porous ceramics derived from high silica tailings obtained after extracting alumina from high alumina coal ash［J］. Journal of Physics and Chemistry of Solids, 2023, 180: 111465.

[70] [70] YANG F Y, ZHAO S, CHEN G B, et al. High-strength, multifunctional and 3D printable mullite-based porous ceramics with a controllable shell-pore structure［J］. Advanced Powder Materials, 2024, 3(1): 100153.

[71] [71] YUN S J, KIM J H, JANG J, et al. Fabrication of highly porous and adhesive thick Y2O3 film by room-temperature spray process for thermal insulation coating［J］. Ceramics International, 2023, 49(10): 16216-16224.

[72] [72] JIANG C, ZHU Z H, CHEN J. Laser texturing at interface for improved strain tolerance and thermal insulation performance of thermal barrier coatings［J］. Surface and Coatings Technology, 2023, 459: 129385.

[73] [73] PAKSERESHT A, SHARIFIANJAZI F, ESMAEILKHANIAN A, et al. Failure mechanisms and structure tailoring of YSZ and new candidates for thermal barrier coatings: a systematic review［J］. Materials & Design, 2022, 222: 111044.

[74] [74] YAN G, SUN Y, ZHAO X L, et al. The enhanced thermal shock resistance performance induced by interface effect in blade-level La2Ce2O7/YSZ thermal barrier coating［J］. Applied Surface Science, 2023, 619: 156723.

[75] [75] YANG M, LI Z G, WANG X Y, et al. Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings［J］. Ceramics International, 2022, 48(1): 1125-1131.

[76] [76] WANG J S, SUN J B, ZHANG H, et al. Effect of spraying power on microstructure and property of nanostructured YSZ thermal barrier coatings［J］. Journal of Alloys and Compounds, 2018, 730: 471-482.