[1] [1] WEI J, LI H C, LIU L L, et al. Enhanced tribological and corrosion properties of multilayer ta-C flms via alternating sp3 content［J］. Surf Coat Technol, 2019, 374(2): 317-321.

[2] [2] TAKAHIRO S, TATSUYUKI N, KEISHI O, et al. Differentation of osteoblast and osteoclast cells on hydrogenated-tetrahedral amorphous carbon coated titanium［J］. J Photopolym Sci Technol, 2016, 29: 413-417.

[3] [3] KONKHUNTHOTA N, PHOTONGKAM P, WONGPANY P. Improvement of thermal stability, adhesion strength and corrosion performance of diamond-like carbon flms with titanium doping［J］. Appl Surf Sci, 2019, 469: 471-475.

[4] [4] CHEN B J, SUN X W, TAY B K, et al. Improvement of efficiency and stability of polymer light-emitting devices by modifying indium tin oxide anode surface with ultrathin tetrahedral amorphous carbon film［J］. Appl Phys Lett, 2005, 86: 063506.

[5] [5] OMVIR S P, RAVI T K, SREEKUMAR C. Improved nanomechanical properties of hydrogenated tetrahedral amorphous carbon films measured with ultra low indentation load［J］. Mater Express, 2015, 5: 410-414.

[6] [6] PIAZZA F, MORELL G. Wettability of hydrogenated tetrahedral amorphous carbon［J］. Diam Rela Mater, 2009, 18: 43-48.

[7] [7] ZHANG S D, YAN M F, YANG Y, et al. Excellent mechanical, tribological and anti-corrosive performance of novel Ti-DLC nanocomposite thin films prepared via magnetron sputtering method［J］. Carbon, 2019, 151: 136-143.

[8] [8] XU S P, LI X W, CHEN R D, LI Y H, WANG A Y. Thickness dependence of stress and microstructure in ultrathin tetrahedral amorphous carbon films ［J］. J Chin Ceram Soc, 2019, 47(1): 71-74.

[9] [9] CONWAY N M J, FERRARI A C, FLEWITT A J, et al. Defect and disorder reduction by annealing in hydrogenated tetrahedral amorphous carbon［J］. Diam Relat Mater, 2000, 9: 765-768.

[10] [10] GANESAN R, AKHAVAN B, HIOB M A, et al. HiPIMS carbon coatings show covalent protein binding that imparts enhanced hemocompatibility［J］. Carbon, 2018, 139: 118-128.

[11] [11] PIAZZA F. Hard-hydrogenated tetrahedral amorphous carbon films by distributed electron cyclotron resonance plasma［J］. Int J Refract Metal Hard Mater, 2006, 24: 39-43.

[12] [12] ZHANG W, OBITANI L K, HIRAI Y, et al. Fracture strength of silicon torsional mirror resonators fully coated with submicrometer-thick PECVD DLC film［J］. Sensor Actuat A Phys, 2019, 286: 28-31.

[13] [13] JI L, LI H X, ZHAO F. Microstructure and mechanical properties of Mo/DLC nanocomposite films［J］. Diam Relat Mater, 2008, 17: 1949.

[14] [14] WANG X Y, SUI X D, ZHANG S T, et al. Effect of deposition pressures on uniformity, mechanical and tribological properties of thick DLC coatings inside of a long pipe prepared by PECVD method［J］. Surf Coat Technol, 2019, 375(5): 150-154.

[15] [15] WEI X B, YIN P M, WU J, et al. Deposition of DLC flms on the inner wall of U-type pipes by hollow cathode PECVD［J］. Diam Relat Mater, 2021, 114: 108308.

[16] [16] KASIOROWSKI T, LIN J, SOARES P, et al. Microstructural and tribological characterization of DLC coatings deposited by plasma enhanced techniques on steel substrates［J］. Surf Coat Technol, 2020, 389(4): 125615.

[17] [17] WEILERA J M, ROBERTSONB S, SATTELAV S, et al. Formation of highly tetrahedral amorphous hydrogenated carbon, ta-C:H［J］. Diam Relat Mater, 1995, 4: 268-271.

[18] [18] JOE M, MOON M W, OH J, et al. Molecular dynamics simulation study of the growth of a rough amorphous carbon film by the grazing incidence of energetic carbon atoms［J］. Carbon, 2012, 50: 404-409.

[19] [19] WEI J, GUO P, LIU L L, et al. Corrosion resistance of amorphous carbon film in 3.5 wt% NaCl solution for marine application［J］. Electrochim Acta, 2020, 346: 136282.

[20] [20] FERRARI A C, ROBERTSON J. Doping, strain, orientation and disorder of graphene by Raman spectroscopy［J］. Phys Rev B, 2000, 61: 14095.

[21] [21] FERRARI A C, ROBERTSON J. Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbon［J］. Phys Rev B, 2001, 64: 075414.

[22] [22] SOIN N, ROY S S, RAY S C, et al. Thickness dependent electronic structure of ultra-thin tetrahedral amorphous carbon (ta-C) films［J］. Thin Solid Film, 2012, 520: 2909.

[23] [23] HIROKI Y, SEIKO I, TAKANORI W, et al. Formation of Q-carbon by adjusting sp3 content in diamond-like carbon films and laser energy density of pulsed laser annealing［J］. Carbon, 2020, 167: 504-508.

[24] [24] FERRARI A. C, ROBERTSON J. Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond［J］. Phil Trans R Soc, 2004, 362: 2477.

[25] [25] CUI W G, LAI Q B, ZHANG L, et al. Quantitative measurements of sp3 content in DLC films with Raman spectroscopy［J］. Surf Coat Technol, 2010, 205(7): 1995.

[26] [26] LESIAK B, KOVER L, TOTH J, et al. Low friction and wear behaviour of non-hydrogenated DLC (a-C) sliding against fluorinated tetrahedral amorphous carbon (ta-C-F) at elevated temperatures［J］. Appl Surf Sci, 2018, 452: 223-228.

[27] [27] CUOMO J J, DOYLE J P, BRULEY J, et al. Sputter deposition of dense diamond-like carbon films at low temperature［J］. Appl Phys Lett, 1991, 58: 466-470.

[28] [28] ZHANG X Y, REINHARD S, ERICH M, et al. Practical aspects of the quantification of sp2-hybridized carbon atoms in diamond-like carbon by electron energy loss spectroscopy［J］. Carbon, 2016, 102: 198-207.

[29] [29] XU S P, LI X W, HUANG M D, et al. Stress reduction dependent on incident angles of carbon ions in ultrathin tetrahedral amorphous carbon films［J］. Appl Phys Lett, 2014, 104: 141908.

[30] [30] LI X W, KE P L, ZHENG H, et al. Structural properties and growth evolution of diamond-like carbon films with different incident energies: A molecular dynamics study［J］. Appl Surf Sci, 2013, 273: 670-675.

[31] [31] KABIR M S, ZHOU Z F, XIE Z H, et al. Designing multilayer diamond like carbon coatings for improved mechanical properties［J］. J Mater Sci Technol, 2021, 65: 108-112.