[1] [1] Sun W W, Zhu Y M, Marceau R, Wang L Y, Zhang Q, Gao X and Hutchinson C 2019 Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity Science 363 972–5

[2] [2] ShaoCW, ZhaoS,WangXG,ZhuYK,ZhangZFand Ritchie R O 2019 Architecture of high-strength aluminum–matrix composites processed by a novel microcasting technique NPG Asia Mater. 11 69

[3] [3] Zhou X, Li X Y and Lu K 2018 Enhanced thermal stability of nanograined metals below a critical grain size Science 360 526–30

[4] [4] Meyers M A and Chawla K K 2009 Mechanical Behavior of Materials 2nd edn (Cambridge: Cambridge University Press)

[5] [5] Sajjadi S A, Ezatpour H R and Torabi Parizi M 2012 Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes Mater. Des. 34 106–11

[6] [6] Curtarolo S, Hart G L W, Nardelli M B, Mingo N, Sanvito S and Levy O 2013 The high-throughput highway to computational materials design Nat. Mater. 12 191–201

[7] [7] Zhao J C, Jackson M R, Peluso L A and Brewer L N 2002 A diffusion-multiple approach for mapping phase diagrams, hardness, and elastic modulus JOM 54 42–45

[8] [8] Liu X et al 2012 Inkjet printing assisted synthesis of multicomponent mesoporous metal oxides for ultrafast catalyst exploration Nano Lett. 12 5733–9

[9] [9] Kang N, Coddet P, Wang J, Yuan H, Ren Z M, Liao H L and Coddet C 2017 A novel approach to in-situ produce functionally graded silicon matrix composite materials by selective laser melting Compos. Struct. 172 251–8

[10] [10] Cordero Z C, Knight B E and Schuh C A 2016 Six decades of the Hall–Petch effect—a survey of grain-size strengthening studies on pure metals Int. Mater. Rev. 61 495–512

[11] [11] Wang Y M, Chen M W, Zhou F H and Ma E 2002 High tensile ductility in a nanostructured metal Nature 419 912–5

[12] [12] Huang F and Tao N R 2011 Effects of strain rate and deformation temperature on microstructures and hardness in plastically deformed pure aluminum J. Mater. Sci. Technol. 27 1–7

[13] [13] Assadi H, G.rtner F, Stoltenhoff T and Kreye H 2003 Bonding mechanism in cold gas spraying Acta Mater. 51 4379–94

[14] [14] Weng L, Shen Y, Fan T X and Xu J Q 2015 A study of interface damage on mechanical properties of particle-reinforced composites JOM 67 1499–504

[15] [15] Rana R S, Purohit R and Das S 2012 Reviews on the influences of alloying elements on the microstructure and mechanical properties of aluminum alloys and aluminum alloy composites Int. J. Sci. Res. Publ. 2 1–7

[16] [16] An X H 2021 Structural hierarchy defeats alloy cracking Science 373 857–8

[17] [17] Gleiter H 2016 Nanoglasses: a new kind of noncrystalline material and the way to an age of new technologies? Small 12 2225–33

[18] [18] Vyatskikh A, Delalande S, Kudo A, Zhang X, Portela C M and Greer J R 2018 Additive manufacturing of 3D nano-architected metals Nat. Commun. 9 593

[19] [19] Hasan M, Zhao J W and Jiang Z Y 2019 Micromanufacturing of composite materials: a review Int. J. Extreme Manuf. 1 012004