[1] J HWANG, R R RAO, L GIORDANO et al. Perovskites in catalysis and electrocatalysis. Science, 751(2017).

[2] I BOZTOSUN, H ĐAPO, M KARAKOÇ. Measuring decay of praseodymium isotopes activated by a clinical LINAC. Modern Physics Letters A, 1650212(2016).

[3] W L I WADUGE, Y CHEN, P ZUO et al. Solid-phase epitaxy of perovskite high dielectric PrAlO₃ films grown by atomic layer deposition for use in two-dimensional electronics and memory devices. ACS Applied Nano Materials, 7449(2019).

[4] A A EMERY, C WOLVERTON. High-throughput DFT calculations of formation energy, stability and oxygen vacancy formation energy of ABO₃ perovskites. Scientific Data, 4: 170153(2017).

[5] E COHEN, L A RISBERG, W A NORDLAND et al. Structural phase transitions in PrAlO₃. Physical Review, 476(1969).

[6] R T HARLEY, W HAYES, A M PERRY et al. The phase transitions of PrAlO₃. Journal of Physics C: Solid State Physics, 2382(1973).

[7] R T HARLEY. Mechanism of 118.5 K phase transition in PrAlO₃. Journal of Physics C: Solid State Physics, L205(1977).

[8] C J HOWARD, B J KENNEDY, B C CHAKOUMAKOS. Neutron powder diffraction study of rhombohedral rare-earth aluminates and the rhombohedral to cubic phase transition. Journal of Physics- Condensed Matter, 349(2000).

[9] S M MOUSSA, B J KENNEDY, B A HUNTER et al. Low temperature structural studies on PrAlO₃. Journal of Physics- Condensed Matter(2001).

[10] D A PAWLAK, T LUKASIEWICZ, M CARPENTER et al. Czochralski crystal growth, microstructure and spectroscopic properties of PrAlO₃ perovskite. Journal of Crystal Growth, 260(2005).

[11] A NOVOSELOV, A YOSHIKAWA, N SOLOVIEVA et al. Crystal growth, optical and luminescence properties of (Ce,Sr)-doped PrAlO₃ single crystals. Crystal Research and Technology, 1320(2007).

[12] M WENCKA, S VRTNIK, M JAGODIC et al. Observation of anomalous magnetism in the low-temperature monoclinic phase of single-crystalline PrAlO₃ perovskite. Physical Review B, 224410(2009).

[13] V SHRIVASTAVA, R NAGARAJAN. Consequences of Bi³⁺ introduction for Pr³⁺ in PrAlO₃. Journal of Materials Science, 15415(2020).

[14] C H KIM, S Y CHO, I T KIM et al. Twin structures in lanthanum, praseodymium, and neodymium aluminate ceramics. Materials Research Bulletin, 1561(2001).

[15] M F GAZULLA, M J VENTURA, C ANDREU et al. Praseodymium oxides. complete characterization by determining oxygen content. Microchemical Journal, 148: 291(2019).

[16] S FU, Z C YANG, H H LI et al. Effects of Gd₂O₃ and MgSiN₂ sintering additives on the thermal conductivity and mechanical properties of Si₃N₄ ceramics. International Journal of Applied Ceramic Technology, 1855(2023).

[17] C CHEN, X Z YI, S ZHANG et al. Vacuum sintering of Tb₃Al₅O₁₂ transparent ceramics with combined TEOS+MgO sintering aids. Ceramics International, 12823(2015).

[18] W T JIA, Q L WEI, H B ZHANG et al. Comparative analyses of the influence of tetraethoxysilane additives on the sintering kinetics of Nd:YAG transparent ceramics. Journal of Materials Science-Materials in Electronics, 19218(2021).

[19] H Z TONG, N L WANG, Y Q ZOU et al. Densification and mechanical properties of YAG ceramics fabricated by air pressureless sintering. Journal of Electronic Materials, 374(2019).

[20] K M KINSMAN, J MCKITTRICK. Phase development and luminescence in chromium-doped yttrium aluminum garnet (YAG:Cr) phosphors. Journal of the American Ceramic Society, 2866(1994).

[21] H KLEMM. Silicon nitride for high-temperature applications. Journal of the American Ceramic Society, 1501(2010).

[22] Y N ZHANG. Co-precipitation Synthesis of Yb:YAG Nano-powders and Fabrication of Yb:YAG Transparent Ceramics(2015).

[23] A J STEVENSON, X LI, M A MARTINEZ et al. Effect of SiO₂ on densification and microstructure development in Nd:YAG transparent ceramics. Journal of the American Ceramic Society, 1380(2011).

[24] U KOLITSCH, H J SEIFERT, T LUDWIG et al. Phase equilibria and crystal chemistry in the Y₂O₃-Al₂O₃-SiO₂ system. Journal of Materials Research, 447(1999).

[25] G Z LU, X D SUN. Phase transformation, sintering and microstructures of transparent YAG ceramics doping TEOS. Chinese Journal of Nonferrous Metals, 1220(2010).

[26] G XU. Sintering Additives in Transparent Nd:YAG Ceramics in the Role and Performance Characterization. Xi'an: Master's Thesis of Xidian University(2014).

[27] A KUZJUKĒVIČS, K ISHIZAKI. Sintering of silicon nitride with YAIO₃ additive. Journal of the American Ceramic Society, 2373(1993).

[28] Q Y YANG, P F QIU, X SHI et al. Application of entropy engineering in thermoelectrics. Journal of Inorganic Materials, 347(2021).

[29] X GUO, Y R FENG, J X ZHAO et al. Neutron adsorption performance of Dy₂TiO₅ materials obtained from powders synthesized by the molten salt method. Ceramics International, 1975(2017).

[30] I AGENCY. Absorber materials, control rods and designs of shutdown systems for advanced liquid metal fast reactors. Proceeding of a Technical Committee Meeting.

[31] H S KIM, C Y JOUNG, B H LEE et al. Characteristics of Gd_xM_yO_z (M=Ti, Zr or Al) as a burnable absorber. Journal of Nuclear Materials, 340(2008).

[32] J H HUANG, G RAN, T J LIU et al. Microstructure and physical properties of Tb₂TiO₅ neutron absorber synthesized by ball milling and sintering. Journal of Materials Engineering and Performance, 4266(2016).

[33] X P SU, A B DU, X H HAN et al. Study on thermophysical properties of B₄C pellets used as control material in fast reactor. Shandong Ceramics, 3(2015).

[34] J M K RUDY. Comprehensive Nuclear Materials(2020).

[35] H X XIAO, C S LONG. Effect of Sn Addition to Ag-In-Cd Alloy on the Microstructure and Thermo-physical Properties. 2013 Annual Conference of Chinese Nuclear Society, Harbin.

[36] J Y GU, W G FAN, Z Q ZHANG et al. Structure and optical property of Pr₂O₃ powder prepared by reduction. Journal of Inorganic Materials, 771(2023).

[37] Q Y ZHANG, X Y HUANG. Recent progress in quantum cutting phosphors. Progress in Materials Science, 353(2010).