[1] [1] YUAN J Y, ZHANG H, ZHOU X, et al. Phase and microstructure evolution of SrCeO3 ceramic when exposed to molten V2O5 at 700-1250 ℃[J]. Corros Sci, 2018, 145: 295-306.

[2] [2] ZHANG B P, SONG W J, WEI L L, et al. Novel thermal barrier coatings repel and resist molten silicate deposits[J]. Scr Mater, 2019, 163: 71-76.

[7] [7] LIU Z, OUYANG J, WANG B, et al. Preparation and thermophysical properties of NdxZr1-xO2-x/2 (x = 0.1, 0.2, 0.3, 0.4, 0.5) ceramics[J]. Alloys Compd, 2008, 466(1-2): 39-44.

[8] [8] AHMADI-PIDANI R, SHOJA-RAZAVI R, MOZAFARINIA R, et al. Evaluation of hot corrosion behavior of plasma sprayed ceria and yttria stabilized zirconia thermal barrier coatings in the presence of Na2SO4+V2O5 molten salt[J]. Ceram Int, 2012, 38(8): 6613-6620.

[9] [9] HABIBI M H, WANG L, LIANG J D, et al. An investigation on hot corrosion behavior of YSZ-Ta2O5 in Na2SO4 +V2O5 salt at 1100 ℃[J]. Corros Sci, 2013, 75: 409-414.

[10] [10] WANG L, LI D C, YANG J S, et al. Modeling of thermal properties and failure of thermal barrier coatings with the use of finite element methods: A review[J]. J Eur Ceram Soc, 2016, 36(6): 1313-1331.

[11] [11] CAO X Q, LI J Y, ZHONG X H, et al. La2(Zr0.7Ce0.3)2O7—A new oxide ceramic material with high sintering-resistance[J]. Mater Lett, 2008, 62(17-18): 2667-2669.

[12] [12] CAO X Q, VASSEN R, TIETZ F, et al. New double-ceramic-layer thermal barrier coatings based on zirconia-rare earth composite oxides[J]. J Eur Ceram Soc, 2006, 26(3): 247-251.

[13] [13] LEVI C G. Emerging materials and processes for thermal barrier systems[J]. Curr Opin Solid State Mater Sci, 2004, 8(1): 77-91.

[14] [14] XU Z H, HE L M, ZHONG X H, et al. Thermal barrier coating of lanthanum-zirconium-cerium composite oxide made by electron beam-physical vapor deposition[J]. J Alloys Compd, 2009, 478(1-2): 168-172.

[15] [15] MA L, MA W M, SUN X D, et al. Microstructures and mechanical properties of Gd2Zr2O7/ZrO2(3Y) ceramics[J]. J Alloys Compd, 2015, 644: 416-422.

[16] [16] GUO L, GUO H B, PENG H, et al. Thermophysical properties of Yb2O3 doped Gd2Zr2O7 and thermal cycling durability of (Gd0.9Yb0.1)2Zr2O7/YSZ thermal barrier coatings[J]. J Eur Ceram Soc, 2014, 34(5): 1255-1263.

[17] [17] TABESHFAR M, SALEHI M, DINI G, et al. Hot corrosion of Gd2Zr2O7, Gd2Zr2O7/YbSZ, YSZ+Gd2Zr2O7/YbSZ, and YSZ thermal barrier coatings exposed to Na2SO4+V2O5[J]. Surf Coat Technol, 2021, 409: 126718.

[18] [18] GUO L, ZHANG C L, XU L M, et al. Effects of TiO2 doping on the defect chemistry and thermo-physical properties of Yb2O3 stabilized ZrO2[J]. J Eur Ceram Soc, 2017, 37(13): 4163-4169.

[19] [19] XIANG J Y, CHEN S H, HUANG J H, et al. Phase structure and thermophysical properties of Co-doped La2Zr2O7 ceramics for thermal barrier coatings[J]. Ceram Int, 2012, 38(5): 3607-3612.

[20] [20] WANG Y F. The improvement of thermal and mechanical properties of La2Zr2O7-based pyrochlores as high temperature thermal barrier coatings[D]. Manchester, North West England, UK: University of Manchester, 2013

[23] [23] YAN K, XIANG Y, YU H Y, et al. Hot corrosion mechanism and thermal cycling performance of air-plasma-sprayed LaYbZr2O7 thermal barrier coatings in the vanadate-containing molten salts[J]. Surf Coat Technol, 2023, 472: 129925.

[24] [24] CHEN C, LIANG T Q, GUO Y, et al. Effect of scandia content on the hot corrosion behavior of Sc2O3 and Y2O3 Co-doped ZrO2 in Na2SO4+V2O5 molten salts at 1000 ℃[J]. Corros Sci, 2019, 158: 108094.

[25] [25] Reser M K. Phase Diagrams for Ceramists[M]. 1969 Supplement, Columbus, American Ceramic Society, OH, 1969: Fig, 2405.

[26] [26] YOKOKAWA H, SAKAI N, KAWADA T, et al. Chemical potential diagrams for rare earth-transition metal-oxygen systems: I, ln-V-O and ln-Mn-O system[J]. J Am Ceram Soc, 1990, 73(3): 649-658.

[27] [27] BARIN I. Thermochemical Data of Pure Substances[M]. third ed. VCH Verlagsgesellschaft Gmb H, Weinheim, Germany, 1989.

[29] [29] TRIBIN H C, LOFTUS J, SATTERFIELD C N. Viscosity of the vanadium pentoxide-potassium sulfate eutectic[J]. J Chem Eng Data, 1966, 11(1): 44-45.