[1] [1] ZHAO N, QING L B, YANG Z F, et al. Experimental and numerical studies on fiber pull-out of steel fiber reinforced cement mortar at different ages［J］. Bulletin of the Chinese Ceramic Society, 2021, 40(7): 2165-2173 (in Chinese).

[2] [2] LI J Q. Experimental study on high toughness fiber reinforced cement-based composites［D］. Xi’an: Chang’an University, 2017 (in Chinese).

[3] [3] YANG X, ZHAO W, JIA Q X, et al. The research status of engineered cementitious composite［J］. Chinese Polymer Bulletin, 2013(12): 21-30 (in Chinese).

[4] [4] CHEN X Y. Experimental study on impact resistance of fiber reinforced concrete［D］. Dalian: Dalian University of Technology, 2012 (in Chinese).

[5] [5] DENG Y F, JIN L Z, HE L, et al. Experimental study of mechanical properties effects on polymer cement mortar and steel fibers［J］. Journal of Jinggangshan University (Natural Sciences Edition), 2016, 37(6): 65-70 (in Chinese).

[6] [6] CHEN H M. Study on properties of steel-polypropylene hybrid fiber cement-based materials［D］. Chongqing: Southwest University, 2016 (in Chinese).

[7] [7] BAI M, NIU D T, JIANG L, et al. Research on improving the mechanical properties and microstructure of concrete with steel fiber［J］. Bulletin of the Chinese Ceramic Society, 2013, 32(10): 2084-2089 (in Chinese).

[8] [8] ZHANG J L, MA W B, GUO X X, et al. Bending toughness and engineering application of steel fiber shotcrete［J］. Railway Construction, 2022, 62(4): 98-101 (in Chinese).

[9] [9] DZGN O A, GL R, AYDIN A C. Effect of steel fibers on the mechanical properties of natural lightweight aggregate concrete［J］. Materials Letters, 2005, 59(27): 3357-3363.

[10] [10] PAJK M, PONIKIEWSKI T. Flexural behavior of self-compacting concrete reinforced with different types of steel fibers［J］. Construction and Building Materials, 2013, 47: 397-408.

[11] [11] HE W, XUE W D, TANG B, et al. Optimization experiment design method and data analysis［M］. Beijing: Chemical Industry Press, 2012 (in Chinese).

[12] [12] Ministry of Housing and Urban-Rural Development, PRC. Design specification for mixing ratio of masonry mortar: JGJ/T 98—2010［S］. Beijing: China Architecture and Building Press, 2010 (in Chinese).

[13] [13] State Administration of Morket Supervision and Administration, National Standardization Management Committee. Test method for strength of cement mortar (ISO method): GB/T 17671—2021［S］. Beijing: Standards Press of China, 2021 (in Chinese).

[14] [14] WANG J, GAO F, QIU S H, et al. Development of alkali-free liquid high-efficiency cement accelerator and study on its rapid setting mechanism［J］. China Concrete and Cement Products, 2013(4): 14-17 (in Chinese).

[15] [15] LI Y, CAI B Q, WU Y S, et al. Research progress of flash setting admixtures for shotcrete［J］. Concrete, 2020(9): 121-125 (in Chinese).

[16] [16] ZENG B. Effect of physical properties of fly ash on mechanical properties and microstructure of cement paste［D］. Mianyang: Southwest University of Science and Technology, 2016 (in Chinese).

[17] [17] LI H, ZHANG Z M, CHEN Y J, et al. Property comparision of ultra-fine fly ash with different fineness［J］. Bulletin of the Chinese Ceramic Society, 2016, 35(9): 2821-2825+2831 (in Chinese).

[18] [18] ZHANG X B, KUANG C G, FANG Z, et al. Orthogonal experimental study on strength of steel fiber reinforced fly ash recycled concrete［J］. Journal of Building Materials, 2014, 17(4): 677-684+694 (in Chinese).

[19] [19] MENG F Q, LI G J, WANG Q B, et al. Research on early warning of debris flow based on efficacy coefficient method［J］. Rock and Soil Mechanics, 2012, 33(3): 835-840 (in Chinese).