[1] [1] MORI Y, ELLINGWOOD B R. Reliability-based service-life assessment of aging concrete structures［J］. J Struct Eng, 1993, 119(5): 1600-1621.

[2] [2] GLASSER F P, MARCHAND J, SAMSON E. Durability of concrete-degradation phenomena involving detrimental chemical reactions［J］. Cem Concr Res, 2008, 38(2): 226-246.

[5] [5] JIA J. A technical review of hydro-project development in China［J］. Engineering, 2016, 2(3): 302-312.

[7] [7] DAS A K, LAI T T, CHAN C W, et al. A new non-linear framework for localization of acoustic sources［J］. Struct Health Monit, 2019, 18(2): 590-601.

[8] [8] ZHANG X, FENG N Z, WANG Y, et al. Acoustic emission detection of rail defect based on wavelet transform and Shannon entropy［J］. J Sound Vib, 2015, 339(17): 419-432.

[9] [9] BEHNIA A, CHAI H K, SHIOTANI T. Advanced structural health monitoring of concrete structures with the aid of acoustic emission［J］. Constr Build Mater, 2014, 65: 282-302.

[10] [10] JUNG B H, KIM Y W, LEE J R. Laser-based structural training algorithm for acoustic emission localization and damage accumulation visualization in a bolt joint structure［J］. Struct Health Monit, 2019, 18(5-6): 1851-1861.

[12] [12] LI W, JIANG Z, YANG Z. Acoustic characterization of damage and healing of microencapsulation-based self-healing cement matrices［J］. Cem Concr Compos, 2017, 84: 48-61.

[13] [13] SAGAR R V, PRASAD B K R, KUMAR S S. An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique［J］. Cem Concr Res, 2012, 42(8): 1094-1104.

[14] [14] HASSAN F, MAHMOOD A K, YAHYA N, et al. State-of-the-art review on the acoustic emission source localization techniques［J］. IEEE Access, 2021, 9: 101246-101266.

[15] [15] NEJATI H R, NAZERIGIVI A, IMANI M, et al. Monitoring of fracture propagation in brittle materials using acoustic emission techniques-A review［J］. Comput Concr, 2020, 25(1): 15-27.

[16] [16] TSANGOURI E, AGGELIS D G. A review of acoustic emission as indicator of reinforcement effectiveness in concrete and cementitious composites［J］. Constr Build Mater, 2019, 224(10): 198-205.

[17] [17] GHOLIZADEH S, LEMAN Z, BAHARUDIN B T H T. A review of the application of acoustic emission technique in engineering［J］. Struct Eng Mech, 2015, 54(6): 1075-1095.

[18] [18] NAIR A, CAI C S. Acoustic emission monitoring of bridges: Review and case studies［J］. Eng Struct, 2010, 32(6): 1704-1714.

[19] [19] VERSTRYNGE E, LACIDOGNA G, ACCORNERO F, et al. A review on acoustic emission monitoring for damage detection in masonry structures［J］. Constr Build Mater, 2021, 268(25): 121089.

[20] [20] NAKAMURA H, OHTSU M, ENOKI M, et al. Practical acoustic emission testing［M］. Tokyo: Springer, 2016: 5-12.

[21] [21] YANG L, PATHIRAGE M, SU H, et al. Computational modeling of temperature and relative humidity effects on concrete expansion due to alkali-silica reaction［J］. Cem Concr Compos, 2021, 124: 104237.

[22] [22] YANG L, PATHIRAGE M, SU H, et al. Computational modeling of expansion and deterioration due to alkali-silica reaction: Effects of size range, size distribution, and content of reactive aggregate［J］. Int J Solids Struct, 2022, 234: 111220.

[24] [24] ABDELRAHMAN M, ELBATANOUNY M K, ZIEHL P, et al. Classification of alkali-silica reaction damage using acoustic emission: A proof-of-concept study［J］. Constr Build Mater, 2015, 95: 406-413.

[25] [25] FARNAM Y, GEIKER M R, BENTZ D, et al. Acoustic emission waveform characterization of crack origin and mode in fractured and ASR damaged concrete［J］. Cem Concr Compos, 2015, 60: 135-145.

[26] [26] SOLTANGHARAEI V, ANAY R, HAYES N W, et al. Damage mechanism evaluation of large-scale concrete structures affected by alkali-silica reaction using acoustic emission［J］. Appl Sci, 2018, 8(11): 2148.

[28] [28] ABDELRAHMAN M, ELBATANOUNY M, SERRATO M, et al. Classification of alkali-silica reaction and corrosion distress using acoustic emission［C］//42nd Annual Review of Progress in Quantitative Nondestructive Evaluation, Minneapolis, USA, 2016, 1706(1): 140001.

[29] [29] KAWASAKI Y, WAKUDA T, KOBARAI T, et al. Corrosion mechanisms in reinforced concrete by acoustic emission［J］. Constr Build Mater, 2013, 48: 1240-1247.

[31] [31] LI W, XU, HO S C M, et al. Monitoring concrete deterioration due to reinforcement corrosion by integrating acoustic emission and FBG strain measurements［J］. Sensors, 2017, 17(3): 657.

[32] [32] LYONS R, ING M, AUSTIN S. Influence of diurnal and seasonal temperature variations on the detection of corrosion in reinforced concrete by acoustic emission［J］. Corros Sci, 2004, 47(2): 413-433.

[33] [33] PATIL S, KARKARE B, GOYAL S. Corrosion induced damage detection of in-service RC slabs using acoustic emission technique［J］. Constr Build Mater, 2017, 156: 123-130.

[34] [34] PEI H, LI Z, ZHANG J, et al. Performance investigations of reinforced magnesium phosphate concrete beams under accelerated corrosion conditions by multi techniques［J］. Constr Build Mater, 2015, 93: 989-994.

[35] [35] QIAO Y, SUN W, JIANG J . Damage process of concrete subjected to coupling fatigue load and freeze/thaw cycles［J］. Constr Build Mater, 2015, 93: 806-811.

[37] [37] CARPINTERI A, GRAZZINI A, LACIDOGNA G, et al. Durability evaluation of reinforced masonry by fatigue tests and acoustic emission technique［J］. Struct Control Health Monit, 2014, 21(6): 950-961.

[38] [38] CHEN C, CHEN X, GUO S. Experimental study on acoustic emission characteristic of fatigue crack growth of self-compacting concrete［J］. Struct Control Health Monit, 2019, 26(4): e2332.

[39] [39] NOR N M, IBRAHIM A, BUNNORI N M, et al. Acoustic emission signal for fatigue crack classification on reinforced concrete beam［J］. Constr Build Mater, 2013, 49: 583-590.

[40] [40] THUMMEN F, OLAGNON C, GODIN N. Cyclic fatigue and lifetime of a concrete refractory［J］. J Eur Ceram Soc, 2005, 26(15): 3357-3363.

[41] [41] ZHOU M, LIAO J, AN L, et al. Analysis of stress-induced cracks in concrete and mortar under cyclic uniaxial compression［J］. Constr Build Mater, 2018, 187: 652-664.

[44] [44] PRASHANTH M H, SINGH P, KISHEN J M C. Role of longitudinal reinforcement on the behavior of under reinforced concrete beams subjected to fatigue loading［J］. Int J Fatigue, 2019, 125: 271-290.

[45] [45] ZHANG Y, ZHAO Z. Internal stress development and fatigue performance of normal and crumb rubber concrete［J］. J Mater Civ Eng, 2015, 27(2): A4014006.

[46] [46] LI W, SUN W, JIANG J. Damage of concrete experiencing flexural fatigue load and closed freeze/thaw cycles simultaneously［J］. Constr Build Mater, 2010, 25(5): 2604-2610.

[47] [47] FARNAM Y, BENTZ D, HAMPTON A, et al. Acoustic emission and low-temperature calorimetry study of freeze and thaw behavior in cementitious materials exposed to sodium chloride salt［J］. Transp Res Rec, 2014, 2441(1): 81-90.

[48] [48] POWERS T C. A working hypothesis for further studies of frost resistance of concrete［J］. J Am Concr Inst, 1945, 16(4): 245-272.

[49] [49] POWERS T C, HELMUTH R A. Theory of volume changes in hardened Portland cement pastes during freezing［C］//Proceedings of the Highway Research Board Annual Meeting. Washington, D. C., USA, 1953: 285-297.

[50] [50] VALENZA II J J, SCHERER G W. A review of salt scaling: II. Mechanisms［J］. Cem Concr Res, 2007, 37(7): 1022-1034.

[51] [51] SOULIOTI D, BARKOULA N M, PAIPETIS A, et al. Acoustic emission behavior of steel fibre reinforced concrete under bending［J］. Constr Build Mater, 2009, 23(12): 3532-3536.

[52] [52] OHNO K, OHTSU M. Crack classification in concrete based on acoustic emission［J］. Constr Build Mater, 2010, 24(12): 2339-2346.

[53] [53] AGGELIS D G. Classification of cracking mode in concrete by acoustic emission parameters［J］. Mech Res Commun, 2011, 38(3): 153-157.

[54] [54] ELFERGANI H A, PULLIN R, HOLFORD K M. Damage assessment of corrosion in prestressed concrete by acoustic emission［J］. Constr Build Mater, 2013, 40: 925-933.

[55] [55] UDDIN F A K M, SHIGEISHI M, OHTSU M. Fracture mechanics of corrosion cracking in concrete by acoustic emission［J］. Meccanica, 2006, 41(4): 425-442.

[56] [56] OHTSU M. Acoustic emission theory for moment tensor analysis［J］. Nondestruct Test Evaluation, 1995, 6(3): 169-184.

[57] [57] CHOI W-C, YUN H-D. Acoustic emission activity of CFRP- strengthened reinforced concrete beams after freeze-thaw cycling［J］. Cold Reg Sci Technol, 2015, 110: 47-58.

[58] [58] OZAWA M, UCHIDA S, KAMADA T, et al. Study of mechanisms of explosive spalling in high-strength concrete at high temperatures using acoustic emission［J］. Constr Build Mater, 2012, 37: 621-628.

[59] [59] HEAP M J, LAVALLEET Y, LAUMANNAL A, et al. The influence of thermal-stressing (up to 1000℃) on the physical, mechanical, and chemical properties of siliceous-aggregate, high-strength concrete［J］. Constr Build Mater, 2013, 42: 248-265.

[60] [60] VLEZ W, MATTA F, ZIEHL P. Acoustic emission monitoring of early corrosion in prestressed concrete piles［J］. Struct Control Health Monit, 2015, 22(5): 873-887.

[61] [61] SHAHID K A, BUNNORI N M, JOHARI M A M, et al. Assessment of corroded reinforced concrete beams: Cyclic load test and acoustic emission techniques［J］. Constr Build Mater, 2020, 233: 117291.

[62] [62] ELBATANOUNY M K, MANGUAL J, ZIEHL P H, et al. Early corrosion detection in prestressed concrete girders using acoustic emission［J］. J Mater Civ Eng, 2014, 26(3): 504-511.

[63] [63] COLOMBO S, FORDE M C, MAIN I G, et al. Predicting the ultimate bending capacity of concrete beams from the “relaxation ratio” analysis of AE signals［J］. Constr Build Mater, 2005, 19(10): 746-754.

[64] [64] SUZUKI T, SHIOTANI T, OHTSU M. Evaluation of cracking damage in freeze-thawed concrete using acoustic emission and X-ray CT image［J］. Constr Build Mater, 2017, 136: 619-626.

[65] [65] SUZUKI T, OGATA H, TAKADA R, et al. Use of acoustic emission and X-ray computed tomography for damage evaluation of freeze- thawed concrete［J］. Constr Build Mater, 2010, 24(12): 2347-2352.

[66] [66] CALABRESE L, CAMPANELLA G, PROVERBIO E. Identification of corrosion mechanisms by univariate and multivariate statistical analysis during long term acoustic emission monitoring on a pre-stressed concrete beam［J］. Corros Sci, 2013, 73: 161-171.

[67] [67] VAN STEEN C, PAHLAVAN L, WEVERS M, et al. Localisation and characterisation of corrosion damage in reinforced concrete by means of acoustic emission and X-ray computed tomography［J］. Constr Build Mater, 2019, 197: 21-29.

[68] [68] ZHENG Y, ZHOU Y, ZHOU Y, et al. Localized corrosion induced damage monitoring of large-scale RC piles using acoustic emission technique in the marine environment［J］. Constr Build Mater, 2020, 243: 118270.

[69] [69] ONGPENG J M C, ORETA A W C, HIROSE S. Monitoring damage using acoustic emission source location and computational geometry in reinforced concrete beams［J］. Appl Sci, 2018, 8(2): 189.

[70] [70] BAN Y, FU X, XIE Q. Revealing the laminar shale microdamage mechanism considering the relationship between fracture geometrical morphology and acoustic emission power spectrum characteristics［J］. Bull Eng Geol Environ, 2020, 79(2): 1083-1096.

[71] [71] FARNAM Y, DICK S, WIESE A, et al. The influence of calcium chloride deicing salt on phase changes and damage development in cementitious materials［J］. Cem Concr Compos, 2015, 64: 1-15.

[72] [72] ING M, AUSTIN S, LYONS R. Cover zone properties influencing acoustic emission due to corrosion［J］. Cem Concr Res, 2004, 35(2): 284-295.

[73] [73] SHI F, WANG J, CUI W, et al. The influence of different factors on acoustic emission signal in the process of monitoring steel corrosion［C］//IOP Conference Series: Materials Science and Engineering. IOP Publishing, 2019, 612(3): 032071.

[74] [74] YUYAMA S, YOKOYAMA K, NIITANI K, et al, et al. Detection and evaluation of failures in high-strength tendon of prestressed concrete bridges by acoustic emission［J］. Constr Build Mater, 2007, 21(3): 491-500.

[75] [75] NAHALI H, DHOUIBI L, IDRISSI H. Effect of Na3PO4 addition in mortar on steel reinforcement corrosion behavior in 3% NaCl solution［J］. Constr Build Mater, 2015, 78: 92-101.

[76] [76] MANSOUR H B, DHOUIBI L, IDRISSI H. Effect of Phosphate-based inhibitor on prestressing tendons corrosion in simulated concrete pore solution contaminated by chloride ions［J］. Constr Build Mater, 2018, 171: 250-260.

[77] [77] LIU S, LIU T, ZHOU J, et al. Relationship between shear-stress distribution and resulting acoustic-emission variation along concrete joints in prefabricated girder structures［J］. Eng Struct, 2019, 196: 109319.

[78] [78] YANG Z, WEISS W J, OLEK J. Water transport in concrete damaged by tensile loading and freeze-thaw cycling［J］. J Mater Civ Eng, 2006, 18(3): 424-434.

[82] [82] TODAK H N, TSUI M, LEY M T, et al. Evaluating freeze-thaw damage in concrete with acoustic emissions and ultrasonics［M］//SHEN G, WU Z, ZHANG J. Advances in acoustic emission technology. Cham: Springer, 2017: 175-189.

[83] [83] LI W, POUR-GHAZ M, CASTRO J, et al. Water absorption and critical degree of saturation relating to freeze-thaw damage in concrete pavement joints［J］. J Mater Civ Eng, 2012, 24(3): 299-307.

[84] [84] SHIELDS Y, GARBOCZI E, WEISS J, et al. Freeze-thaw crack determination in cementitious materials using 3D X-ray computed tomography and acoustic emission［J］. Cem Concr Compos, 2018, 89: 120-129.